| Peer-Reviewed

Development of Microstrip Patch Antenna Design for S-Band Application

Received: 17 February 2018     Accepted: 7 March 2018     Published: 29 March 2018
Views:       Downloads:
Abstract

Microstrip patch antenna used to send onboard parameters of article to the ground while under operating conditions. The aim of the paper is to design as tacked nearly square microstrip patch antenna design for S band 2 GHz to 4 GHz and study the effect of antenna dimensions Length (L), and substrate parameters relative Dielectric constant (εr), substrate thickness (h) on the radiation parameters of Bandwidth and Beam-width. A stacked patch configuration is proposed to increase the narrow bandwidth, radiation efficiency and directivity. The proposed antenna is probe fed on a FR-4 substrate with dielectric constant of 4.4. At resonant frequency 2.42 GHz, antenna parameters like Return Loss, VSWR, Axial Ratio and Radiation pattern are verify and simulated on CST Microwave Studio by CST student edition.

Published in American Journal of Electromagnetics and Applications (Volume 6, Issue 1)
DOI 10.11648/j.ajea.20180601.13
Page(s) 17-23
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Electromagnetic Theory, CST Microwave Studio, Microstrip PatchAntenna, Stacked Patches, S-Band, Polarization

References
[1] G. A. Deschamps, "Microstrip Microwave Antennas," Proc. 3rdUSAF Symposium on Antennas, 1953.
[2] R. E. Munson, "Single Slot Cavity Antennas Assembly," U. S Patent No. 3713162, January 23, 1973.
[3] R. E. Munson, "Conformal Microstrip Antennas and Microstrip Phased Arrays," IEEE Trans. Antenna Propagation, Vol. AP-22, pp. 74-78, 1974.
[4] J. Q. Howell, "Microstrip Antennas," IEEE Trans. Antenna Propagation, Vol. AP-23, pp. 90-93, January 1975.
[5] D. M. Pozar, “Microstrip Antennas,” Proceedings of IEEE, Vol. 80, No. 1, January 1992.
[6] CST Microwave Studio by CST STUDIO SUIT STUDENT Version 2017.
[7] Microstrip Patch Antenna Design for KU Band Application, IFERT, ISSN:2278-0181, vol. 3 Issue 4, April, 2014.
[8] Stacked H-Shaped Microstrip Patch Antenna, IEEE Transactions On Antennas And Propagation, vol. 52, No. 4, April 2004.
[9] Warren L Stutzman_ Gary A Thiele-Antenna theory and design _ by Warren L. Stutzman and Gary A. Thiele.
[10] Antenna Theory, Analysis And Design, Third Edition by Constantine A. Balanis, Copyright 2005 by John Wiley & Sons, Inc.
[11] Design of Cirular Polarized Dual Band Patch Antenna by Thomas Edling, ISSN: 1654-7616, UPTEC E11008.
Cite This Article
  • APA Style

    Naw Khu Say Wah, Hla MyoTun. (2018). Development of Microstrip Patch Antenna Design for S-Band Application. American Journal of Electromagnetics and Applications, 6(1), 17-23. https://doi.org/10.11648/j.ajea.20180601.13

    Copy | Download

    ACS Style

    Naw Khu Say Wah; Hla MyoTun. Development of Microstrip Patch Antenna Design for S-Band Application. Am. J. Electromagn. Appl. 2018, 6(1), 17-23. doi: 10.11648/j.ajea.20180601.13

    Copy | Download

    AMA Style

    Naw Khu Say Wah, Hla MyoTun. Development of Microstrip Patch Antenna Design for S-Band Application. Am J Electromagn Appl. 2018;6(1):17-23. doi: 10.11648/j.ajea.20180601.13

    Copy | Download

  • @article{10.11648/j.ajea.20180601.13,
      author = {Naw Khu Say Wah and Hla MyoTun},
      title = {Development of Microstrip Patch Antenna Design for S-Band Application},
      journal = {American Journal of Electromagnetics and Applications},
      volume = {6},
      number = {1},
      pages = {17-23},
      doi = {10.11648/j.ajea.20180601.13},
      url = {https://doi.org/10.11648/j.ajea.20180601.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajea.20180601.13},
      abstract = {Microstrip patch antenna used to send onboard parameters of article to the ground while under operating conditions. The aim of the paper is to design as tacked nearly square microstrip patch antenna design for S band 2 GHz to 4 GHz and study the effect of antenna dimensions Length (L), and substrate parameters relative Dielectric constant (εr), substrate thickness (h) on the radiation parameters of Bandwidth and Beam-width. A stacked patch configuration is proposed to increase the narrow bandwidth, radiation efficiency and directivity. The proposed antenna is probe fed on a FR-4 substrate with dielectric constant of 4.4. At resonant frequency 2.42 GHz, antenna parameters like Return Loss, VSWR, Axial Ratio and Radiation pattern are verify and simulated on CST Microwave Studio by CST student edition.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Development of Microstrip Patch Antenna Design for S-Band Application
    AU  - Naw Khu Say Wah
    AU  - Hla MyoTun
    Y1  - 2018/03/29
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ajea.20180601.13
    DO  - 10.11648/j.ajea.20180601.13
    T2  - American Journal of Electromagnetics and Applications
    JF  - American Journal of Electromagnetics and Applications
    JO  - American Journal of Electromagnetics and Applications
    SP  - 17
    EP  - 23
    PB  - Science Publishing Group
    SN  - 2376-5984
    UR  - https://doi.org/10.11648/j.ajea.20180601.13
    AB  - Microstrip patch antenna used to send onboard parameters of article to the ground while under operating conditions. The aim of the paper is to design as tacked nearly square microstrip patch antenna design for S band 2 GHz to 4 GHz and study the effect of antenna dimensions Length (L), and substrate parameters relative Dielectric constant (εr), substrate thickness (h) on the radiation parameters of Bandwidth and Beam-width. A stacked patch configuration is proposed to increase the narrow bandwidth, radiation efficiency and directivity. The proposed antenna is probe fed on a FR-4 substrate with dielectric constant of 4.4. At resonant frequency 2.42 GHz, antenna parameters like Return Loss, VSWR, Axial Ratio and Radiation pattern are verify and simulated on CST Microwave Studio by CST student edition.
    VL  - 6
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Electronic Engineering, Yangon Technological University, Yangon, Republic of the Union of Myanmar

  • Department of Electronic Engineering, Yangon Technological University, Yangon, Republic of the Union of Myanmar

  • Sections