In this paper, an electromagnetic diode with TEM mode, such as MILO, is connected directly to a Dual Mirrored Slotted Array Antenna (DMSAA). To convert a donut-shaped pattern of the electromagnetic source into a directive pattern, mode converters have been used in the past. But their losses, weight, size, and cost additions impact negatively on total system performance. Due to not using any mode converters, this is useful. Given the input is an electromagnetic diode with a TEM output mode, a large bandwidth is unnecessary. Therefore, slot antennas are used. Usually, array antennas were commonly used to increase the directivity and beamforming at the output of mode converters. To convert a donate-shaped pattern into a directive, half of the aperture fields must be rotated 180°. Here, the diode outlet is connected to the DMSAA with an inherent phase difference of 180° of the electric fields. For this purpose, a power divider and a pair of narrow wall slotted array antennas (NWSAA) have been used. The antenna is simulated at 10GHz frequency. The results show a fully directive beam with a side lobe level (SLL) below -10dB. Also, S11 is -16.5dB, at 10GHz frequency. Because the mode converter is completely removed, this structure is very suitable for compact applications.
| Published in | American Journal of Electromagnetics and Applications (Volume 9, Issue 1) |
| DOI | 10.11648/j.ajea.20210901.11 |
| Page(s) | 1-6 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Slotted Array Antenna, Power Divider, Mode Converter, Coaxial Waveguide, Rectangular Waveguide, Directive Antenna
| [1] | S. J. Hosseini, R.-A. Sadeghzadeh, and H. Aliakbarian, “A TEM-TE11 mode-transducing sectoral antenna by using dual dielectric window,” International Journal of Electronics Letters, vol. 6, no. 4, pp. 403–412, Oct. 2018, doi: 10.1080/21681724.2017.1381997. |
| [2] | S. J. Hosseini, M. Dahmardeh, and M. Yousefian, “A high power TEM to TE10 mode converter with 70% bandwidth,” Journal of Electromagnetic Waves and Applications, vol. 0, no. 0, pp. 1–11, Nov. 2020, doi: 10.1080/09205071.2020.1842255. |
| [3] | S. J. Hosseini and H. Oraizi, “TEM-TE11 mode converter antenna like a pelican beak,” IET Microwaves, Antennas & Propagation, vol. 14, no. 9, pp. 934–942, Apr. 2020, doi: 10.1049/iet-map.2020.0017. |
| [4] | X.-Y. Wang, Y.-W. Fan, T. Shu, C. Yuan, and Q. Zhang, “A high-efficiency tunable TEM-TE11 mode converter for high-power microwave applications,” AIP Advances, vol. 7, no. 3, p. 035012, Mar. 2017, doi: 10.1063/1.4978863. |
| [5] | A. Chittora, S. Singh, A. Sharma, and J. Mukherjee, “A Novel $\rm TM01 to TE11 Mode Converter Designed With Radially Loaded Dielectric Slabs,” IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 4, pp. 1170–1175, Apr. 2016, doi: 10.1109/TMTT.2016.2536031. |
| [6] | X. Li, X.-Q. Li, Q.-X. Liu, and J.-Q. Zhang, “HIGH POWER OVER-MODE BENT WAVEGUIDES FOR CIRCULAR TM01 AND COAXIAL TEM MODE TRANSMISSION,” Progress In Electromagnetics Research M, vol. 60, pp. 189–196, Jan. 2017, doi: 10.2528/PIERM17080901. |
| [7] | S. J. Hosseini, and M. Dahmardeh, “Compact smile-like mode converter antenna with high power capacity level,” Electromagnetics, pp. 1–17, Mar. 2021, doi: 10.1080/02726343.2021.1903216. |
| [8] | M. M. Honari, R. Mirzavand, S. Aslanzadeh, H. Saghlatoon, and P. Mousavi, “Wideband Printed TM01 to TE11 Mode Converters,” IEEE Access, vol. 7, pp. 35438–35448, 2019, doi: 10.1109/ACCESS.2019.2904247. |
| [9] | J. W. Li, G. J. Deng, L. T. Guo, W. H. Huang, and H. Shao, “Polarization controllable TM01-TE11 mode converter for high power microwaves,” AIP Advances, vol. 8, no. 5, p. 055230, May 2018, doi: 10.1063/1.5026962. |
| [10] | X. Zhao, C. Yuan, L. Liu, S. Peng, H. Zhou, and D. Cai, “Solution to GW TEM-Circular Polarized TE11 Mode Converter Design for High Frequency Bands,” IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 2, pp. 432–437, Feb. 2017, doi: 10.1109/TMTT.2016.2616880. |
| [11] | Y. Sydorenko, S. Provalov, S. Shylo, and D. Wheeler, “Compact MMW-band Planar Diffraction Type Antennas for Various Applications,” American Journal of Electromagnetics and Applications, vol. 8, no. 1, Art. no. 1, Feb. 2020, doi: 10.11648/j.ajea.20200801.13. |
| [12] | A. Chittora, S. Singh, A. Sharma, and J. Mukherjee, “A TM01 to TE11 mode converter designed with semicircular waveguide sections,” in 2017 11th European Conference on Antennas and Propagation (EUCAP), Mar. 2017, pp. 1903–1906, doi: 10.23919/EuCAP.2017.7928152. |
| [13] | L. Yu, C. Yuan, J. He, and Q. Zhang, “Beam Steerable Array Antenna Based on Rectangular Waveguide for High-Power Microwave Applications,” IEEE Transactions on Plasma Science, vol. 47, no. 1, pp. 535–541, Jan. 2019, doi: 10.1109/TPS.2018.2884290. |
| [14] | B. Bandyopadhyay, S. Chatterjee, A. Majumder, and S. Chatterjee, “Narrow Wall Slotted Planar Array Antenna by using Differential Feed at X Band,” in 2019 IEEE Asia-Pacific Microwave Conference (APMC), Dec. 2019, pp. 521–523, doi: 10.1109/APMC46564.2019.9038641. |
| [15] | M. Yousefian, S. J. Hosseini, and M. Dahmardeh, “Compact broadband coaxial to rectangular waveguide transition,” Journal of Electromagnetic Waves and Applications, vol. 33, no. 9, pp. 1239–1247, Jun. 2019, doi: 10.1080/09205071.2019.1606737. |
| [16] | Moh. A. K. S. Lubis, C. Apriono, F. Y. Zulkifli, and E. T. Rahardjo, “Design of narrow wall slotted waveguide antenna for X-band application,” in 2017 Progress in Electromagnetics Research Symposium - Fall (PIERS - FALL), Nov. 2017, pp. 2625–2628, doi: 10.1109/PIERS-FALL.2017.8293579. |
| [17] | M. Dolati and M. S. Majedi, “A wideband 45° inclined linear polarization travelling-wave slot array antenna with broadside radiation pattern,” AEU - International Journal of Electronics and Communications, vol. 106, pp. 103–107, Jul. 2019, doi: 10.1016/j.aeue.2019.05.007. |
| [18] | Y. Y. Sun, S. W. Cheung, and T. I. Yuk, “An ISM/UWB Antenna with Offset feeding and Slotted Ground Plane for Body-centric Communications,” Journal of Electrical and Electronic Engineering, vol. 1, no. 2, Art. no. 2, Jan. 2014, doi: 10.11648/j.jeee.20130102.12. |
APA Style
Seyed Jalil Hosseini. (2021). Conversion Donut-Shaped Pattern to Directive Without Using Any Mode Converter. American Journal of Electromagnetics and Applications, 9(1), 1-6. https://doi.org/10.11648/j.ajea.20210901.11
ACS Style
Seyed Jalil Hosseini. Conversion Donut-Shaped Pattern to Directive Without Using Any Mode Converter. Am. J. Electromagn. Appl. 2021, 9(1), 1-6. doi: 10.11648/j.ajea.20210901.11
AMA Style
Seyed Jalil Hosseini. Conversion Donut-Shaped Pattern to Directive Without Using Any Mode Converter. Am J Electromagn Appl. 2021;9(1):1-6. doi: 10.11648/j.ajea.20210901.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajea.20210901.11,
author = {Seyed Jalil Hosseini},
title = {Conversion Donut-Shaped Pattern to Directive Without Using Any Mode Converter},
journal = {American Journal of Electromagnetics and Applications},
volume = {9},
number = {1},
pages = {1-6},
doi = {10.11648/j.ajea.20210901.11},
url = {https://doi.org/10.11648/j.ajea.20210901.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajea.20210901.11},
abstract = {In this paper, an electromagnetic diode with TEM mode, such as MILO, is connected directly to a Dual Mirrored Slotted Array Antenna (DMSAA). To convert a donut-shaped pattern of the electromagnetic source into a directive pattern, mode converters have been used in the past. But their losses, weight, size, and cost additions impact negatively on total system performance. Due to not using any mode converters, this is useful. Given the input is an electromagnetic diode with a TEM output mode, a large bandwidth is unnecessary. Therefore, slot antennas are used. Usually, array antennas were commonly used to increase the directivity and beamforming at the output of mode converters. To convert a donate-shaped pattern into a directive, half of the aperture fields must be rotated 180°. Here, the diode outlet is connected to the DMSAA with an inherent phase difference of 180° of the electric fields. For this purpose, a power divider and a pair of narrow wall slotted array antennas (NWSAA) have been used. The antenna is simulated at 10GHz frequency. The results show a fully directive beam with a side lobe level (SLL) below -10dB. Also, S11 is -16.5dB, at 10GHz frequency. Because the mode converter is completely removed, this structure is very suitable for compact applications.},
year = {2021}
}
TY - JOUR T1 - Conversion Donut-Shaped Pattern to Directive Without Using Any Mode Converter AU - Seyed Jalil Hosseini Y1 - 2021/03/30 PY - 2021 N1 - https://doi.org/10.11648/j.ajea.20210901.11 DO - 10.11648/j.ajea.20210901.11 T2 - American Journal of Electromagnetics and Applications JF - American Journal of Electromagnetics and Applications JO - American Journal of Electromagnetics and Applications SP - 1 EP - 6 PB - Science Publishing Group SN - 2376-5984 UR - https://doi.org/10.11648/j.ajea.20210901.11 AB - In this paper, an electromagnetic diode with TEM mode, such as MILO, is connected directly to a Dual Mirrored Slotted Array Antenna (DMSAA). To convert a donut-shaped pattern of the electromagnetic source into a directive pattern, mode converters have been used in the past. But their losses, weight, size, and cost additions impact negatively on total system performance. Due to not using any mode converters, this is useful. Given the input is an electromagnetic diode with a TEM output mode, a large bandwidth is unnecessary. Therefore, slot antennas are used. Usually, array antennas were commonly used to increase the directivity and beamforming at the output of mode converters. To convert a donate-shaped pattern into a directive, half of the aperture fields must be rotated 180°. Here, the diode outlet is connected to the DMSAA with an inherent phase difference of 180° of the electric fields. For this purpose, a power divider and a pair of narrow wall slotted array antennas (NWSAA) have been used. The antenna is simulated at 10GHz frequency. The results show a fully directive beam with a side lobe level (SLL) below -10dB. Also, S11 is -16.5dB, at 10GHz frequency. Because the mode converter is completely removed, this structure is very suitable for compact applications. VL - 9 IS - 1 ER -
Information
Email: