Theoretical and Experimental Investigation of Hydromechanical Extrusion Process

Olesya Yurevna Agapitova; Sergey Vasilievich Byvaltsev; Alexander Georgievich Zalazinski

doi:doi:10.11648/j.ajmie.20170201.13

| Peer-Reviewed

Theoretical and Experimental Investigation of Hydromechanical Extrusion Process

Olesya Yurevna Agapitova, Sergey Vasilievich Byvaltsev, Alexander Georgievich Zalazinski

Published in American Journal of Mechanical and Industrial Engineering (Volume 2, Issue 1)

Received: 26 October 2016 Accepted: 17 November 2016 Published: 29 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The theoretical and experimental investigation of the process of hydromechanical extrusion (HE) of aluminum alloys Al 5056 was carried out. The aim is to determine the optimal parameters of this process. These parameters were determined to minimize the extrusion force and damage factor of a workpiece by using explicit finite elements method. The results were presented in a visual form and were shown that use of active friction forces reduces the extrusion force. Statistical processing of the experimental data gave regression equations for definition the damage factor and the value of the specific extrusion stress.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 2, Issue 1)
DOI	10.11648/j.ajmie.20170201.13
Page(s)	17-23
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Hydromechanical Extrusion, Computer Simulation, Extrusion Force, Damage Factor

References

[1]	Zalazynskii, A. G. Plastic Deforming of Structurally Inhomogeneous Materials // Yekaterinburg: UrO RAN, 2000, 492 p.
[2]	Danilin, A. V. Investigation of the Stress-Strain State and the Particularities of the Metal Flow during Direct Pressing and SPAT Pressing of Hard-to-Deform Alloys// Russian Journal of Ferrous Metals, 2004, No. 5, p.45.
[3]	Kolmogorov, G. L., Mikhailov, V. G., Barcov, Yu. A., Karlinski, V. A. Hydropressing of Hard-to-Deform Refractory Metals and Alloys // Metallurgy, Moscow, 1991, 142 p.
[4]	Pachla, W., Kulczyk, M., Sus-Ryszkowska, M., Mazur, A., Kurzydlowski, K. J. J. Mater. Process. Technol., 205 (2008), p. 173.
[5]	Zherebtsov, S., Mazur, A., Salishchev. G., Lojkowski, W. Mater. Sci. Eng. A, 485 (2008), p. 39.
[6]	Zherebtsov, S., Salishchev, G., Łojkowski, W. Strengthening of a Ti–6Al–4V titanium alloy by means of hydrostatic extrusion and other methods, Materials Science and Engineering: A, Volume 515, Issues 1–2, 25 July 2009, Pages 43-48.
[7]	Bridgeman, P. W. Studies in large plastic flow and fracture, MC Graw-Hill, New-York, 1952.
[8]	Beresnev, B. I., Gaivoronskii, A. T., Zamaraev, V. K., and others. Hydraulic Forging // Yekaterinburg: Inst. Prikl. Mekh. UrO RAN, 1998–241 p.
[9]	Kolpashnikov, A. I., Vyalov, V. A. Hydraulic Forging of Metals // Moscow: Metallurgiya, 1973.
[10]	Zalazinskii, A. G., Byvaltsev, S. V., Zalazinskaya, E. A., Agapitova O. U. Modelling of process of hydromechanical extrusion // Electronic Journal "Investigated in Russia", 2010, no. 13, p. 542-551.
[11]	Agapitova, O. U., Byvaltsev, S. V., Zalazinskii, A. G. Improvement of hydromechanical extrusion of non-ferrous metals // Russion Journal of Non-ferrous Metals, 2011, no. 52 (4), p. 382-387.
[12]	Agapitova, O. U., Byvaltsev, S. V., Zalazinskii, A. G. Features of processes of direct and hydromechanical extrusion billets // Forging and Stamping Production. Material Working by Pressure, 2013, no. 10, p. 36-40.
[13]	Agapitova, O. U., Byvaltsev, S. V., Zalazinskii, A. G. Determination of rheological properties of plastoparaffin for simulation of metal forming processes // Handbook. An Engineering journal with appendix, 2012, no. 12 (189), p. 3-5.
[14]	Byvaltsev, S. V., Zalazinskii, A. G., Polakov, A. P. Intelligent control system is the pressing process // Handbook. An Engineering journal with appendix, 2008, no. 9, p. 43-48.
[15]	Byvaltsev, S. V., Zalazinskii, A. G., Polakov A. P. Experimentaly-analytical method for the determination of damage in composite drawing process // Universities Proceedings. Non-ferrous metallurgy, 2008, no. 4, p. 26-32.
[16]	Byvaltsev, S. V., Zalazinskii, A. G. The program complex mathematical metal forming process simulation // State Fund of algorithms and programs, no. 50200702222.
[17]	Agapitova, O. U., Byvaltsev, S. V., Zalazinskii, A. G. Computer-aided design tools based on modeling technology of extrusion of metals // Software & Systems, 2012, no. 3, p. 228-233.
[18]	Tinkir, M., Dilmec, M., Turkoz, M., Halkaci, H. S. Investigation of the effect of hydromechanical deep drawing process parameters on formability of AA5754 sheets metals by using neuro-fuzzy forecasting approach // Journal of Intelligent & Fuzzy Systems, 2015, no. 28 (2), p. 647-659.
[19]	Zalazinskii, A. G., Byvaltsev, S. V. Program Complex for Realization of the Experimental and Analytical Method of Modeling the Processes of Metal Workpieces Deformation // Vestn. Komp. Inf. Tekhnol., 2006, no. 11, p. 46-51.
[20]	12Kolmogorov, V. L. Mechanics of Pressure Treatment of Metals // Yekaterinburg: UGTU-UPI, 2001, 836 p.

Cite This Article

Plain Text BibTeX RIS

APA Style

Olesya Yurevna Agapitova, Sergey Vasilievich Byvaltsev, Alexander Georgievich Zalazinski. (2016). Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. American Journal of Mechanical and Industrial Engineering, 2(1), 17-23. https://doi.org/10.11648/j.ajmie.20170201.13

Copy | Download

ACS Style

Olesya Yurevna Agapitova; Sergey Vasilievich Byvaltsev; Alexander Georgievich Zalazinski. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. Am. J. Mech. Ind. Eng. 2016, 2(1), 17-23. doi: 10.11648/j.ajmie.20170201.13

Copy | Download

AMA Style

Olesya Yurevna Agapitova, Sergey Vasilievich Byvaltsev, Alexander Georgievich Zalazinski. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. Am J Mech Ind Eng. 2016;2(1):17-23. doi: 10.11648/j.ajmie.20170201.13

Copy | Download

@article{10.11648/j.ajmie.20170201.13,
  author = {Olesya Yurevna Agapitova and Sergey Vasilievich Byvaltsev and Alexander Georgievich Zalazinski},
  title = {Theoretical and Experimental Investigation of Hydromechanical Extrusion Process},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {2},
  number = {1},
  pages = {17-23},
  doi = {10.11648/j.ajmie.20170201.13},
  url = {https://doi.org/10.11648/j.ajmie.20170201.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20170201.13},
  abstract = {The theoretical and experimental investigation of the process of hydromechanical extrusion (HE) of aluminum alloys Al 5056 was carried out. The aim is to determine the optimal parameters of this process. These parameters were determined to minimize the extrusion force and damage factor of a workpiece by using explicit finite elements method. The results were presented in a visual form and were shown that use of active friction forces reduces the extrusion force. Statistical processing of the experimental data gave regression equations for definition the damage factor and the value of the specific extrusion stress.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Theoretical and Experimental Investigation of Hydromechanical Extrusion Process
AU  - Olesya Yurevna Agapitova
AU  - Sergey Vasilievich Byvaltsev
AU  - Alexander Georgievich Zalazinski
Y1  - 2016/12/29
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20170201.13
DO  - 10.11648/j.ajmie.20170201.13
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 17
EP  - 23
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20170201.13
AB  - The theoretical and experimental investigation of the process of hydromechanical extrusion (HE) of aluminum alloys Al 5056 was carried out. The aim is to determine the optimal parameters of this process. These parameters were determined to minimize the extrusion force and damage factor of a workpiece by using explicit finite elements method. The results were presented in a visual form and were shown that use of active friction forces reduces the extrusion force. Statistical processing of the experimental data gave regression equations for definition the damage factor and the value of the specific extrusion stress.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Olesya Yurevna Agapitova

Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
Sergey Vasilievich Byvaltsev

Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
Alexander Georgievich Zalazinski

Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Olesya Yurevna Agapitova, Sergey Vasilievich Byvaltsev, Alexander Georgievich Zalazinski. (2016). Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. American Journal of Mechanical and Industrial Engineering, 2(1), 17-23. https://doi.org/10.11648/j.ajmie.20170201.13

Copy | Download

ACS Style

Olesya Yurevna Agapitova; Sergey Vasilievich Byvaltsev; Alexander Georgievich Zalazinski. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. Am. J. Mech. Ind. Eng. 2016, 2(1), 17-23. doi: 10.11648/j.ajmie.20170201.13

Copy | Download

AMA Style

Olesya Yurevna Agapitova, Sergey Vasilievich Byvaltsev, Alexander Georgievich Zalazinski. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process. Am J Mech Ind Eng. 2016;2(1):17-23. doi: 10.11648/j.ajmie.20170201.13

Copy | Download

@article{10.11648/j.ajmie.20170201.13,
  author = {Olesya Yurevna Agapitova and Sergey Vasilievich Byvaltsev and Alexander Georgievich Zalazinski},
  title = {Theoretical and Experimental Investigation of Hydromechanical Extrusion Process},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {2},
  number = {1},
  pages = {17-23},
  doi = {10.11648/j.ajmie.20170201.13},
  url = {https://doi.org/10.11648/j.ajmie.20170201.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20170201.13},
  abstract = {The theoretical and experimental investigation of the process of hydromechanical extrusion (HE) of aluminum alloys Al 5056 was carried out. The aim is to determine the optimal parameters of this process. These parameters were determined to minimize the extrusion force and damage factor of a workpiece by using explicit finite elements method. The results were presented in a visual form and were shown that use of active friction forces reduces the extrusion force. Statistical processing of the experimental data gave regression equations for definition the damage factor and the value of the specific extrusion stress.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Theoretical and Experimental Investigation of Hydromechanical Extrusion Process
AU  - Olesya Yurevna Agapitova
AU  - Sergey Vasilievich Byvaltsev
AU  - Alexander Georgievich Zalazinski
Y1  - 2016/12/29
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20170201.13
DO  - 10.11648/j.ajmie.20170201.13
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 17
EP  - 23
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20170201.13
AB  - The theoretical and experimental investigation of the process of hydromechanical extrusion (HE) of aluminum alloys Al 5056 was carried out. The aim is to determine the optimal parameters of this process. These parameters were determined to minimize the extrusion force and damage factor of a workpiece by using explicit finite elements method. The results were presented in a visual form and were shown that use of active friction forces reduces the extrusion force. Statistical processing of the experimental data gave regression equations for definition the damage factor and the value of the specific extrusion stress.
VL  - 2
IS  - 1
ER  -

Copy | Download