In industries, organizations, and homes, liquids are conveyed for different purposes. It may be for industrial purposes or domestic purposes. The process involved in conveying liquid can make the liquid safe or unsafe for the purpose for which the liquid is intended to be used. Most industries use centrifugal pumps in pumping liquids. The use of centrifugal pumps in industries, organizations, and homes depends on the output pressure needed. Usually, the centrifugal pumps which are used for domestic purposes have a maximum capacity of four horsepower (4hp) as output power. the mass flow rate of water is different from that of diesel, engine oil, and hydraulic oil. Therefore, a centrifugal pump with a specific horsepower will handle each liquid differently, especially in relation to its volumetric flow rates. The study analyzed the volumetric flow rate of different liquids like water, hydraulic oil, engine oil, and diesel from a centrifugal pump of a specific capacity within specific periods. A volume of 40 m3 of one of the liquids under study was put into the bucket. The end of the hose connected to the suction nozzle was placed inside the bucket containing the liquid. The other end of the hose connected to the discharge nozzle was also placed into the measuring container. The pump was then switched on. The timer was connected to switch off the pump every 30 seconds. The highest volume of liquid that the pump pumped is water at a mean volume of 49.5860 m3. The mean volume obtained after performing the experiments on diesel is 48.0800 m3 which is lower than that of water. the mean volume of hydraulic oil and engine oil are 31.850 m3 and 25.8100 m3. The differences in the kg/m3 of the various liquid under study affect the velocity at which the liquids move when pumped. The head of each liquid is proportional to the mass of the liquid and the viscosity of each liquid is proportional to the volumetric flow of the liquid.
| Published in | American Journal of Mechanical and Industrial Engineering (Volume 7, Issue 5) |
| DOI | 10.11648/j.ajmie.20220705.11 |
| Page(s) | 70-76 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Conveying Liquids, Centrifugal Pump, Volumetric Flow Rate
| [1] | F. Ansori and E. Widodo, “Analysis on Centrifugal Pump Performance in Single, Serial, and Parallel,” J. Energy, Mech. Mater. Manuf. Eng., vol. 3, no. 2, p. 79, 2018, doi: 10.22219/jemmme.v3i2.6958. |
| [2] | “Pump Life Cycle Costs: A guide to LCC analysis for pumping systems,” 2001. [Online]. Available: http://www1.eere.energy.gov/industry/bestpractices/techpubs_motors.htm. |
| [3] | S. Menon, “Centrifugal Pump Analysis,” Woodcliff Lake, NJ, 2012. |
| [4] | H. Z. Kister, “Distillation Design,” vol. 710, pp. 255–256, 1994, [Online]. Available: https://onlinelibrary.wiley.com/doi/10.1002/apj.5500020411. |
| [5] | O. M. Martens, O. Oldervik, B. O. Neeraas, and T. Strøm, “Control of VOC emissions from crude oil tankers,” Mar. Technol. SNAME News, vol. 38, no. 3, pp. 208–217, 2001, doi: 10.5957/mt1.2001.38.3.208. |
| [6] | A. Adeniyi and O. Komolafe, “Performance Analysis of an Experimental Centrifugal Pump,” Niger. J. Technol., vol. 33, no. 2, p. 149, 2014, doi: 10.4314/njt.v33i2.2. |
| [7] | S. Chaurette, “Pump and Pumping System (iso-efficiency),” Bur. Energy Effic., pp. 113–134, 2003. |
| [8] | M. Sahdev, “Centrifugal Pumps : Basic Concepts of Operation, Maintenance, and Troubleshooting (Part- II, Understanding Cavitation) Introduction Concept of Cavitation,” pp. 1–16, [Online]. Available: http://www.plant-maintenance.com/articles/centrifugalpumpsb1.pdf. |
| [9] | P. G. Kini, R. C. Bansal, and R. S. Aithal, “Performance analysis of centrifugal pumps subjected to voltage variation and unbalance,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 562–569, 2008, doi: 10.1109/TIE.2007.911947. |
| [10] | “User Manual Pedrollo Centrifugal Pump,” 2009. [Online]. Available: https://www.pedrollo.com/public/allegati/HF Medie portate_EN_50Hz.pdf. |
| [11] | F. E. Selamat, W. H. I. Wan Izhan, and B. S. Baharudin, “Design and analysis of centrifugal pump impeller for performance enhancement,” J. Mech. Eng., vol. 5, no. Specialissue2, pp. 36–53, 2018. |
| [12] | Subash K and Muthukumor K, “Design and analysis of centrifugal Impeller,” MAT, vol. 4, no. 2, pp. 283–288, 2019, doi: 10.1201/9780203713143-43. |
| [13] | V. Dirisala, “Performance Analysis of Centrifugal Pump by using CFD,” vol. 8, no. 10, pp. 474–483, 2017, [Online]. Available: http://iaeme.com/Home/journal/IJMET474editor@iaeme.comhttp://iaeme.com/Home/issue/IJMET?Volume=8&Issue=10http://iaeme.com. |
| [14] | A. R. Al-Obaidi, “Monitoring the performance of centrifugal pump under single-phase and cavitation condition: A CFD analysis of the number of impeller blades,” J. Appl. Fluid Mech., vol. 12, no. 2, pp. 445–459, 2019, doi: 10.29252/jafm.12.02.29303. |
| [15] | C. Jiang, B. A. Fleck, and M. G. Lipsett, “Rapid wear modelling in a slurry pump using soft 3D impeller material,” Energies, vol. 13, no. 12, 2020, doi: 10.3390/en13123264. |
| [16] | R. Tarodiya and B. K. Gandhi, “Hydraulic performance and erosive wear of centrifugal slurry pumps - A review,” Powder Technol., vol. 305, pp. 27–38, 2017, doi: 10.1016/j.powtec.2016.09.048. |
| [17] | Y. Wang, M. J. Zuo, and X. Fan, “Design of an Experimental System for Wear Assessment of Slurry Pumps,” Proc. Can. Eng. Educ. Assoc., vol. 4466, no. 780, 2011, doi: 10.24908/pceea.v0i0.3934. |
| [18] | A. Martin-Candilejo, D. Santillán, and L. Garrote, “Pump efficiency analysis for proper energy assessment in optimization of water supply systems,” Water (Switzerland), vol. 12, no. 1, 2020, doi: 10.3390/w12010132. |
| [19] | K. Räbiger, T. M. A. Maksoud, J. Ward, and G. Hausmann, “Theoretical and experimental analysis of a multiphase screw pump, handling gas-liquid mixtures with very high gas volume fractions,” Exp. Therm. Fluid Sci., vol. 32, no. 8, pp. 1694–1701, 2008, doi: 10.1016/j.expthermflusci.2008.06.009. |
| [20] | A. R. P. and A. J. Atiq Ur Rehman, “Performance Analysis and Cavitation Prediction of Centrifugal Pump Using Various Working Fluids,” Bentham Sci., vol. 12, no. 3, pp. 227–239, 2019, doi: https://dx.doi.org/10.2174/2212797612666190619161711. |
| [21] | B. L. S. Anderson, “Double Volute Pumps,” Pumps Syst., [Online]. Available: http://www.plad.com/brochures/press2.pdf. |
| [22] | S. Ghidhan, M. Hamed, and M. Benaros, “Effects of Different Fluids Properties on Cavitation Performance in Centrifugal Pump,” vol. 2, pp. 422–429, 2018, doi: 10.21467/proceedings.4.9. |
APA Style
Joseph Jerry Quaye, Francis Donkor. (2022). Analyzing the Performance of Alternating Current (AC) Single Phase Centrifugal Pump in Handling Different Types of Liquids. American Journal of Mechanical and Industrial Engineering, 7(5), 70-76. https://doi.org/10.11648/j.ajmie.20220705.11
ACS Style
Joseph Jerry Quaye; Francis Donkor. Analyzing the Performance of Alternating Current (AC) Single Phase Centrifugal Pump in Handling Different Types of Liquids. Am. J. Mech. Ind. Eng. 2022, 7(5), 70-76. doi: 10.11648/j.ajmie.20220705.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajmie.20220705.11,
author = {Joseph Jerry Quaye and Francis Donkor},
title = {Analyzing the Performance of Alternating Current (AC) Single Phase Centrifugal Pump in Handling Different Types of Liquids},
journal = {American Journal of Mechanical and Industrial Engineering},
volume = {7},
number = {5},
pages = {70-76},
doi = {10.11648/j.ajmie.20220705.11},
url = {https://doi.org/10.11648/j.ajmie.20220705.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20220705.11},
abstract = {In industries, organizations, and homes, liquids are conveyed for different purposes. It may be for industrial purposes or domestic purposes. The process involved in conveying liquid can make the liquid safe or unsafe for the purpose for which the liquid is intended to be used. Most industries use centrifugal pumps in pumping liquids. The use of centrifugal pumps in industries, organizations, and homes depends on the output pressure needed. Usually, the centrifugal pumps which are used for domestic purposes have a maximum capacity of four horsepower (4hp) as output power. the mass flow rate of water is different from that of diesel, engine oil, and hydraulic oil. Therefore, a centrifugal pump with a specific horsepower will handle each liquid differently, especially in relation to its volumetric flow rates. The study analyzed the volumetric flow rate of different liquids like water, hydraulic oil, engine oil, and diesel from a centrifugal pump of a specific capacity within specific periods. A volume of 40 m3 of one of the liquids under study was put into the bucket. The end of the hose connected to the suction nozzle was placed inside the bucket containing the liquid. The other end of the hose connected to the discharge nozzle was also placed into the measuring container. The pump was then switched on. The timer was connected to switch off the pump every 30 seconds. The highest volume of liquid that the pump pumped is water at a mean volume of 49.5860 m3. The mean volume obtained after performing the experiments on diesel is 48.0800 m3 which is lower than that of water. the mean volume of hydraulic oil and engine oil are 31.850 m3 and 25.8100 m3. The differences in the kg/m3 of the various liquid under study affect the velocity at which the liquids move when pumped. The head of each liquid is proportional to the mass of the liquid and the viscosity of each liquid is proportional to the volumetric flow of the liquid.},
year = {2022}
}
TY - JOUR T1 - Analyzing the Performance of Alternating Current (AC) Single Phase Centrifugal Pump in Handling Different Types of Liquids AU - Joseph Jerry Quaye AU - Francis Donkor Y1 - 2022/11/30 PY - 2022 N1 - https://doi.org/10.11648/j.ajmie.20220705.11 DO - 10.11648/j.ajmie.20220705.11 T2 - American Journal of Mechanical and Industrial Engineering JF - American Journal of Mechanical and Industrial Engineering JO - American Journal of Mechanical and Industrial Engineering SP - 70 EP - 76 PB - Science Publishing Group SN - 2575-6060 UR - https://doi.org/10.11648/j.ajmie.20220705.11 AB - In industries, organizations, and homes, liquids are conveyed for different purposes. It may be for industrial purposes or domestic purposes. The process involved in conveying liquid can make the liquid safe or unsafe for the purpose for which the liquid is intended to be used. Most industries use centrifugal pumps in pumping liquids. The use of centrifugal pumps in industries, organizations, and homes depends on the output pressure needed. Usually, the centrifugal pumps which are used for domestic purposes have a maximum capacity of four horsepower (4hp) as output power. the mass flow rate of water is different from that of diesel, engine oil, and hydraulic oil. Therefore, a centrifugal pump with a specific horsepower will handle each liquid differently, especially in relation to its volumetric flow rates. The study analyzed the volumetric flow rate of different liquids like water, hydraulic oil, engine oil, and diesel from a centrifugal pump of a specific capacity within specific periods. A volume of 40 m3 of one of the liquids under study was put into the bucket. The end of the hose connected to the suction nozzle was placed inside the bucket containing the liquid. The other end of the hose connected to the discharge nozzle was also placed into the measuring container. The pump was then switched on. The timer was connected to switch off the pump every 30 seconds. The highest volume of liquid that the pump pumped is water at a mean volume of 49.5860 m3. The mean volume obtained after performing the experiments on diesel is 48.0800 m3 which is lower than that of water. the mean volume of hydraulic oil and engine oil are 31.850 m3 and 25.8100 m3. The differences in the kg/m3 of the various liquid under study affect the velocity at which the liquids move when pumped. The head of each liquid is proportional to the mass of the liquid and the viscosity of each liquid is proportional to the volumetric flow of the liquid. VL - 7 IS - 5 ER -
Information
Email: