Welding is a method of joining similar and dissimilar metals through the use of coalescence. GMAW is a semi-mechanized, fully-mechanized, or automatic process that is widely used in fabrication. GMAW is expected to evolve further to allow for better arc control, bead contour control, deposition control, and higher productivity. The goal of this study is to enhance welding process variables for dissimilar steel metal joints made of duplex stainless steel (DSS) to ASTM/UNS S32205 and erosional steel CORTEN-A to ASTM A242. Such a dissimilar metal joint finds use in the transportation sector, particularly in the construction of rail cars. The square butt joint between two 2 mm-thick sheets was investigated using the gas metal arc welding (GMAW) process with CO2 as the shielding gas and flux-cored wire of grade 309L as the filler material. The L9 Taguchi array was used to optimize the tensile strength of the resulting weld joint, which was the desired quality characteristic. GMAW process parameters such as voltage, wire feed rate, and welding speed are optimized at three levels. Using ANOVA, the effects of each factor have been studied. It was found that the ideal set of parameters exists and that the voltage is the most crucial factor. A confirmation test was performed to validate the results, and it was accompanied by a figure and tables.
| Published in | American Journal of Mechanical and Industrial Engineering (Volume 8, Issue 1) |
| DOI | 10.11648/j.ajmie.20230801.11 |
| Page(s) | 1-6 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
CORTEN Steel, Dissimilar Welding, Duplex Stainless Steel, GMAW Process, Optimization
| [1] | Piotr Gotkowski et al. “Duplex Steel Welding in Construction of Railway Vehicles”, Welding International-2013, selected from Bileteyn Instytytu Spawalinictiva 2011 (5), pp 43-47, 2013. |
| [2] | Kah. P and Martikainen. J, “Current Trends In Welding Processes And Materials: Improve In Effectiveness”, Rev. Adv. Mater. Sci. Lappeenranta University of Technology, Lappeenranta, Finland, pp 189-200, 2012. |
| [3] | Bravo Ivan Mendoza et al. “Dissimilar Welding of Super Duplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW” Scientific Research, published online July 2010 (http://www.SciRP.org/journal/eng), pp-520-528, 2010. |
| [4] | Anoop. C. A, Pawan Kumar, ‘Application of Taguchi Methods and ANOVA in GTAW Process Parameters Optimization for Aluminium Alloy 7039’, International Journal of Engineering and Innovative Technology (IJEIT) Volume 2, Issue 11, pp-54-58, 2013. |
| [5] | Lenin N., et al. “Process Parameter Optimization in ARC Welding of Dissimilar Metals”, Thammasat International Journal of Science and Technology. Vol. 15, No. 3, pp 1-7, 2010. |
| [6] | Taban. E, et al. “Evaluation of Dissimilar Welds between Ferritic Stainless Steel Modified 12% Cr and Carbon Steel S355”, Welding Research Journal of American Welding Society, pp 291S-297S, 2008. |
| [7] | Elin M. Westin (2010), ‘Microstructure and properties of welds in the lean duplex stainless steel LDX 2101’, Scientific thesis for the degree of Doctorate of Engineering Royal Institute of Technology, Department of Materials Science and Engineering, ISBN 978-91-7415-801-4, SE-100 44 Stockholm, Sweden, pp 10-59, 2010. |
| [8] | S. P. Tewari et al. “Effect of Welding Parameters On The Weldability of Material”, International Journal of Engineering Science and Technology Vol. 2 (4), pp 512-516, 2010. |
| [9] | S. V. Sapakal and M. T. Telsang, “Parametric Optimization Of MIG Welding Using Taguchi Design Method”, International Journal of Advanced Engineering Research and Studies, Vol. 1 (4), pp. 28-30, July- September 2012. |
| [10] | Suban M., Tusek J. “Dependence of melting rate in MIG/MAG welding on the type of shielding gas used”, Journal of Mater. Process. Technol, pp 119-185-192, doi: 10.1016/S0924-0136(01)00940-2, (2001). |
| [11] | Pal S, Malviya S, Pal SK, et al. “Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method”, Int J Adv Manuf Technol, 44, pp 1250-1260, doi: 10.1007/s00170-009-1931-0, (2009). |
| [12] | Weglski. M. St, et al. “Effect of welding current on metal transfer in GMAW”, International Science Journal of World Academy of Materials and Manufacturing Engineering, Volume 33, Issue 1 pp 49-56, (2008). |
| [13] | J. Labanowski, et al. “Mechanical properties and corrosion resistance of dissimilar stainless steel welds”, Journal of Archives of Materials Science and Engineering, Volume 28, Issue 1, pp 27-33, (2007). |
| [14] | Cui N, Chen S, Xu T, Sun W, Lv B, Zhang S, Niu H, Kong F. The Microstructure, Mechanical Properties, and Corrosion Resistance of a Novel Extruded Titanium Alloy. Metals. 2022; 12 (10): 1564. https://doi.org/10.3390/met12101564 |
| [15] | Na Gong, Hui-Bin Wu, Zhi-Chen Yu, Gang Niu and Da Zhang, “Studying Mechanical Properties and Micro Deformation of Ultrafine-Grained Structures in Austenitic Stainless Steel”, Journal of Metals, doi: 10.3390/met7060188. |
APA Style
Fasil Kebede Tesfaye. (2023). Parameter Optimization of Gas Metal Arc Welding Process for Welding Dissimilar Steels. American Journal of Mechanical and Industrial Engineering, 8(1), 1-6. https://doi.org/10.11648/j.ajmie.20230801.11
ACS Style
Fasil Kebede Tesfaye. Parameter Optimization of Gas Metal Arc Welding Process for Welding Dissimilar Steels. Am. J. Mech. Ind. Eng. 2023, 8(1), 1-6. doi: 10.11648/j.ajmie.20230801.11
AMA Style
Fasil Kebede Tesfaye. Parameter Optimization of Gas Metal Arc Welding Process for Welding Dissimilar Steels. Am J Mech Ind Eng. 2023;8(1):1-6. doi: 10.11648/j.ajmie.20230801.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajmie.20230801.11,
author = {Fasil Kebede Tesfaye},
title = {Parameter Optimization of Gas Metal Arc Welding Process for Welding Dissimilar Steels},
journal = {American Journal of Mechanical and Industrial Engineering},
volume = {8},
number = {1},
pages = {1-6},
doi = {10.11648/j.ajmie.20230801.11},
url = {https://doi.org/10.11648/j.ajmie.20230801.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20230801.11},
abstract = {Welding is a method of joining similar and dissimilar metals through the use of coalescence. GMAW is a semi-mechanized, fully-mechanized, or automatic process that is widely used in fabrication. GMAW is expected to evolve further to allow for better arc control, bead contour control, deposition control, and higher productivity. The goal of this study is to enhance welding process variables for dissimilar steel metal joints made of duplex stainless steel (DSS) to ASTM/UNS S32205 and erosional steel CORTEN-A to ASTM A242. Such a dissimilar metal joint finds use in the transportation sector, particularly in the construction of rail cars. The square butt joint between two 2 mm-thick sheets was investigated using the gas metal arc welding (GMAW) process with CO2 as the shielding gas and flux-cored wire of grade 309L as the filler material. The L9 Taguchi array was used to optimize the tensile strength of the resulting weld joint, which was the desired quality characteristic. GMAW process parameters such as voltage, wire feed rate, and welding speed are optimized at three levels. Using ANOVA, the effects of each factor have been studied. It was found that the ideal set of parameters exists and that the voltage is the most crucial factor. A confirmation test was performed to validate the results, and it was accompanied by a figure and tables.},
year = {2023}
}
TY - JOUR T1 - Parameter Optimization of Gas Metal Arc Welding Process for Welding Dissimilar Steels AU - Fasil Kebede Tesfaye Y1 - 2023/01/31 PY - 2023 N1 - https://doi.org/10.11648/j.ajmie.20230801.11 DO - 10.11648/j.ajmie.20230801.11 T2 - American Journal of Mechanical and Industrial Engineering JF - American Journal of Mechanical and Industrial Engineering JO - American Journal of Mechanical and Industrial Engineering SP - 1 EP - 6 PB - Science Publishing Group SN - 2575-6060 UR - https://doi.org/10.11648/j.ajmie.20230801.11 AB - Welding is a method of joining similar and dissimilar metals through the use of coalescence. GMAW is a semi-mechanized, fully-mechanized, or automatic process that is widely used in fabrication. GMAW is expected to evolve further to allow for better arc control, bead contour control, deposition control, and higher productivity. The goal of this study is to enhance welding process variables for dissimilar steel metal joints made of duplex stainless steel (DSS) to ASTM/UNS S32205 and erosional steel CORTEN-A to ASTM A242. Such a dissimilar metal joint finds use in the transportation sector, particularly in the construction of rail cars. The square butt joint between two 2 mm-thick sheets was investigated using the gas metal arc welding (GMAW) process with CO2 as the shielding gas and flux-cored wire of grade 309L as the filler material. The L9 Taguchi array was used to optimize the tensile strength of the resulting weld joint, which was the desired quality characteristic. GMAW process parameters such as voltage, wire feed rate, and welding speed are optimized at three levels. Using ANOVA, the effects of each factor have been studied. It was found that the ideal set of parameters exists and that the voltage is the most crucial factor. A confirmation test was performed to validate the results, and it was accompanied by a figure and tables. VL - 8 IS - 1 ER -
Information
Email: