Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud

Akintola Abidemi Sarah; Arigbe Titi Ebidiseghabofa

doi:doi:10.11648/j.ajmme.20210501.14

| Peer-Reviewed

Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud

Akintola Abidemi Sarah, Arigbe Titi Ebidiseghabofa

Published in American Journal of Mechanical and Materials Engineering (Volume 5, Issue 1)

Received: 8 January 2021 Accepted: 21 January 2021 Published: 17 March 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

It is important to understand the properties influencing the efficiency of a drilling fluid while drilling for oil and gas. As a result, drilling fluid must be designed in order to comply with three important requirements which are easy to use, cost effective and being environmentally friendly. Several studies have been carried out on the use of local materials as suitable substitute for imported additives. This study focuses on the use of starch processed from local cassava (Manihot esculenta Crant), (TME 419) using the process of wet milling and dried using three different methods namely: oven drying, direct heating and sun drying Due to this short coming resulting from the use of native starch, the starch was chemically modified using the process of esterification before being used as additive for treatment of the water-based drilling. The mud samples were prepared using Wyoming bentonite and distil water as the base fluid. Varying concentration of additives (0.5, 1.0 and 1.5 g) were added to the different mud samples and the laboratory test carried out in accordance with the API Recommended Practice 13B at varying temperatures (30, 50.70 and 90°C). The various mud samples rheological properties was determined using a Fann35A rheometer and the filtration properties using a low –Temperature and High –Pressure API Filter Press at 100 psi with a 3.5” filter paper. The mud samples labelled labeled A, B and C were treated with oven dry, direct heat and sundry modified starches, respectively. While two control mud samples were prepared using low viscous Carboxymethyl cellulose for mud sample D and extra high viscous CMC in sample E. Although the Viscosity and fluid loss profiles result of the mud samples comparable performance with that of the commercial CMC’s. However, mud samples treated with oven dried starches presented the best results in their rheological as well as fluid loss properties

Published in	American Journal of Mechanical and Materials Engineering (Volume 5, Issue 1)
DOI	10.11648/j.ajmme.20210501.14
Page(s)	18-22
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Cassava Starch, Carboxymethyl Cellulose, Fluid Loss, Rheology, Esterification

References

[1]	Smith, Alison M. (2001). "The Biosynthesis of Starch Granules". Biomacromolecules. 2 (2): 335–41. doi: 10.1021/bm000133c. PMID 11749190.
[2]	Ismail, I., and Abdul Kadir, A. A. (1998) “The Importance of Implementing Proper Mixing Procedures in The Preparation of HEC and Corn Starch Mixtures for Controlling Fluid Loss”. Proceedings of International Conference on Mixing and Crystallization. April 22-25. Tioman Island, Malaysia: UTM, 1-8.
[3]	Amanullah, M., and Yu, L. (2004). “Superior Cornbased Starches for Oil Field Application”. Proceedings of the 4th International Crop Science Congress. September 26 – October 1. Brisbane, Australia: ICSC, 1-6.
[4]	Akintunde B. O. and Tunde-Akintunde T. Y. (2013): Effect Of Drying Method And Variety On Quality Of Cassava Starch Extracts Vol. 13 No. 5.
[5]	Akintola,. S. A., and. Isehunwa S. O, (2015): Temperature and Time-Dependent Behaviour of a Water Base Mud Treated with Maize (Zea mays) and Cassava (Manihot esculanta) Starches. Journal of Scientific Research and Reports. 5 (7), pp. 591-59.
[6]	Subrata Gogoi and Prasenjit Talukdar (2015): Effect and Optimization of Bactericide to control Biodegradation in non damaging drilling fluid (NDDF): International Journal of Scientific Research 6 (10): 6788-6794.
[7]	Amel Habeeb Assi (2018): Potato Starch for Enhancing the Properties of the Drilling Fluids Iraqi Journal of Chemical and Petroleum. Engineering Vol. 19 No. 3 33–40.
[8]	Khalil, M. I., Hashem, A. and Hebeish, A. 1990. Carboxymethylation of maize starch. Starch/Starke 42 (2): 60-63.
[9]	Thewlis, B. H. (1969). Starke, 21, 21.
[10]	Kuniak, L., Kodet, J., Nevydal, J., Frimm, R. and Zemek, J. (1985). Czech CS, 219, 107.
[11]	Szathmary, E., Petery, I. and Land, B. (1970). Hung Teljes, 7-08.
[12]	Sloan, J. W., Mehltretter, C. I. and Senti, R. F. (1962). Carboxymethyl high amylose starch. Journal of Chemical Engineering Data 7 (1): 156-158.
[13]	Sanir, J. D. and Bochow, K. (1983). Ger. (east), DD 158, 403
[14]	Yamauchi, T., and Sasaki, M. (1992). Method for production of a corn milling residue carboxymethyl ether salt, United States Patent, 5166336.
[15]	Shinde V. V., (2005). Production Kinetics and Functional Properties of Carboxymethyl.
[16]	Minaev, K M, Martynova, D O., Zakharov, A S, Sagitov, R R, Ber, A A and Ulyanova, O S (2016): Synthesis of Carboxymethyl Starch for increasing drilling mud quality in drilling oil and gas wells, IOP Conference Series: Earth and Environmental Science, 10.1088/1755-1315/43/1/012071, 43, (012071).
[17]	Aliyu Adebayo Sulaimon, Sarah Abidemi Akintola, Mohd Adam Bin Mohd Johari and Sunday Oloruntoba Isehunwa (2020): Evaluation of drilling muds enhanced with modified starch for HPHT well applications. Journal of Petroleum Exploration and Production Technology.
[18]	API 13A, Specification for Drilling Fluids – Specifications and Testing. API Specification 13A, 18th Edition., 2010.

Cite This Article

Plain Text BibTeX RIS

APA Style

Akintola Abidemi Sarah, Arigbe Titi Ebidiseghabofa. (2021). Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. American Journal of Mechanical and Materials Engineering, 5(1), 18-22. https://doi.org/10.11648/j.ajmme.20210501.14

Copy | Download

ACS Style

Akintola Abidemi Sarah; Arigbe Titi Ebidiseghabofa. Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. Am. J. Mech. Mater. Eng. 2021, 5(1), 18-22. doi: 10.11648/j.ajmme.20210501.14

Copy | Download

AMA Style

Akintola Abidemi Sarah, Arigbe Titi Ebidiseghabofa. Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. Am J Mech Mater Eng. 2021;5(1):18-22. doi: 10.11648/j.ajmme.20210501.14

Copy | Download

@article{10.11648/j.ajmme.20210501.14,
  author = {Akintola Abidemi Sarah and Arigbe Titi Ebidiseghabofa},
  title = {Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud},
  journal = {American Journal of Mechanical and Materials Engineering},
  volume = {5},
  number = {1},
  pages = {18-22},
  doi = {10.11648/j.ajmme.20210501.14},
  url = {https://doi.org/10.11648/j.ajmme.20210501.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmme.20210501.14},
  abstract = {It is important to understand the properties influencing the efficiency of a drilling fluid while drilling for oil and gas. As a result, drilling fluid must be designed in order to comply with three important requirements which are easy to use, cost effective and being environmentally friendly. Several studies have been carried out on the use of local materials as suitable substitute for imported additives. This study focuses on the use of starch processed from local cassava (Manihot esculenta Crant), (TME 419) using the process of wet milling and dried using three different methods namely: oven drying, direct heating and sun drying Due to this short coming resulting from the use of native starch, the starch was chemically modified using the process of esterification before being used as additive for treatment of the water-based drilling. The mud samples were prepared using Wyoming bentonite and distil water as the base fluid. Varying concentration of additives (0.5, 1.0 and 1.5 g) were added to the different mud samples and the laboratory test carried out in accordance with the API Recommended Practice 13B at varying temperatures (30, 50.70 and 90°C). The various mud samples rheological properties was determined using a Fann35A rheometer and the filtration properties using a low –Temperature and High –Pressure API Filter Press at 100 psi with a 3.5” filter paper. The mud samples labelled labeled A, B and C were treated with oven dry, direct heat and sundry modified starches, respectively. While two control mud samples were prepared using low viscous Carboxymethyl cellulose for mud sample D and extra high viscous CMC in sample E. Although the Viscosity and fluid loss profiles result of the mud samples comparable performance with that of the commercial CMC’s. However, mud samples treated with oven dried starches presented the best results in their rheological as well as fluid loss properties},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud
AU  - Akintola Abidemi Sarah
AU  - Arigbe Titi Ebidiseghabofa
Y1  - 2021/03/17
PY  - 2021
N1  - https://doi.org/10.11648/j.ajmme.20210501.14
DO  - 10.11648/j.ajmme.20210501.14
T2  - American Journal of Mechanical and Materials Engineering
JF  - American Journal of Mechanical and Materials Engineering
JO  - American Journal of Mechanical and Materials Engineering
SP  - 18
EP  - 22
PB  - Science Publishing Group
SN  - 2639-9652
UR  - https://doi.org/10.11648/j.ajmme.20210501.14
AB  - It is important to understand the properties influencing the efficiency of a drilling fluid while drilling for oil and gas. As a result, drilling fluid must be designed in order to comply with three important requirements which are easy to use, cost effective and being environmentally friendly. Several studies have been carried out on the use of local materials as suitable substitute for imported additives. This study focuses on the use of starch processed from local cassava (Manihot esculenta Crant), (TME 419) using the process of wet milling and dried using three different methods namely: oven drying, direct heating and sun drying Due to this short coming resulting from the use of native starch, the starch was chemically modified using the process of esterification before being used as additive for treatment of the water-based drilling. The mud samples were prepared using Wyoming bentonite and distil water as the base fluid. Varying concentration of additives (0.5, 1.0 and 1.5 g) were added to the different mud samples and the laboratory test carried out in accordance with the API Recommended Practice 13B at varying temperatures (30, 50.70 and 90°C). The various mud samples rheological properties was determined using a Fann35A rheometer and the filtration properties using a low –Temperature and High –Pressure API Filter Press at 100 psi with a 3.5” filter paper. The mud samples labelled labeled A, B and C were treated with oven dry, direct heat and sundry modified starches, respectively. While two control mud samples were prepared using low viscous Carboxymethyl cellulose for mud sample D and extra high viscous CMC in sample E. Although the Viscosity and fluid loss profiles result of the mud samples comparable performance with that of the commercial CMC’s. However, mud samples treated with oven dried starches presented the best results in their rheological as well as fluid loss properties
VL  - 5
IS  - 1
ER  -

Copy | Download

Author Information

Akintola Abidemi Sarah

Department of Petroleum Engineering, University of Ibadan, Ibadan, Nigeria
Arigbe Titi Ebidiseghabofa

Department of Petroleum Engineering, University of Ibadan, Ibadan, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Akintola Abidemi Sarah, Arigbe Titi Ebidiseghabofa. (2021). Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. American Journal of Mechanical and Materials Engineering, 5(1), 18-22. https://doi.org/10.11648/j.ajmme.20210501.14

Copy | Download

ACS Style

Akintola Abidemi Sarah; Arigbe Titi Ebidiseghabofa. Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. Am. J. Mech. Mater. Eng. 2021, 5(1), 18-22. doi: 10.11648/j.ajmme.20210501.14

Copy | Download

AMA Style

Akintola Abidemi Sarah, Arigbe Titi Ebidiseghabofa. Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud. Am J Mech Mater Eng. 2021;5(1):18-22. doi: 10.11648/j.ajmme.20210501.14

Copy | Download

@article{10.11648/j.ajmme.20210501.14,
  author = {Akintola Abidemi Sarah and Arigbe Titi Ebidiseghabofa},
  title = {Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud},
  journal = {American Journal of Mechanical and Materials Engineering},
  volume = {5},
  number = {1},
  pages = {18-22},
  doi = {10.11648/j.ajmme.20210501.14},
  url = {https://doi.org/10.11648/j.ajmme.20210501.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmme.20210501.14},
  abstract = {It is important to understand the properties influencing the efficiency of a drilling fluid while drilling for oil and gas. As a result, drilling fluid must be designed in order to comply with three important requirements which are easy to use, cost effective and being environmentally friendly. Several studies have been carried out on the use of local materials as suitable substitute for imported additives. This study focuses on the use of starch processed from local cassava (Manihot esculenta Crant), (TME 419) using the process of wet milling and dried using three different methods namely: oven drying, direct heating and sun drying Due to this short coming resulting from the use of native starch, the starch was chemically modified using the process of esterification before being used as additive for treatment of the water-based drilling. The mud samples were prepared using Wyoming bentonite and distil water as the base fluid. Varying concentration of additives (0.5, 1.0 and 1.5 g) were added to the different mud samples and the laboratory test carried out in accordance with the API Recommended Practice 13B at varying temperatures (30, 50.70 and 90°C). The various mud samples rheological properties was determined using a Fann35A rheometer and the filtration properties using a low –Temperature and High –Pressure API Filter Press at 100 psi with a 3.5” filter paper. The mud samples labelled labeled A, B and C were treated with oven dry, direct heat and sundry modified starches, respectively. While two control mud samples were prepared using low viscous Carboxymethyl cellulose for mud sample D and extra high viscous CMC in sample E. Although the Viscosity and fluid loss profiles result of the mud samples comparable performance with that of the commercial CMC’s. However, mud samples treated with oven dried starches presented the best results in their rheological as well as fluid loss properties},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Evaluating the Effect of Drying Methods on the Properties of a Water Base Drilling Mud
AU  - Akintola Abidemi Sarah
AU  - Arigbe Titi Ebidiseghabofa
Y1  - 2021/03/17
PY  - 2021
N1  - https://doi.org/10.11648/j.ajmme.20210501.14
DO  - 10.11648/j.ajmme.20210501.14
T2  - American Journal of Mechanical and Materials Engineering
JF  - American Journal of Mechanical and Materials Engineering
JO  - American Journal of Mechanical and Materials Engineering
SP  - 18
EP  - 22
PB  - Science Publishing Group
SN  - 2639-9652
UR  - https://doi.org/10.11648/j.ajmme.20210501.14
AB  - It is important to understand the properties influencing the efficiency of a drilling fluid while drilling for oil and gas. As a result, drilling fluid must be designed in order to comply with three important requirements which are easy to use, cost effective and being environmentally friendly. Several studies have been carried out on the use of local materials as suitable substitute for imported additives. This study focuses on the use of starch processed from local cassava (Manihot esculenta Crant), (TME 419) using the process of wet milling and dried using three different methods namely: oven drying, direct heating and sun drying Due to this short coming resulting from the use of native starch, the starch was chemically modified using the process of esterification before being used as additive for treatment of the water-based drilling. The mud samples were prepared using Wyoming bentonite and distil water as the base fluid. Varying concentration of additives (0.5, 1.0 and 1.5 g) were added to the different mud samples and the laboratory test carried out in accordance with the API Recommended Practice 13B at varying temperatures (30, 50.70 and 90°C). The various mud samples rheological properties was determined using a Fann35A rheometer and the filtration properties using a low –Temperature and High –Pressure API Filter Press at 100 psi with a 3.5” filter paper. The mud samples labelled labeled A, B and C were treated with oven dry, direct heat and sundry modified starches, respectively. While two control mud samples were prepared using low viscous Carboxymethyl cellulose for mud sample D and extra high viscous CMC in sample E. Although the Viscosity and fluid loss profiles result of the mud samples comparable performance with that of the commercial CMC’s. However, mud samples treated with oven dried starches presented the best results in their rheological as well as fluid loss properties
VL  - 5
IS  - 1
ER  -

Copy | Download