Research on Fusion Brazing Welding of Steel/Ceramic Connections

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li

doi:doi:10.11648/j.ajmme.20230703.12

| Peer-Reviewed

Research on Fusion Brazing Welding of Steel/Ceramic Connections

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li

Published in American Journal of Mechanical and Materials Engineering (Volume 7, Issue 3)

Received: 17 July 2023 Accepted: 10 August 2023 Published: 22 August 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Ceramic/metal joints combine the high wear resistance of ceramics with the good ductility of metals to meet the conditions of use in harsh environments, avoiding the drawbacks of individual materials, and are used in a wide range of mechanical and heavy engineering applications such as aerospace, military instrumentation and nuclear energy. Due to the large difference between the density, specific heat capacity and coefficient of thermal expansion of ceramics and metals and other thermophysical properties, the residual thermal stresses generated during the connection will cause damage to the joints, which makes it difficult to realize the connection between ceramics and metals. Fusion brazing can alleviate the defects caused by the differences in thermophysical properties, and is an important method for the preparation of ceramic/metal composites. A molten liquid metal is used to wet the ceramic/metal surface and undergo a metallurgical reaction. Brazed connections are made at low temperatures, the base material does not melt during the brazing process, and there is minimal effect on the structure and properties of the base material. Therefore, hard brazing has been the main method of joining different materials for many years. This paper reviews the application of melt brazing in ceramic/metal joints in recent years and analyzes the structure, mechanical properties and constituent parts of the ceramic/metal interface.

Published in	American Journal of Mechanical and Materials Engineering (Volume 7, Issue 3)
DOI	10.11648/j.ajmme.20230703.12
Page(s)	27-30
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Fusion Brazing, Thermal Expansion, Ceramic/Metal Joints, Interface

References

[1]	Atabaki M M. Recent progress in joining of ceramic powder metallurgy products to metals [J]. Metalurgija Sisak Then Zagreb, 2010, 16 (4): 255-268.
[2]	Donald I W, Mallinson P M, Metcalfe B L, et al. Recent developments in the preparation, characterization and applications of glass-and glass–ceramic-to-metal seals and coatings [J]. Journal of Materials Science, 2011, 46: 1975-2000.
[3]	Zhang Y, Chen Y K, Yu D S, et al. A review paper on effect of the welding process of ceramics and metals [J]. Journal of Materials Research and Technology, 2020, 9 (6): 16214-16236.
[4]	Hausner S, Wielage B. Brazing of metal and ceramic joints [M]. Advances in Brazing. Woodhead Publishing, 2013: 361-393.
[5]	Zhang Y, Feng D, He Z, et al. Progress in joining ceramics to metals [J]. Journal of Iron and Steel Research International, 2006, 13 (2): 1-5.
[6]	Yanping Peng. Heat-Resisting Constructional ceramics and Composite, and their Application in Aero-Engine [J]. International Aviation, 1999, 000 (001): 61-62. (in Chinese).
[7]	Jubin Gao, Yangwei Wang, Lingyu Zhang, et al. Study on the Ballistic Performance of Ceramic Composite Armor with Different Adhesive [J]. Advanced Materials Research, 2010, 139-141: 308-313.
[8]	Rajiv Asthana, Mrityunjay Singh, Natalia Sobczak. The Role of Wetting and Reactivity in Infiltration of Ceramic-Metal Composites [J]. Advances in Ceramic Coatings and Ceramic-Metal Systems: Ceramic Engineering and Science Proceedings, 2005, 26: 248-261.
[9]	Wang Y, Liu G, Fan Z. Microstructural evolution of rheodiecast AZ91D magnesium alloy during heat treatment [J]. Acta Materialia, 2006, 54: 689-699.
[10]	S. Hausner, B. Wielage. Brazing of metal and ceramic joints [M]. Advances in Brazing. Woodhead Publishing, 2013: 361-393.
[11]	Zhang Y, Chen Y K, Zhou J P, et al. Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material [J]. Metallurgical Research & Technology, 2021, 118 (1): 104.
[12]	Hadji Y, Haddad A, Yahi M, et al. Joining Ti3SiC2 MAX phase with 308 stainless steel and aluminum fillers by tungsten inert gas (TIG)-brazing process [J]. Ceramics International, 2016, 42 (1): 1026-1035.
[13]	Rohde M, Südmeyer I, Urbanek A, et al. Joining of alumina and steel by a laser supported brazing process [J]. Ceramics International, 2009, 35 (1): 333-337.
[14]	Zhang Y, Chen Y K, Yu D S, et al. A method for producing ceramic/stainless steel composites by laser welding with calculation optimisation [J]. Materials Science and Technology, 2023, 39 (2): 147-157.
[15]	Guo Z, Zhang Y, Lu W, et al. Laser welding of ZrO2 ceramic and 304 stainless steel with Ag–Cu–Ti filler [J]. Materials Science and Technology, 2023: 1-11.
[16]	C. A. Walker, V. C. Hodges. Comparison of metal-ceramic brazing methods [J]. Proposed for Publication in Welding Journal, 2008.
[17]	Limei Pan, Jian Gu, Wenjie Zou, et al. Brazing joining of Ti3AlC2 ceramic and 40Cr steel based on Ag-Cu-Ti filler metal [J]. Journal of Materials Processing Technology, 2018, 251: 181-187.
[18]	Jinhui Xiong, Jihua Huang, Hua Zhang, et al. Brazing of carbon fiber reinforced SiC composite and TC4 using Ag-Cu-Ti active brazing alloy [J]. Materials Science and Engineering: A, 2010, 527 (4-5): 1096-1101.
[19]	Ying Wang, Zhengwen Yang, Lixia Zhang, et al. Microstructure and Mechanical Properties of Invar Alloy and Si3N4 Ceramic Brazed Joints [J]. Rare Metal Materials and Engineering, 2015, 044 (2): 339-343. (in Chinese).
[20]	Yanhu Pei, Hong Li, Haixin Huang. Microstructure and properties of ZrO2 ceramic and TC4 vacuum brazing joint [J]. Welding & Joining, 2016, 000 (006): 22-25. (in Chinese).

Cite This Article

Plain Text BibTeX RIS

APA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Fusion Brazing Welding of Steel/Ceramic Connections. American Journal of Mechanical and Materials Engineering, 7(3), 27-30. https://doi.org/10.11648/j.ajmme.20230703.12

Copy | Download

ACS Style

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Fusion Brazing Welding of Steel/Ceramic Connections. Am. J. Mech. Mater. Eng. 2023, 7(3), 27-30. doi: 10.11648/j.ajmme.20230703.12

Copy | Download

AMA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Fusion Brazing Welding of Steel/Ceramic Connections. Am J Mech Mater Eng. 2023;7(3):27-30. doi: 10.11648/j.ajmme.20230703.12

Copy | Download

@article{10.11648/j.ajmme.20230703.12,
  author = {Deshui Yu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Fusion Brazing Welding of Steel/Ceramic Connections},
  journal = {American Journal of Mechanical and Materials Engineering},
  volume = {7},
  number = {3},
  pages = {27-30},
  doi = {10.11648/j.ajmme.20230703.12},
  url = {https://doi.org/10.11648/j.ajmme.20230703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmme.20230703.12},
  abstract = {Ceramic/metal joints combine the high wear resistance of ceramics with the good ductility of metals to meet the conditions of use in harsh environments, avoiding the drawbacks of individual materials, and are used in a wide range of mechanical and heavy engineering applications such as aerospace, military instrumentation and nuclear energy. Due to the large difference between the density, specific heat capacity and coefficient of thermal expansion of ceramics and metals and other thermophysical properties, the residual thermal stresses generated during the connection will cause damage to the joints, which makes it difficult to realize the connection between ceramics and metals. Fusion brazing can alleviate the defects caused by the differences in thermophysical properties, and is an important method for the preparation of ceramic/metal composites. A molten liquid metal is used to wet the ceramic/metal surface and undergo a metallurgical reaction. Brazed connections are made at low temperatures, the base material does not melt during the brazing process, and there is minimal effect on the structure and properties of the base material. Therefore, hard brazing has been the main method of joining different materials for many years. This paper reviews the application of melt brazing in ceramic/metal joints in recent years and analyzes the structure, mechanical properties and constituent parts of the ceramic/metal interface.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Fusion Brazing Welding of Steel/Ceramic Connections
AU  - Deshui Yu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ajmme.20230703.12
DO  - 10.11648/j.ajmme.20230703.12
T2  - American Journal of Mechanical and Materials Engineering
JF  - American Journal of Mechanical and Materials Engineering
JO  - American Journal of Mechanical and Materials Engineering
SP  - 27
EP  - 30
PB  - Science Publishing Group
SN  - 2639-9652
UR  - https://doi.org/10.11648/j.ajmme.20230703.12
AB  - Ceramic/metal joints combine the high wear resistance of ceramics with the good ductility of metals to meet the conditions of use in harsh environments, avoiding the drawbacks of individual materials, and are used in a wide range of mechanical and heavy engineering applications such as aerospace, military instrumentation and nuclear energy. Due to the large difference between the density, specific heat capacity and coefficient of thermal expansion of ceramics and metals and other thermophysical properties, the residual thermal stresses generated during the connection will cause damage to the joints, which makes it difficult to realize the connection between ceramics and metals. Fusion brazing can alleviate the defects caused by the differences in thermophysical properties, and is an important method for the preparation of ceramic/metal composites. A molten liquid metal is used to wet the ceramic/metal surface and undergo a metallurgical reaction. Brazed connections are made at low temperatures, the base material does not melt during the brazing process, and there is minimal effect on the structure and properties of the base material. Therefore, hard brazing has been the main method of joining different materials for many years. This paper reviews the application of melt brazing in ceramic/metal joints in recent years and analyzes the structure, mechanical properties and constituent parts of the ceramic/metal interface.
VL  - 7
IS  - 3
ER  -

Copy | Download

Author Information

Deshui Yu

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Yan Zhang

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Jianping Zhou

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Daqian Sun

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China
Hongmei Li

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Fusion Brazing Welding of Steel/Ceramic Connections. American Journal of Mechanical and Materials Engineering, 7(3), 27-30. https://doi.org/10.11648/j.ajmme.20230703.12

Copy | Download

ACS Style

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Fusion Brazing Welding of Steel/Ceramic Connections. Am. J. Mech. Mater. Eng. 2023, 7(3), 27-30. doi: 10.11648/j.ajmme.20230703.12

Copy | Download

AMA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Fusion Brazing Welding of Steel/Ceramic Connections. Am J Mech Mater Eng. 2023;7(3):27-30. doi: 10.11648/j.ajmme.20230703.12

Copy | Download

@article{10.11648/j.ajmme.20230703.12,
  author = {Deshui Yu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Fusion Brazing Welding of Steel/Ceramic Connections},
  journal = {American Journal of Mechanical and Materials Engineering},
  volume = {7},
  number = {3},
  pages = {27-30},
  doi = {10.11648/j.ajmme.20230703.12},
  url = {https://doi.org/10.11648/j.ajmme.20230703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmme.20230703.12},
  abstract = {Ceramic/metal joints combine the high wear resistance of ceramics with the good ductility of metals to meet the conditions of use in harsh environments, avoiding the drawbacks of individual materials, and are used in a wide range of mechanical and heavy engineering applications such as aerospace, military instrumentation and nuclear energy. Due to the large difference between the density, specific heat capacity and coefficient of thermal expansion of ceramics and metals and other thermophysical properties, the residual thermal stresses generated during the connection will cause damage to the joints, which makes it difficult to realize the connection between ceramics and metals. Fusion brazing can alleviate the defects caused by the differences in thermophysical properties, and is an important method for the preparation of ceramic/metal composites. A molten liquid metal is used to wet the ceramic/metal surface and undergo a metallurgical reaction. Brazed connections are made at low temperatures, the base material does not melt during the brazing process, and there is minimal effect on the structure and properties of the base material. Therefore, hard brazing has been the main method of joining different materials for many years. This paper reviews the application of melt brazing in ceramic/metal joints in recent years and analyzes the structure, mechanical properties and constituent parts of the ceramic/metal interface.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Fusion Brazing Welding of Steel/Ceramic Connections
AU  - Deshui Yu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ajmme.20230703.12
DO  - 10.11648/j.ajmme.20230703.12
T2  - American Journal of Mechanical and Materials Engineering
JF  - American Journal of Mechanical and Materials Engineering
JO  - American Journal of Mechanical and Materials Engineering
SP  - 27
EP  - 30
PB  - Science Publishing Group
SN  - 2639-9652
UR  - https://doi.org/10.11648/j.ajmme.20230703.12
AB  - Ceramic/metal joints combine the high wear resistance of ceramics with the good ductility of metals to meet the conditions of use in harsh environments, avoiding the drawbacks of individual materials, and are used in a wide range of mechanical and heavy engineering applications such as aerospace, military instrumentation and nuclear energy. Due to the large difference between the density, specific heat capacity and coefficient of thermal expansion of ceramics and metals and other thermophysical properties, the residual thermal stresses generated during the connection will cause damage to the joints, which makes it difficult to realize the connection between ceramics and metals. Fusion brazing can alleviate the defects caused by the differences in thermophysical properties, and is an important method for the preparation of ceramic/metal composites. A molten liquid metal is used to wet the ceramic/metal surface and undergo a metallurgical reaction. Brazed connections are made at low temperatures, the base material does not melt during the brazing process, and there is minimal effect on the structure and properties of the base material. Therefore, hard brazing has been the main method of joining different materials for many years. This paper reviews the application of melt brazing in ceramic/metal joints in recent years and analyzes the structure, mechanical properties and constituent parts of the ceramic/metal interface.
VL  - 7
IS  - 3
ER  -

Copy | Download