CaCu3Ti4O12 (CCTO) is a novel material with high relative dielectric constant and low loss tangent, CCTO belongs to a family of oxides of the type ACu3Ti4O12 (A=Ca, Cd, Sr, Na, Th). CaCu3Ti4O12 was first reported by Subramanian et al., to have an unusually high dielectric constant (~10,000) at 1 kHz. It is well known that dielectric properties of CCTO are strongly dependent upon the processing conditions as well as on doping. Semi-wet route was used to synthesise samples of CaCu3Ti4O12 and Ca(1-3x/2)LaxCu3Ti4O12 (x=0.01). Analytical grade chemicals, Ca(NO3)2.4H2O, La(NO3)3.6H2O, Cu(NO3)2.3H2O, titanium dioxide and citric acid having purity better than 99.95% were used as starting materials. The formation of single-phase solid solutions was confirmed by the absence characteristic lines of constituent’s oxides in the XRD patterns. Dielectric measurement of undoped and La doped CCTO has been performed using four probe novocontrol set up (ZG4) in a wide range of temperature starting from the room temperature. With La doping in CCTO there is an increase in the value of dielectric constant in comparison to undoped CCTO.
Published in | American Journal of Materials Synthesis and Processing (Volume 2, Issue 6) |
DOI | 10.11648/j.ajmsp.20170206.13 |
Page(s) | 90-93 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2017. Published by Science Publishing Group |
CaCu3Ti4O12, XRD, Dielectric Constant, Dielectric Loss
[1] | M. A. Subramanian, L. Dong, N. Duan, B. A. Reisner, A. W. Sleight, J. Solid State Chem. 151 (2000) 323. |
[2] | Ramirez AP, Subramanian MA, et al. Solid State Commun 2000; 115:217. |
[3] | Deschanvres A, Raveau B. Tollemer Bull Chim Soc Fr 1967:4077. |
[4] | Julie Mohamed J, Hutagalung SD, et al. Mater Lett 2007; 61:1835. |
[5] | Shao SF, Zhang JL, Zheng P, Wang CL. Solid State Commun 2007; 142:281. |
[6] | Kwona S, Huanga CC, Subramanian MA, et al. J Alloys Compd 2009; 473:433. |
[7] | Wanga CM, Kaob KS, et al. J Phys Chem Solids 2008; 69:608. |
[8] | Jha P, Arora P, Ganguli AK, et al. Mater Lett 2002; 4179:1. |
[9] | D. C. Sinclair, T. B. Adams, F. D. Morrison, A. R. West, Appl. Phys. Lett. 80 (2002) 2153. |
[10] | T. B. Adams, D. C. Sinclair, A. R. West, Adv. Mater. 14 (2002) 1321. |
[11] | S. Y. Chung, I. D. Kim, S. J. L. Kang, Nature 3 (2004) 774. |
[12] | J. Li, A. W. Sleight, M. A. Subramanian, Solid State Commun. 135 (2005) 260. |
[13] | L. Wu, Y. Zhu, S. Park, S. Shapiro, G. Shirane, J. Tafto, Phys. Rev. B 71 (2005) 014118. |
[14] | M.-H. Whangbo, M. A. Subramanian, Chem. Mater. 18 (2006) 3257. |
[15] | T. T. Fang, C. P. Liu, Chem. Mater. 17 (2005) 5167. |
[16] | P. Lunkenheimer, V. Bobnar, A. V. Pronin, A. I. Ritus, A. A. Volkov, A. Loidl, Phys. Rev. B 66 (2002) 052105. |
[17] | P. Lunkenheimer, R. Fichtl, S. G. Ebbinghaus, A. Loidl, Phys. Rev. B 70 (2004) 172102. |
[18] | A Srivastava, P Maiti, D Kumar, O Parkash. Composites Science and Technology 93 (2014) 83–89. |
[19] | M. A. Subramanian, L. Dong, N. Duran, B. A. Resiner, A. W. Sleight, J. Solid State Chem. 151 (2000) 323–325. |
[20] | C. K Chiang., K. Y. Yin, F. S. Yen, C. Y. Hwang, Jl. Mater. Sci, 36, 3809-3815, 2001. |
[21] | A Srivastava, K K Jana, P Maiti, D Kumar and O Parkash. Material Research Bulletin. 70 (2015) 735-742. |
[22] | C H Kim., K S Oh., Y K Paek., Journal of the Korean Ceramic Society, Vol. 50, No. 1, pp. 87~91, 2013. |
[23] | T. T. Fang, H. K. Shiau, J. Am. Ceram. Soc. 87 (2004) 2072. |
APA Style
Anshuman Srivastava, Om Parkash, Devendra Kumar, Pralay Maiti. (2017). Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12 for Capacitor Application. American Journal of Materials Synthesis and Processing, 2(6), 90-93. https://doi.org/10.11648/j.ajmsp.20170206.13
ACS Style
Anshuman Srivastava; Om Parkash; Devendra Kumar; Pralay Maiti. Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12 for Capacitor Application. Am. J. Mater. Synth. Process. 2017, 2(6), 90-93. doi: 10.11648/j.ajmsp.20170206.13
AMA Style
Anshuman Srivastava, Om Parkash, Devendra Kumar, Pralay Maiti. Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12 for Capacitor Application. Am J Mater Synth Process. 2017;2(6):90-93. doi: 10.11648/j.ajmsp.20170206.13
@article{10.11648/j.ajmsp.20170206.13, author = {Anshuman Srivastava and Om Parkash and Devendra Kumar and Pralay Maiti}, title = {Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12 for Capacitor Application}, journal = {American Journal of Materials Synthesis and Processing}, volume = {2}, number = {6}, pages = {90-93}, doi = {10.11648/j.ajmsp.20170206.13}, url = {https://doi.org/10.11648/j.ajmsp.20170206.13}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmsp.20170206.13}, abstract = {CaCu3Ti4O12 (CCTO) is a novel material with high relative dielectric constant and low loss tangent, CCTO belongs to a family of oxides of the type ACu3Ti4O12 (A=Ca, Cd, Sr, Na, Th). CaCu3Ti4O12 was first reported by Subramanian et al., to have an unusually high dielectric constant (~10,000) at 1 kHz. It is well known that dielectric properties of CCTO are strongly dependent upon the processing conditions as well as on doping. Semi-wet route was used to synthesise samples of CaCu3Ti4O12 and Ca(1-3x/2)LaxCu3Ti4O12 (x=0.01). Analytical grade chemicals, Ca(NO3)2.4H2O, La(NO3)3.6H2O, Cu(NO3)2.3H2O, titanium dioxide and citric acid having purity better than 99.95% were used as starting materials. The formation of single-phase solid solutions was confirmed by the absence characteristic lines of constituent’s oxides in the XRD patterns. Dielectric measurement of undoped and La doped CCTO has been performed using four probe novocontrol set up (ZG4) in a wide range of temperature starting from the room temperature. With La doping in CCTO there is an increase in the value of dielectric constant in comparison to undoped CCTO.}, year = {2017} }
TY - JOUR T1 - Structural and Dielectric Properties of Lanthanum Doped CaCu3Ti4O12 for Capacitor Application AU - Anshuman Srivastava AU - Om Parkash AU - Devendra Kumar AU - Pralay Maiti Y1 - 2017/11/15 PY - 2017 N1 - https://doi.org/10.11648/j.ajmsp.20170206.13 DO - 10.11648/j.ajmsp.20170206.13 T2 - American Journal of Materials Synthesis and Processing JF - American Journal of Materials Synthesis and Processing JO - American Journal of Materials Synthesis and Processing SP - 90 EP - 93 PB - Science Publishing Group SN - 2575-1530 UR - https://doi.org/10.11648/j.ajmsp.20170206.13 AB - CaCu3Ti4O12 (CCTO) is a novel material with high relative dielectric constant and low loss tangent, CCTO belongs to a family of oxides of the type ACu3Ti4O12 (A=Ca, Cd, Sr, Na, Th). CaCu3Ti4O12 was first reported by Subramanian et al., to have an unusually high dielectric constant (~10,000) at 1 kHz. It is well known that dielectric properties of CCTO are strongly dependent upon the processing conditions as well as on doping. Semi-wet route was used to synthesise samples of CaCu3Ti4O12 and Ca(1-3x/2)LaxCu3Ti4O12 (x=0.01). Analytical grade chemicals, Ca(NO3)2.4H2O, La(NO3)3.6H2O, Cu(NO3)2.3H2O, titanium dioxide and citric acid having purity better than 99.95% were used as starting materials. The formation of single-phase solid solutions was confirmed by the absence characteristic lines of constituent’s oxides in the XRD patterns. Dielectric measurement of undoped and La doped CCTO has been performed using four probe novocontrol set up (ZG4) in a wide range of temperature starting from the room temperature. With La doping in CCTO there is an increase in the value of dielectric constant in comparison to undoped CCTO. VL - 2 IS - 6 ER -