In this study, biodegradable cassava starch/poly (vinyl alcohol) (PVA) trays with and without poly (lactic acid) (PLA) coating were evaluated as possible substitutes for expanded poly (styrene) (EPS) trays in strawberry packaging. The parameters evaluated were physical and chemical parameters of pH, soluble solids and titratable acidity for strawberries, strawberry and trays moisture content and the mass loss of the systems. In addition, the amount of molds and yeasts was determined in both strawberries and trays. None of the trays used in this study caused changes in the physical and chemical parameters of the strawberries. The molds and yeasts growth was higher in the strawberries packed in EPS compared with the other packaging. The trays with PLA coating and the EPS trays had statistically equal mass loss. The PLA coating applied on cassava starch-based trays was efficient as moisture absorption barrier.
Published in | American Journal of Polymer Science and Technology (Volume 3, Issue 4) |
DOI | 10.11648/j.ajpst.20170304.14 |
Page(s) | 76-81 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2017. Published by Science Publishing Group |
Cassava Starch, Biodegradable Packaging, Trays
[1] | V. Siracusa, P. Rocculi, S. Romani, and M. D. Rosa, “Biodegradable Polymers for food packaging: a review”, Trends Food Science and Technology, vol. 19, pp. 634–643, 2008. |
[2] | F. Debiagi, R. K. T. Kobayashi, G. Nakazato, L. A. Panagio and S. Mali, “Biodegradable active packaging based on cassava bagasse, polyninyl alcohol and essential oil”, Industrial Crops and Products, vol. 52, pp. 664–670, 2014. |
[3] | L. G. Carr, D. F. Parra, P. Ponce, A. B. Lugão and P. M. Buchler, “Influence of Fibers on the Mechanical Properties of Cassava Starch Foams”, Journal of Polymers and the Environment, vol. 14, pp. 179–183, 2006. |
[4] | P. R. Salgado, V. C. Schmidt, S. E. M. Ortiz, A. N. Mauri and J. B. Laurindo, “Biodegradable foams based on cassava starch, sunflower protein and cellulose fibers obtained by baking process”, Journal of Food Engineering, vol. 85, pp. 435-443, 2008. |
[5] | Z. Abbasi, “Water resistence, weight loss and enzymatic degradation of blends starch/polyvinyl alcohol containing SiO2 nanoparticle”, Journal of Taiwan Institute of Chemical Engineers, vol. 43, pp. 264–268, 2012. |
[6] | S. H. Clasen, C. M. O. Müller and A. T. N. Pires, “Maleic Anhydride as a Compatibilizer and Plasticizer in TPS/PLA Blends”, Journal of the Brazilian Chemical Society, vol. 26, pp. 1583–1590, 2014. |
[7] | F. Debiagi, B. M. Marim and S. Mali, “Properties of Cassava Bagasse and Polyvinyl Alcohol Biodegradable Foams”, Journal of Polymers and the Environment, vol. 23, pp. 269–276, 2015. |
[8] | A. E. S. Vercelheze, F. M. Fakhouri, L. H. Dall’Antônia, A. Urbano, E. Y. Youssef, F. Yamashita and S. Mali, “Properties of baked foams based on cassava starch, sugarcane bagasse fibers ans montmorillonite” Carbohydrate Polymers, vol. 87, pp. 1302 – 1310, 2012. |
[9] | F. C. Soares, F. Yamashita, C. M. O. Müller and A. T. N. Pires, “Thermoplastic starch/poly(lactic acid) sheets coated with cross-linked chitosan”, Polymer Testing, vol. 32, pp. 94 – 98, 2013. |
[10] | J. Rhim, J. Lee, and S. Hong, “Increase in Water Resistance of Paperboard by coating with Poly(lactide)”, Packaging Technology and Science, vol. 20, pp. 393 – 402, 2007. |
[11] | K. Khwaldia, E. Arab-Tehrany, S. Desobry, “Biopolymer coatings on paper packaging materials”, Food Science and Food, vol. 9, pp. 82-91, 2010. |
[12] | F. Debiagi, S. Mali, M. V. E. Grossmann and F. Yamashita, “Biodegradable foams based on starch, polyvinyl alcohol, chitosan and sugarcane fibers obtained by extrusion”, Brazilian Archives of Biology and Technology, vol. 54, pp. 1043–1052, 2011. |
[13] | L. R. P. F. Mello and S. Mali, “Use of malt bagasse to produce biodegradable baked foams made from cassava starch”, Industrial Crops and Products, vol. 55, pp. 187–193, 2014. |
[14] | F. Stoffel, L. Piemilini-Barreto, M. Zeni, “Preparation of cassava starch-based trays with glycerol, sorbitol and poly (vinyl alcohol): properties and influence for use as food packaging”, Research & Reviews: Journal of Food Science and Technology, vol. 4, pp. 1 8, 2015. |
[15] | V. C. R. Schmidt and J. B. Laurindo, “Characterization of Foams Obtained from Cassava Starch, Cellulose Fibres and Dolomitic Limestone by a Thermopressing Process”, Brazilian Archives of Biology and Technology, vol. 53, pp. 185–192, 2010. |
[16] | AOAC, Association of Official Analytical Chemists, Official Methods of Analysis, Washington D., 1998. |
[17] | E. M. C. Alexandre, T. R. S. Brandão and C. L. M. Silva, “Efficacy of non-thermal Technologies and sanitizer on microbial load reduction and quality retention of strawberries”, Journal of Food Engineering, vol. 108, pp. 417–426, 2012. |
[18] | F. M. Fakhouri and C. Grosso, “Effect of Edible Coatings on the Shelf Life of in natura Guava (Psidium guajava L.) Stored Under Refrigeration”, Brazilian Journal of Food Technology, vol. 6, pp. 203-211, 2003. |
[19] | J. De Bruijn and R. Bórquez, “Quality retention in strawberries dried by emerging dehydration methods”, Food Research International, vol. 63, pp. 42–18, 2014. |
[20] | I. V. M. D. Moares, S. A. Cenci, B. C. Benedetti, A. M. G. N. Mamede, A. G. Soares, and H. T. G. Barboza, “Physical and Chemical characteristics of minimally processed strawberries stored under refrigeration and controled atmospheres”, Food Science and Technology, vol. 28, pp. 274-281, 2008. |
[21] | E. Velickova, E. Winkelhausen, S. Kuzmanova, V. D. Alvez, and M. Moldão-Martins, “Impact of chitosan-besswax edible coating on the quality of fresh strawberries (Fragaria ananassa cv Camarosa) under commercial storage conditions”, LWT - Food Science and Technology, vol. 52, pp. 80–92, 2013. |
[22] | J. T. V. Resende, R. G. F. Morales, M. V. Faria, A. L. L. Rissini, L. K. P. Camargo and C. K. Camargo, “Produtividade e teor de sólidos solúveis de frutos de cultivares de morangueiro em ambiente protegido”, Horticultura Brasileira, vol. 28, pp. 185–189, 2010. |
[23] | M. S. Aday and C. Caner, “The shelf life extension of fresh strawberries using a oxygen absorber in the biobased package”, LWT - Food Science and Technology, vol. 52, pp. 102–109, 2013. |
[24] | N. B. Gol, P. R. Patel, and T. V. Ramana Rao, “Improvement of quality and shelf life of strawberries with edible coatings enriched with chitosan”, Postharvest Biology and Technology, vol. 85, pp. 185–195, 2013. |
[25] | F. Yamashita, G. F. Veiga, M. T. Benassi and S. R. Roberto, “Strawberries packaged with Polyvinyl Cloride (PVC) film”, Semina: Ciencias Agrarárias, vol. 27, pp. 429–436, 2006. |
[26] | I. L. Françoso, M. A. L. Couto, S. G. Canniatti – Brazaca and V. Arthur, “Physical-chemical alterations in irradiated and stored strawberries (Fragaria anassa Duch.)”, Food Science and Technolology, vol. 28, pp. 614–619, 2008. |
[27] | L. Qin, J. Qiu, M. Liu, S. Ding, L. Shao, S. Lü, G. Zhang, Y. Zhao, and X. Fu, “Mechanical and thermal properties of poly(lactic acid) composites with rice straw fiber modified by poly(butyl acrylate)” Chemical Engineering Journal, vol. 166, pp. 772–228, 2011. |
[28] | W. Chen, H. Hao, D. Hughes, Y. Shi, J. Cui and Z. Li, “Static and dynamic mechanical properties of expanded polystyrene”, Materials &. Design, vol. 69, pp. 170–180, 2015. |
[29] | J. B. Olivato, S. Mali and M. V. E. Grossmann, “Effect of biodegradable starch packing on storage of processed cheese”. Semina: Ciencia Agraria, vol. 27, pp. 81-88, 2006. |
APA Style
Marina Baratter, Eduarda Francine Weschenlfelder, Fernanda Stoffel, Mara Zeni, Luciani Tatsch Piemolini-Barreto. (2017). Analysis and Evaluation of Cassava Starch-Based Biodegradable Trays as an Alternative Packaging to Fresh Strawberry (Fragaria ananassa cv San Andreas). American Journal of Polymer Science and Technology, 3(4), 76-81. https://doi.org/10.11648/j.ajpst.20170304.14
ACS Style
Marina Baratter; Eduarda Francine Weschenlfelder; Fernanda Stoffel; Mara Zeni; Luciani Tatsch Piemolini-Barreto. Analysis and Evaluation of Cassava Starch-Based Biodegradable Trays as an Alternative Packaging to Fresh Strawberry (Fragaria ananassa cv San Andreas). Am. J. Polym. Sci. Technol. 2017, 3(4), 76-81. doi: 10.11648/j.ajpst.20170304.14
AMA Style
Marina Baratter, Eduarda Francine Weschenlfelder, Fernanda Stoffel, Mara Zeni, Luciani Tatsch Piemolini-Barreto. Analysis and Evaluation of Cassava Starch-Based Biodegradable Trays as an Alternative Packaging to Fresh Strawberry (Fragaria ananassa cv San Andreas). Am J Polym Sci Technol. 2017;3(4):76-81. doi: 10.11648/j.ajpst.20170304.14
@article{10.11648/j.ajpst.20170304.14, author = {Marina Baratter and Eduarda Francine Weschenlfelder and Fernanda Stoffel and Mara Zeni and Luciani Tatsch Piemolini-Barreto}, title = {Analysis and Evaluation of Cassava Starch-Based Biodegradable Trays as an Alternative Packaging to Fresh Strawberry (Fragaria ananassa cv San Andreas)}, journal = {American Journal of Polymer Science and Technology}, volume = {3}, number = {4}, pages = {76-81}, doi = {10.11648/j.ajpst.20170304.14}, url = {https://doi.org/10.11648/j.ajpst.20170304.14}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20170304.14}, abstract = {In this study, biodegradable cassava starch/poly (vinyl alcohol) (PVA) trays with and without poly (lactic acid) (PLA) coating were evaluated as possible substitutes for expanded poly (styrene) (EPS) trays in strawberry packaging. The parameters evaluated were physical and chemical parameters of pH, soluble solids and titratable acidity for strawberries, strawberry and trays moisture content and the mass loss of the systems. In addition, the amount of molds and yeasts was determined in both strawberries and trays. None of the trays used in this study caused changes in the physical and chemical parameters of the strawberries. The molds and yeasts growth was higher in the strawberries packed in EPS compared with the other packaging. The trays with PLA coating and the EPS trays had statistically equal mass loss. The PLA coating applied on cassava starch-based trays was efficient as moisture absorption barrier.}, year = {2017} }
TY - JOUR T1 - Analysis and Evaluation of Cassava Starch-Based Biodegradable Trays as an Alternative Packaging to Fresh Strawberry (Fragaria ananassa cv San Andreas) AU - Marina Baratter AU - Eduarda Francine Weschenlfelder AU - Fernanda Stoffel AU - Mara Zeni AU - Luciani Tatsch Piemolini-Barreto Y1 - 2017/07/25 PY - 2017 N1 - https://doi.org/10.11648/j.ajpst.20170304.14 DO - 10.11648/j.ajpst.20170304.14 T2 - American Journal of Polymer Science and Technology JF - American Journal of Polymer Science and Technology JO - American Journal of Polymer Science and Technology SP - 76 EP - 81 PB - Science Publishing Group SN - 2575-5986 UR - https://doi.org/10.11648/j.ajpst.20170304.14 AB - In this study, biodegradable cassava starch/poly (vinyl alcohol) (PVA) trays with and without poly (lactic acid) (PLA) coating were evaluated as possible substitutes for expanded poly (styrene) (EPS) trays in strawberry packaging. The parameters evaluated were physical and chemical parameters of pH, soluble solids and titratable acidity for strawberries, strawberry and trays moisture content and the mass loss of the systems. In addition, the amount of molds and yeasts was determined in both strawberries and trays. None of the trays used in this study caused changes in the physical and chemical parameters of the strawberries. The molds and yeasts growth was higher in the strawberries packed in EPS compared with the other packaging. The trays with PLA coating and the EPS trays had statistically equal mass loss. The PLA coating applied on cassava starch-based trays was efficient as moisture absorption barrier. VL - 3 IS - 4 ER -