Improved Processing Research on Arc Tooth Cylindrical Gear

Zhang Zheng; Tang Rui

doi:doi:10.11648/j.ijema.20170503.14

| Peer-Reviewed

Improved Processing Research on Arc Tooth Cylindrical Gear

Zhang Zheng, Tang Rui

Published in International Journal of Environmental Monitoring and Analysis (Volume 5, Issue 3)

Received: 24 February 2017 Accepted: 23 March 2017 Published: 29 June 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.

Published in	International Journal of Environmental Monitoring and Analysis (Volume 5, Issue 3)
DOI	10.11648/j.ijema.20170503.14
Page(s)	91-95
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Arc Tooth Cylindrical Gear, Double-Edged Milling, Processing Method

References

[1]	Hai-xiang li. Basic theory of gear transmission and the growing surface test research [D]. Chongqing university, 2012.
[2]	Xiao-wei sun. The characteristics and processing method of arc tooth gear [J]. Journal of mechanical engineer, (8):1999-22.
[3]	Yang Zhi. Small module the study of the theory of the spiral bevel gear nc gear cutting processing [D]. Suzhou: suzhou university, 2004.
[4]	Guo Haisheng. A new type of cylindrical gear teeth method research [J]. Journal of shanxi coal, 1997, (2):27 to 30, and technology press, 1991
[5]	Zou Min. Arc cylindrical gear tooth line parameter calculation and selection [J]. Journal of mechanical design and research, 2000, 2:36 to 38.
[6]	Yutang dai, there have been He Xing, de-sheng jiang. Arc cylindrical gear tooth line nc hobbing mechanism and experimental study [J]. Journal of mechanical engineering, 2006, 17 (7):706-709.
[7]	KouShiYao Liu Mingbao, liang-chen wu. A new method of arc tooth cylindrical gears processing [J]. Modern manufacturing engineering, 2002 (9):16-17.
[8]	Ai-ping song, wei-wei wu, noble, Gao Wenjie. Arc tooth cylindrical gears ideal geometric parameters and their processing methods [J]. Journal of Shanghai jiaotong university, 2010. 44 (12):1735-1740.
[9]	Wu Daren LuoGuShun. Gear engagement principle [M]. Beijing: the new era of publishing house, 1983.
[10]	R. T. Tseng, C. B. Tsay. Mathematical model and undercutting of cylindrical gears with curvilinear shaped teeth [J]. Mechanism and Machine Theory, 2001, 36:1189-1202.

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhang Zheng, Tang Rui. (2017). Improved Processing Research on Arc Tooth Cylindrical Gear. International Journal of Environmental Monitoring and Analysis, 5(3), 91-95. https://doi.org/10.11648/j.ijema.20170503.14

Copy | Download

ACS Style

Zhang Zheng; Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int. J. Environ. Monit. Anal. 2017, 5(3), 91-95. doi: 10.11648/j.ijema.20170503.14

Copy | Download

AMA Style

Zhang Zheng, Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int J Environ Monit Anal. 2017;5(3):91-95. doi: 10.11648/j.ijema.20170503.14

Copy | Download

@article{10.11648/j.ijema.20170503.14,
  author = {Zhang Zheng and Tang Rui},
  title = {Improved Processing Research on Arc Tooth Cylindrical Gear},
  journal = {International Journal of Environmental Monitoring and Analysis},
  volume = {5},
  number = {3},
  pages = {91-95},
  doi = {10.11648/j.ijema.20170503.14},
  url = {https://doi.org/10.11648/j.ijema.20170503.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.20170503.14},
  abstract = {Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Improved Processing Research on Arc Tooth Cylindrical Gear
AU  - Zhang Zheng
AU  - Tang Rui
Y1  - 2017/06/29
PY  - 2017
N1  - https://doi.org/10.11648/j.ijema.20170503.14
DO  - 10.11648/j.ijema.20170503.14
T2  - International Journal of Environmental Monitoring and Analysis
JF  - International Journal of Environmental Monitoring and Analysis
JO  - International Journal of Environmental Monitoring and Analysis
SP  - 91
EP  - 95
PB  - Science Publishing Group
SN  - 2328-7667
UR  - https://doi.org/10.11648/j.ijema.20170503.14
AB  - Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.
VL  - 5
IS  - 3
ER  -

Copy | Download

Author Information

Zhang Zheng

School of Mechanical Engineering, Xihua University, Chengdu, China
Tang Rui

School of Mechanical Engineering, Panzhihua University, Panzhihua, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhang Zheng, Tang Rui. (2017). Improved Processing Research on Arc Tooth Cylindrical Gear. International Journal of Environmental Monitoring and Analysis, 5(3), 91-95. https://doi.org/10.11648/j.ijema.20170503.14

Copy | Download

ACS Style

Zhang Zheng; Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int. J. Environ. Monit. Anal. 2017, 5(3), 91-95. doi: 10.11648/j.ijema.20170503.14

Copy | Download

AMA Style

Zhang Zheng, Tang Rui. Improved Processing Research on Arc Tooth Cylindrical Gear. Int J Environ Monit Anal. 2017;5(3):91-95. doi: 10.11648/j.ijema.20170503.14

Copy | Download

@article{10.11648/j.ijema.20170503.14,
  author = {Zhang Zheng and Tang Rui},
  title = {Improved Processing Research on Arc Tooth Cylindrical Gear},
  journal = {International Journal of Environmental Monitoring and Analysis},
  volume = {5},
  number = {3},
  pages = {91-95},
  doi = {10.11648/j.ijema.20170503.14},
  url = {https://doi.org/10.11648/j.ijema.20170503.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.20170503.14},
  abstract = {Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Improved Processing Research on Arc Tooth Cylindrical Gear
AU  - Zhang Zheng
AU  - Tang Rui
Y1  - 2017/06/29
PY  - 2017
N1  - https://doi.org/10.11648/j.ijema.20170503.14
DO  - 10.11648/j.ijema.20170503.14
T2  - International Journal of Environmental Monitoring and Analysis
JF  - International Journal of Environmental Monitoring and Analysis
JO  - International Journal of Environmental Monitoring and Analysis
SP  - 91
EP  - 95
PB  - Science Publishing Group
SN  - 2328-7667
UR  - https://doi.org/10.11648/j.ijema.20170503.14
AB  - Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.
VL  - 5
IS  - 3
ER  -

Copy | Download