Circular monopole antenna design is very attractive research area in smart city area. There have been many research works in that area for getting the better performance and higher accuracy. The paper presents the development of circular monopole antenna for intelligent transportation system based on the idea of vehicular communication network. In this work, the design of antenna parameters are very important to make the novel design of proposed antenna system with specific frequency range. At first, the radiation efficiency with respect to height, dielectric constant and Resonant Frequency of the substrate for designing the antenna system. And then, the effective permittivity versus width and length of the proposed antenna system. The design with stripline circular monopole antenna and coplanar waveguide circular monopole antenna have been developed with the help of FEKO software and MATLAB codes. The return loss with SL-CMA and CPWCMA by using the reflection coefficient and smith chart analysis. And the radiation pattern based on E-plane and H-plane and far-field with 3D plot have been analyzed by using simulation tools. The simulation results confirmed the designed monopole antenna has been received the better performance for intelligent transportation system applications. Based on the simulation results, the proposed antenna design would be utilized for Intelligent Transportation System with specific frequency.
Published in | Software Engineering (Volume 6, Issue 3) |
DOI | 10.11648/j.se.20180603.12 |
Page(s) | 89-97 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2018. Published by Science Publishing Group |
Circular Monopole Antenna, Intelligent Transportation System, FEKO, MATLAB, Simulation Results
[1] | WilhelmGrabow, “A Study On Diversity Techniques In A 5.8 Ghz Microwave Link For Traffic Management Systems”, IEEE MTT-SDigest 1990, p. 556 - 560 |
[2] | NagendraKushwaha et al, “Design Of Slotted Ground Hexagonal Microstrip Patch Antenna And Gain Improvement With FSS Screen”, Progress In Electromagnetics Research B, Vol. 51, 177-199, 2013 |
[3] | R. SadeghiFakhr, “Compact Size And Dual Band SemicircleShaped Antenna For Mimo Applications”, Progress In Electromagnetics Research C, Vol. 11, 147-154, 2009 |
[4] | RibhuAbhusan Panda “Modified Rectangular Microstrip Patch Antenna for 5GApplication at 28GHz"IOSR Journal of Electronics and Communication Engineering, Volume 12, Issue 4, Ver. V (Jul.-Aug. 2017) |
[5] | VidyaDeshmukh, “Analysis & Designing Of E-Shape Microstrip Antenna With Slot For Ism Band”, International Journal of Research inEngineering & Technology (IMPACT: IJRET), Vol. 2, Issue 7, Jul 2014, 41-48 |
[6] | Fu S, Kong Q, Fang S, et al. Broadband circularly polarized microstrip antenna with coplanar parasitic ring slot patch for L-band satellite system application. IEEE Antennas Wirel. Propag. Lett. 2014;13:943–946. |
[7] | Li Y, Zhang Z, Chen W, et al. A dual-polarization slot antenna using a compact CPW feeding structure. IEEE Antennas Wirel. Propag. Lett. 2010;9:191–194. |
[8] | Row J-S, Tsai J-F. Frequency-reconfigurable microstrip patch antennas with circular polarization. IEEE Antennas Wirel. Propag. Lett. 2014;13:1112–1115. |
[9] | Li Y, Zhang Z, Chen W, et al. Polarization reconfigurable slot antenna with a novel Compact CPW-to-slotline transition for WLAN application. IEEE Antennas Wirel. Propag. Lett. 2010;9:252–255. |
[10] | Tong K-F, Huang J. New proximity coupled feeding method for reconfigurable circularly polarized microstrip ring antennas. IEEE Trans. Antennas Propag. 2008;56:1860–1866. |
[11] | Nasimuddin, Chen ZN, Qing X. Asymmetric-circular shaped slotted microstrip antennas for circular polarization and RFID applications. IEEE Trans. Antennas Propag. 2010;58:3821–3828. |
[12] | Tran HH, Ta SX, Park I. Single-feed, wideband, circularly polarized, crossed bowtie dipole antenna for global navigation satellite systems. J. Electromagn. Eng. Sci. 2014;14:299–305. |
[13] | Qin P-Y, Weily A-R, Guo Y-J, et al. Polarization reconfigurable U-slot patch antenna. IEEE Trans. Antennas Propag. 2010;58:3383–3388. |
[14] | Khidre A, Lee K-F, Yang F, et al. Circular polarization reconfigurable wideband E-shaped patch antenna for wireless applications. IEEE Trans. Antennas Propag. 2013;61:960–964. |
[15] | Kim B, Pan B, Nikolaou S, et al. A novel single-feed circular microstrip antenna with reconfigurable polarization capability. IEEE Trans. Antennas Propag. 2008;56:630–638. |
[16] | Nishamol M-S, Sarin V-P, Tony D, et al. An electronically reconfigurable microstrip antenna with switchable slots for polarization diversity. IEEE Trans. Antennas Propag. 2011;59:3424–3427. |
[17] | Pyo S, Sung Y. Microstrip antenna perturbed by a defected ground structure with a reconfigurable polarization capability. Microwave Opt. Technol. Lett. 2012;54:58–61. |
[18] | Yang Z-X, Yang H-C, Hong J-S, et al. Bandwidth enhancement of a polarizationreconfigurable patch antenna with stair-slots on the ground. IEEE Antennas Wirel. Propag. Lett. 2014;13:579–582. |
[19] | Yang X-X, Shao B-C, Yang F, et al. A polarization reconfigurable patch antenna with loop slots on the ground plane. IEEE Antennas Wirel. Propag. Lett. 2012;11:69–72. |
[20] | Tu Z-H, Chu Q-X, Zhang Q-Y. High-gain slot antenna with parasitic patch and windowed metallic superstrate. Prog. Electromagnet. Res. Lett. 2010;15:27–36. |
[21] | Yoon W-S, Baik J-W, Lee H-S, et al. A reconfigurable circularly polarized microstrip antenna with a slotted ground plane. IEEE Antennas Wirel. Propag. Lett. 2010;9:1161–1164. |
APA Style
Khaing Wai Pyone. (2018). Development of Circular Monopole Antenna for Intelligent Transportation System. Software Engineering, 6(3), 89-97. https://doi.org/10.11648/j.se.20180603.12
ACS Style
Khaing Wai Pyone. Development of Circular Monopole Antenna for Intelligent Transportation System. Softw. Eng. 2018, 6(3), 89-97. doi: 10.11648/j.se.20180603.12
@article{10.11648/j.se.20180603.12, author = {Khaing Wai Pyone}, title = {Development of Circular Monopole Antenna for Intelligent Transportation System}, journal = {Software Engineering}, volume = {6}, number = {3}, pages = {89-97}, doi = {10.11648/j.se.20180603.12}, url = {https://doi.org/10.11648/j.se.20180603.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.se.20180603.12}, abstract = {Circular monopole antenna design is very attractive research area in smart city area. There have been many research works in that area for getting the better performance and higher accuracy. The paper presents the development of circular monopole antenna for intelligent transportation system based on the idea of vehicular communication network. In this work, the design of antenna parameters are very important to make the novel design of proposed antenna system with specific frequency range. At first, the radiation efficiency with respect to height, dielectric constant and Resonant Frequency of the substrate for designing the antenna system. And then, the effective permittivity versus width and length of the proposed antenna system. The design with stripline circular monopole antenna and coplanar waveguide circular monopole antenna have been developed with the help of FEKO software and MATLAB codes. The return loss with SL-CMA and CPWCMA by using the reflection coefficient and smith chart analysis. And the radiation pattern based on E-plane and H-plane and far-field with 3D plot have been analyzed by using simulation tools. The simulation results confirmed the designed monopole antenna has been received the better performance for intelligent transportation system applications. Based on the simulation results, the proposed antenna design would be utilized for Intelligent Transportation System with specific frequency.}, year = {2018} }
TY - JOUR T1 - Development of Circular Monopole Antenna for Intelligent Transportation System AU - Khaing Wai Pyone Y1 - 2018/08/21 PY - 2018 N1 - https://doi.org/10.11648/j.se.20180603.12 DO - 10.11648/j.se.20180603.12 T2 - Software Engineering JF - Software Engineering JO - Software Engineering SP - 89 EP - 97 PB - Science Publishing Group SN - 2376-8037 UR - https://doi.org/10.11648/j.se.20180603.12 AB - Circular monopole antenna design is very attractive research area in smart city area. There have been many research works in that area for getting the better performance and higher accuracy. The paper presents the development of circular monopole antenna for intelligent transportation system based on the idea of vehicular communication network. In this work, the design of antenna parameters are very important to make the novel design of proposed antenna system with specific frequency range. At first, the radiation efficiency with respect to height, dielectric constant and Resonant Frequency of the substrate for designing the antenna system. And then, the effective permittivity versus width and length of the proposed antenna system. The design with stripline circular monopole antenna and coplanar waveguide circular monopole antenna have been developed with the help of FEKO software and MATLAB codes. The return loss with SL-CMA and CPWCMA by using the reflection coefficient and smith chart analysis. And the radiation pattern based on E-plane and H-plane and far-field with 3D plot have been analyzed by using simulation tools. The simulation results confirmed the designed monopole antenna has been received the better performance for intelligent transportation system applications. Based on the simulation results, the proposed antenna design would be utilized for Intelligent Transportation System with specific frequency. VL - 6 IS - 3 ER -