International Journal of Materials Science and Applications

Editorial Board Members (161)
  • Prof. Anita Ptiček Siročić
    Faculty of Geochemical Engineering, University of Zagreb, Varaždin, Croatia
  • Prof. Hae Woon Choi
    Department of Mechanical and Automotiv Engineering, Keimyung University, Daegu, South Korea
  • Prof. Mikihiko Nishitani
    Ultrabroadband Photonics Group, Institute of Laser Engineering, Osaka University, Suita, Japan
  • Assoc. Prof. Xingjian Xue
    Department of Mechanical Engineering, University of South Carolina, Columbia, United States
  • Assoc. Prof. Rostand Tayong Boumda
    School of Computer Science and Technology, University of Bedfordshire, Luton, United Kingdom
  • Dr. Rashi Gusain
    Department of Applied Sciences, Northumbria University, Newcastle Upon Tyne, United Kingdom
  • Dr. Gaurav Pande
    Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, United States
  • Dr. Pietro Mazzuca
    Department of Civil Engineering, University of Calabria, Rende, Italy
  • Dr. Sen Wang
    School of Chemistry and Physics, Queensland University of Technology, Brisbane, Australia
  • Dr. Jiantao Wang
    KAUST Solar Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
  • Dr. Monika Poonia
    Department of Chemistry and Biochemistry, The Ohio State University, Columbus, United States
  • Dr. José Ferreira
    Department of Materials Science and Engineering, Iowa State University, Ames, United States
  • Dr. Anirban Kundu
    Center for Multidimensional Carbon Materials, Institute for Basic Science, Ulsan, South Korea
  • Dr. Samapika Mallik
    Department of Human Intelligence Systems, Kyushu Institute of Technology, Kitakyushu, Japan
  • Dr. Zhijun Liu
    Department of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, United States
  • Dr. David Maldonado
    Materials Research, Innovations for High Performance Microelectronics, Frankfurt, Germany
  • Dr. Mattia Nieddu
    Department of Biogenic Functional Material, Technical University of Munich, Straubing, Germany
  • Dr. Yongjoo Cho
    Kyulux Inc., Fukuoka, Japan
  • Dr. Jehad Kharraz
    Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
  • Mounarik Mondal
    Department of Mechnanical Engineering, Kongju National University, Cheonan, South Korea
  • Melike Dizbay-Onat
    Department of Mechanical Engineering, University of South Alabama, Mobile, United States
  • Muhammad Asif Nawaz
    Department of Inorganic Chemistry and Materials Sciences Institute, University of Seville, Seville, Spain
  • Japhet Tiegoum Wembe
    Department of Civil Engineering, CY Cergy Paris University, Cergy, France
  • Jixing Cao
    Department of Civil and Environmental Engineering, National University of Singapore, Singapore
  • Prof. Saim Ates
    Forest Industrial Engineering, Kastamonu University, Kastamonu, Turkey
  • Prof. Jian Peng
    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China
  • Prof. Atilla Evcin
    Department of Materials Science and Engineering, Afyon Kocatepe University, Afyonkarahisar, Turkey
  • Prof. Ariosto Medina
    Research Institute in Metallurgy and Materials, Michoacan University of Saint Nicholas of Hidalgo, Morelia, Mexico
  • Prof. Li Haitao
    School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang, China
  • Prof. Xiaogang You
    Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, China
  • Assoc. Prof. Likai Yang
    State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China
  • Assoc. Prof. Jian Zhao
    College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan, China
  • Assoc. Prof. Xiaofang Zhao
    School of Mathematics, Statistics and Mechanics, Beijing University of Technology, Beijing, China
  • Assoc. Prof. Hüseyin Fırat Kayıran
    Department of Mechanics, Agricultural and Rural Development Support Institution, Mersin, Turkey
  • Assoc. Prof. Bingrong Miao
    State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu, China
  • Assoc. Prof. Ming Wang
    School of Mechanical Engineering, Ningxia University, Yinchuan, China
  • Assoc. Prof. Jizhuang Wang
    College of Chemistry and Materials Science, Jinan University, Guangzhou, China
  • Assoc. Prof. Vinícius Veloso
    Department of Mechanical Engineering, Centro Universitário UNA, Belo Horizonte, Brazil
  • Dr. Yongchun Xiao
    College of Materials Science and Engineering, Hunan University, Changsha, China
  • Dr. Muhammad Sajid Khan
    Department of Mechanical Engineering, Institute of Innovation Research of Shengzhou, Zhejiang University of Technology, Shengzhou, China
  • Dr. Nouman Ali Shah
    School of Material Science and Engineering, Sun Yat Sen University, Guangzhou, China
  • Dr. Liangjuan Gao
    College of Materials Science and Engineering, Sichuan University, Chengdu, China
  • Dr. Huiying Qi
    College of Chemistry and Bioengineering, Shandong University of Science and Technology, Qingdao, China
  • Dr. Saranya Govindarajan
    Beijing Computational Science Research Center, Beijing, China
  • Dr. Wei Li
    Division of Surface Engineering of Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
  • Dr. Xiangyang Lou
    Department of Environment, Southern University of Science and Technology, Shenzhen, China
  • Shaohua Li
    College of New Energy, China University of Petroleum (East China), Dongying, China
  • Zohreh Shahnavaz
    Materials Science and Engineering School, Jiangsu University, Zhenjiang, China
  • Bin Zhang
    School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou, China
  • Abeer Adel Salih
    Department of Mechanical and Manufacturing Engineering, National University of Malaysia, Selangor, Malaysia
  • Todorka Vladkova
    Department of Polymer Engineering, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
  • Mao Fu
    College of Geography and Environmental Science, Guizhou Normal University, Guizhou, China
  • Aizuddin Supee
    Department of Energy Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
  • Prof. Mohamed Yagoub
    Department of Civil Engineering, University of Biskra, Biskra, Algeria
  • Assoc. Prof. Ibrahim Yaacoub Bouderbala
    Department of Optics, Ferhat Abbas University Setif 1, Setif, Algeria
  • Dr. Manikandan Maruthappan
    Department of Physics and Materials Sciences, Chiang Mai University, Chiang Mai, Thailand
  • Dr. Senthilkumar Nangan
    Metallurgy and Materials Science Research Institute, Chulalongkorn University, Bangkok, Thailand
  • Dr. Manoj Kumar Singh
    Department of Materials and Production Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand
  • Prof. Ravindranadh Koutavarapu
    Department of Basic Sciences and Humanities, GMR Institute of Technology, GMR Nagar, Rajam, Vizianagaram-532127, India
  • Prof. Dheerendra Singh Yadav
    Department of Physics, Chaudhary Charan Singh Post Graduate College, Etawah, India
  • Prof. Jinnah Sheik Mohamed M
    Department of Mechanical Engineering, Nellai College of Engineering, Tirunelveli, India
  • Prof. Jasbeer Singh Sidhu
    Department of Mechanical Engineering, MGM's College of Engineering and Technology, Nanded, India
  • Prof. A Vijay Kumar
    Department of Mechanical Engineering, Raghu Engineering College, Visakhapatnam, India
  • Prof. Sanjeev Kumar Verma
    Department of Civil Engineering, School of Engineering and Technology, Sanjeev Agrawal Global Educational University, Bhopal, India
  • Assist. Prof. Monalisa Char
    Department of Materials Science and Technology, Maulana Abul Kalam Azad University of Technology, Kolkata, India
  • Assist. Prof. Sheetal Chopra
    Department of Fabric and Apparel Science, Lady Irwin College, University of Delhi, New Delhi, India
  • Assoc. Prof. R Vara Prasad Kaviti
    Department of Mechanical Engineering, Brindavan College of Engineering, Bangalore, India
  • Assoc. Prof. P Baraneedharan
    Centre of Excellence in Photonics and Nanotechnology Research, Saveetha Engineering College, Chennai, India
  • Assoc. Prof. Thanuj Kumar M
    Department of Robotics and Automation, Rajarajeswari College of Engineering, Bengaluru, India
  • Assoc. Prof. Sorna Gowri Vijaya Kumar
    Department of Industrial Waste Utilisation Nano and Biomaterials, Council of Scientific and Industrial Research-Advanced Materials and Processes Research Institute, Bhopal, India
  • Assoc. Prof. Sonu Saini
    Department of Mechanical Engineering, Anand International Collge of Engneering, Jaipur, India
  • Assoc. Prof. Dr. Maunik Jani
    Department of Physics, Shri Govind Guru University, Godhra, India
  • Dr. Murtuja Husain
    Department of Materials Engineering, Council of Scientific and Industrial Research-National Metallurgical Laboratory, Jamshedpur, India
  • Dr. Dipendra Singh Rawal
    Solid State Physics Laboratory , Defence Research and Development Organisation, Min of Defence, Govt of India, Delhi, India
  • Dr. Archana Sharma
    Department of Physics, Indian Institute of Technology Bombay, Mumbai, India
  • Dr. Saisree S
    Department of Material Science and Technology, CSIR - National Institute For Interdisciplinary Science and Technology, Trivandrum, India
  • Dr. Ankit Kumar Kumar
    Department of Physics, Indian Institute of Science Education and Research, Pune, India
  • Dr. Sundeep Dhawan
    Division of Advanced Nanocomposite, Vikas Lifecare Limited, New Delhi, India
  • Md Dilwar Alam Khan
    Department of Chemistry, Srikishan Sarda College, Hailakandi, India
  • Durga Prasad
    Advanced Materials and Characterization Research Group, Research and Development, TATA Steel Ltd, Jamshedpur, India
  • Sai Prasad Nayak
    Department of Chemistry, Dayananda Sagar University, Bangalore, India
  • Prof. António Magalhães
    Department of Mechanical Engineering, Polytechnic Institute of Porto, Porto, Portugal
  • Prof. Vassilis Kostopoulos
    Department of Mechanical Engineering and Aeronautics, University of Patras, Patras, Greece
  • Assoc. Prof. Slavko Kralj
    Jožef Stefan Institute, Ljubljana, Slovenia
  • Assoc. Prof. Raul Campilho
    Mechanical Engineering, Polytechnic of Porto - School of Engineering, Porto, Portugal
  • Dr. Haroune Rachid Ben Zine
    Department of Thin-Film Physics, Institute of Technical Physics and Materials Science, Budapest, Hungary
  • Dr. Mrinal Hota
    Materials Research Lab, University of Illinois Urbana-Champaign, Urbana, United States
  • Dr. Wenyou Zhang
    Department of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin, Ireland
  • Dr. Rupesh Kandel
    Department of Bionanotechnology and Bionanoconvergence Engineering, Jeonbuk National University, Jeonju, South Korea
  • Dr. Xingyi Shi
    Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong
  • Dr. Krishna Chaitanya Pitike
    Nuclear Sciences Division, Pacific Northwest National Laboratory, Richland, United States
  • Dr. Parvaneh Esmaeilnejad-Ahranjani
    Department for Materials Synthesis, Jožef Stefan Institute, Ljubljana, Slovenia
  • Dr. Jialiang Wang
    Department of Civil and Architectural Engineering, Aarhus University, Aarhus, Denmark
  • Dr. Azam Nasirian
    Department of Energy System Research, Ajou University, Suwon, South Korea
  • Dr. Sacha Cavelier
    ARC Training Centre for Cell and Tissue Engineering Technologies, Queensland University of Technology, Brisbane, Australia
  • Dr. Prabhat Tripathy
    Idaho National Laboratory, Idaho Falls, United States
  • Dr. Rustam Singh
    Jordi Labs, Mansfield, United States
  • Dr. Satyaranjan Bairagi
    Systems Power and Energy Materials and Manufacturing Research Group University of Glasgow Glasgow, G12 8QQ, UK, Glasgow, United Kingdom
  • Dr. Preeti Gupta
    Institute of Integrative Nanoscience, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
  • Sylwia Olenska
    Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences, Warsaw, Poland
  • Muhanna Al-Muhanna
    Advanced Manufacturing Technologies Institute, Industry and Energy Sector, King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
  • Reham Shabara
    Department of Physics, Collage of Sciences, Taibah University, Almadinah-Almunawara, Saudi Arabia
  • Iryna Galstian
    Department of Electronic Structure and Electronic Properties, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
  • Prof. Weiwei Dong
    College of Mechanical Engineering, Donghua University, Shanghai, China
  • Prof. Guoliang Qin
    School of Materials Science and Engineering, Shandong University, Ji’nan, China
  • Prof. Aydin Şik
    Department of Industrial Design, Gazi University, Ankara, Turkey
  • Prof. Eduardo Nobrega
    Department of Quantum Electronics, Rio de Janeiro State University, Rio de Janeiro, Brazil
  • Prof. Necmi Dege
    Department of Physics, Ondokuz Mayıs University, Samsun, Turkey
  • Prof. Xiaoming Sun
    State Key Laboratory of Mesoscience and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
  • Assist. Prof. Mustafa Engin Kocadağistan
    Department of Metallurgy and Materials Engineering, Ataturk University, Erzurum, Turkey
  • Assoc. Prof. Yong Gao
    Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, China
  • Assoc. Prof. Xianmou Fan
    Department of Plastic Surgery, Guangdong Provincial Key Laboratory of Autophagy and Major Chronic Non-communicable Diseases, Zhanjang, China
  • Assoc. Prof. Fatih Mehmet Coşkun
    Department of Physics Engineering, Istanbul Medeniyet University, Istanbul, Turkey
  • Assoc. Prof. Chuan Guo
    Department of School of Advanced Manufacturing, Sun Yat-Sen University, Shenzhen, China
  • Assoc. Prof. Jianfei Liu
    Northwest Institute for Non-Ferrous Metal Research, Xi'an, China
  • Assoc. Prof. Rita Sales
    Department of Areonautical Structures, Technology College of São José dos Campos Prof. Jessen Vidal, Sao Jose dos Campos, Brazil
  • Assoc. Prof. Nürettin Akçakale
    Department of Textile, Clothing, Footwear and Leather, Bolu Abant Izzet Baysal University, Bolu, Turkey
  • Assoc. Prof. King Jye Wong
    Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia
  • Dr. Wang Haoying
    Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China
  • Dr. Chengcheng Fan
    School of Infrastructure Engineering, Dalian University of Technology, Dalian, China
  • Dr. Tao Chen
    Research Institute of Technology, Shougang Group Co., Ltd, Beijing, China
  • Dr. Long Wang
    Science and Technology on Reliability and Environmental Engineering Laboratory, Beijing Institute of Structure and Environment Engineering, Beijing, China
  • Dr. Sun Zhaoqian
    State Key Laboratory of Nonferrous Metals and Processes, Grimat Engineering Institute Co., Ltd., Beijing, China
  • Dr. Lushi Kong
    State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, CNPC Tubular Goods Research Institute, Xi'an, China
  • Dr. Mina Namvari
    Sabancı University Nanotechnology Research and Application Center, Sabancı University, Istanbul, Turkey
  • Yiqi Fang
    Xi'an Institute of Electronic Engineering, China North Industries Group Corporation Limited, Xi'an, China
  • Di Wang
    School of Mechanical and Materials Engineering, Xi'an University, Xi'an, China
  • Ramiro Escudero
    Department of Extractive Metallurgy, University of Morelia, Morelia, Mexico
  • Ruiji Li
    School of Pharmacy, Jining Medical University, Rizhao, China
  • Yang Li
    Bingtuan Energy Development Institute, Shihezi University, Shihezi, China
  • Evando Araújo
    Department of Materials Science, Federal University of the São Francisco Valley, Pernambuco, Brazil
  • Qian Zhang
    School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, China
  • Ion Valentin
    Innovation Center in Photonics and Plasma for Advanced Materials and Technologies Fotoplasmat, National Institute for Laser, Plasma and Radiation physics, Magurele, Romania
  • Assoc. Prof. Mohamed Lahoual
    Department of Physics, University of Djelfa, Djelfa, Algeria
  • Dr. Badis Rahal
    Department of Materials Physics, Algiers Nuclear Research Center, Algiers, Algeria
  • Dr. Ipfi Mathoho
    Department of Manufacturing, Council for Scientific and Industrial Research, Pretoria, South Africa
  • Dr. Mourad Azibi
    Department of Ionized Media and Laser, Center for Development of Advanced Technologies, Algiers, Algeria
  • Amel D. Hussein
    College of Dentistry, Wasit University, Kut, Iraq
  • Prof. Sivarama Krishnaiah
    Department of Mechanical Engineering, SVR Engineering College, Nandyal, India
  • Prof. Rajesh Narayana Perumal
    School of Science and Humanities, Shiv Nadar University, Chennai, India
  • Prof. Himanshu Narayan
    Department of Physics, Usha Martin University, Ranchi, India
  • Prof. Manoj Kumar
    Metal Extraction and Recycling Division, Council of Scientific and Industrial Research-National Metallurgical Laboratory, East Singhbhum, India
  • Assist. Prof. Rajesh Jha
    Department of Electronics and Communication Engineering, ICFAI Foundation for Higher Education, Hyderabad, India
  • Assist. Prof. Sunil Kumar
    Department of Electronic Science, Babasaheb Bhimrao Ambedkar Bihar University, Bihar, India
  • Assoc. Prof. Ashok Atulkar
    Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore, India
  • Assoc. Prof. Vijayalakshmi Sanyal
    PG And Research Department Of Physics, Thiru. A. Govindasamy Government Arts College, Tindivanam, India
  • Assoc. Prof. Vijayalaxmi Sonkamble
    Department of Mechanical Engineering, Jawaharlal Nehru Engineering College, MGM University Aurangabad, Aurangabad, India
  • Assoc. Prof. Pramod Bhingole
    Department of Mechanical and Aerospace Engineering, Institute of Infrastructure, Technology, Research and Management, Ahmedabad, India
  • Assoc. Prof. Sunu Surendran K. T.
    Department of Mechanical Engineering, KMCT College of Engineering, Calicut, India
  • Assoc. Prof. Saravanan M Paramasivam
    Department of Mechenical Engineering, Saveetha Engineering College, Chennai, India
  • Assoc. Prof. Rajendran Chinnasamy
    Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, India
  • Dr. Swetarekha Ram
    Department of Physics, Indo-Korea Science and Technology Center, Bangalore, India
  • Dr. Vinit Sharma
    Shoolini Lifesciences Pvt. Ltd., Shoolini University, Solan, India
  • Dr. Prakash Sarkar
    Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, India
  • Dr. Arpana Parihar
    Microfluidics and MEMS Center, CSIR- Advanced Material Process Research Institute, Bhopal, India
  • Dr. Amarnath Marimuthu
    Plasma Research Laboratory, The Bombay Textile Research Association, Mumbai, India
  • Dr. Souvick Das
    Department of Physics, The University of Burdwan, Chinsurah, India
  • Balaga Viswanadham
    GMR Institute of Technology, Rajam, India
  • Infanta Diana Michael
    Department of Physics, Bharathiar University, Coimbatore, India
  • Madhu P
    Department of Mechanical Engineering, Malnad College of Engineering, Hassan, India
  • Manujesh B J
    Department of Mechanical Engineering, Vivekananda College of Engineering and Technology Puttur, Puttur, India