Science Research

| Peer-Reviewed |

Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure

Received: Jan. 02, 2019    Accepted: Jan. 21, 2019    Published: Oct. 16, 2019
Views:       Downloads:

Share This Article

Abstract

Though metal foams possess excellent overall performances, its performances behave quite different due to its apparent aperture difference of pores diameter, pores roundness and significant macrostructure flaws, such as sharp edged pores and incomplete cell walls. It is meaningful to reduce macrostructure defects or improve pores structure uniformity of metal foams from the view point of practical applications. In this work, different thickening agents were added into AZ31B magnesium composite foams to balance foaming process and improve the homogeneity of pore diameter, pore roundness and cell wall integrity. The results showed that pore diameter, roundness of the pores and integrity of cell walls were obviously influenced by thickening agents. Based on a large number of experimental results, calcium granules and magnesium cerium intermediate alloy were used to control the number and morphology of solid particles in magnesium melt, and a kind of magnesium composite foams with fine roundness pores and complete cell wall structure were obtained.

DOI 10.11648/j.sr.20190704.12
Published in Science Research ( Volume 7, Issue 4, August 2019 )
Page(s) 51-59
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Magnesium Matrix Composite Foam, Spatial Structure, Solid Particles, Ceramic Microspheres

References
[1] J. Banhart, Manufacture, characterisation and application of cellular metals and metal foams, Prog. Mater. Sci. 46 (2001) 559–632. doi: 10.1016/S0079-6425(00)00002-5.
[2] Y. Liao, G. Qiu, Y. Yang, X. Lv, C. Bai, C. University, Preparation and Compressive Properties of Magnesium Foam, Rare Met. Mater. Eng. 45 (2016) 2498–2502.
[3] J. Liu, S. Shi, Z. Zheng, K. Huang, Y. Yan, Characterization and Compressive Properties of Ni/Mg Hybrid Foams, Mater. Sci. Eng. A. 708 (2017).
[4] X. Z. Yue, K. Kitazono, X. J. Yue, B. Y. Hur, Effect of fluidity on the manufacturing of open cell magnesium alloy foams, J. Magnes. Alloy. 4 (2016) 1–7.
[5] H. Anantharaman, V. C. Shunmugasamy, O. M. S. Iii, N. Gupta, K. Cho, Dynamic properties of silicon carbide hollow particle filled magnesium alloy (AZ91D) matrix syntactic foams, Int. J. Impact Eng. 82 (2015) 14–24.
[6] S. Bhogi, M. Mukherjee, Foam stabilization by magnesium, Mater. Lett. (2017).
[7] K. Heim, G. S. Vinod-Kumar, F. García-Moreno, A. Rack, J. Banhart, Stabilisation of aluminium foams and films by the joint action of dispersed particles and oxide films, Acta Mater. 99 (2015) 313–324.
[8] R. Deleurence, C. Freymond, T. Saison, F. Lequeux, C. Monteux, Foamability and stability of foams obtained with silica/PEI gels, Colloids Surfaces A Physicochem. Eng. Asp. 534 (2017).
[9] K. N. Braszczyńska-Malik, J. Kamieniak, Analysis of interface between components in AZ91 magnesium alloy foam composite with Ni-P coated fly ash cenospheres, J. Alloy. Compd. 720 (2017) 352–359.
[10] K. N. Braszczyńska-Malik, J. Kamieniak, AZ91 magnesium matrix foam composites with fly ash cenospheres fabricated by negative pressure infiltration technique, Mater. Charact. 128 (2017).
[11] G. Anbuchezhiyan, B. Mohan, D. Sathianarayanan, T. Muthuramalingam, Synthesis and characterization of hollow glass microspheres reinforced magnesium alloy matrix syntactic foam, J. Alloy. Compd. 719 (2017) 125–132.
[12] N. Politova, S. Tcholakova, Z. Valkova, K. Golemanov, N. D. Denkov, Self-regulation of foam volume and bubble size during foaming via shear mixing, Colloids Surfaces A Physicochem. Eng. Asp. 539 (2018) 18–28.
[13] Z. Sun, L. Gao, Effect of Elastic Modulus of Ductile Cast Iron on Graphite Morphology, Hot Work. Technol. 40 (2011) 34–38.
[14] D. Falliano, D. De Domenico, G. Ricciardi, E. Gugliandolo, Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density, Constr. Build. Mater. 165 (2018) 735–749.
[15] A. Aldoshan, S. Khanna, Effect of relative density on the dynamic compressive behavior of carbon nanotube reinforced aluminum foam, Mater. Sci. Eng. A. 689 (2017) 17–24.
[16] B. I. Yu-Shun, X. Q. Zuo, Preparation Method and Application of Porous Foam Metal, Nonferrous Met. Process. (2007).
[17] Wang, Y. M, Zhang, B. C, Zhou, D. H, Yang, X. J, Z. P, Mold-Filling Ability of Aluminum Alloy Melt during the Two-Step Foaming Process, J. Mater. Sci. Technol. 32 (2016) 509–514.
[18] J. Wang, Z. Zhang, Q. Jiang, X. Xia, C. Qiu, J. Ding, W. Zhao, A novel bubble nucleation particle for magnesium composite foam, Mater. Lett. 193 (2017) 187–190.
[19] X. Xia, J. Feng, J. Ding, K. Song, X. Chen, W. Zhao, B. Liao, B. Hur, Fabrication and characterization of closed-cell magnesium-based composite foams, Mater. Des. 74 (2015) 36–43.
[20] J. Wang, Z. Yin, Z. J. Cao, S. G. Lai, Y. Y. Pei, Evaluation of pellets sphericity using computer assistant image analysis, Chinese Pharm. J. 40 (2005) 529–531.
[21] S. F. Aida, H. Zuhailawati, A. S. Anasyida, The Effect of Space Holder Content and Sintering Temperature of Magnesium Foam on Microstructural and Properties Prepared by Sintering Dissolution Process (SDP) Using Carbamide Space Holder, Procedia Eng. (2017) 290–297.
[22] X. C. Xia, X. W. Chen, Z. Zhang, X. Chen, W. M. Zhao, B. Liao, B. Hur, Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam, J. Magnes. Alloy. 1 (2013) 330–335.
[23] T. H. Reddy, S. Pal, K. C. Kumar, M. K. Mohan, V. Kokol, Finite Element Analysis for Mechanical Response of Magnesium Foams with Regular Structure Obtained by Powder Metallurgy Method ☆, Procedia Eng. 149 (2016) 425–430.
[24] M. Mukherjee, F. García-Moreno, C. Jiménez, A. Rack, J. Banhart, Microporosity in aluminium foams, Acta Mater. (2017).
[25] M. González-Nava, A. Cruz-Ramírez, M. Á. Suarez-Rosales, Thermodynamic analysis of the aluminum alloy foaming process by melt route, J. Manuf. Process. 32 (2018) 77–84.
[26] J. T. Zhang, L. P. Chen, J. Yin, Application of Ce Alloying in Magnesium Alloy, Foundry Technol. (2011).
[27] Q. D. Qin, Y. G. Zhao, W. Zhou, P. J. Cong, Effect of phosphorus on microstructure and growth manner of primary Mg 2 Si crystal in Mg 2 Si/Al composite, Mater. Sci. Eng. A. 447 (2007) 186–191.
[28] T. Wübben, S. Odenbach, Stabilisation of liquid metallic foams by solid particles, Colloids Surfaces A Physicochem. Eng. Asp. 266 (2005) 207–213.
[29] G. Kaptay, Interfacial criteria for stabilization of liquid foams by solid particles, Colloids Surfaces A Physicochem. Eng. Asp. 230 (2015) 67–80.
[30] V. Gergely, T. W. Clyne, Drainage in standing liquid metal foams: modelling and experimental observations, Acta Mater. 52 (2004) 3047–3058.
[31] M. Cuaresma, M. Vázquez, J. L. F. Cordero, I. G. Nores, C. Vílchez, Selection of microalgae with potential for cultivation in surfactant-stabilized foam, Algal Res. 31 (2018).
Cite This Article
  • APA Style

    Nannan Wang, Jing Wang, Xingchuan Xia, Weimin Zhao. (2019). Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure. Science Research, 7(4), 51-59. https://doi.org/10.11648/j.sr.20190704.12

    Copy | Download

    ACS Style

    Nannan Wang; Jing Wang; Xingchuan Xia; Weimin Zhao. Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure. Sci. Res. 2019, 7(4), 51-59. doi: 10.11648/j.sr.20190704.12

    Copy | Download

    AMA Style

    Nannan Wang, Jing Wang, Xingchuan Xia, Weimin Zhao. Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure. Sci Res. 2019;7(4):51-59. doi: 10.11648/j.sr.20190704.12

    Copy | Download

  • @article{10.11648/j.sr.20190704.12,
      author = {Nannan Wang and Jing Wang and Xingchuan Xia and Weimin Zhao},
      title = {Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure},
      journal = {Science Research},
      volume = {7},
      number = {4},
      pages = {51-59},
      doi = {10.11648/j.sr.20190704.12},
      url = {https://doi.org/10.11648/j.sr.20190704.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sr.20190704.12},
      abstract = {Though metal foams possess excellent overall performances, its performances behave quite different due to its apparent aperture difference of pores diameter, pores roundness and significant macrostructure flaws, such as sharp edged pores and incomplete cell walls. It is meaningful to reduce macrostructure defects or improve pores structure uniformity of metal foams from the view point of practical applications. In this work, different thickening agents were added into AZ31B magnesium composite foams to balance foaming process and improve the homogeneity of pore diameter, pore roundness and cell wall integrity. The results showed that pore diameter, roundness of the pores and integrity of cell walls were obviously influenced by thickening agents. Based on a large number of experimental results, calcium granules and magnesium cerium intermediate alloy were used to control the number and morphology of solid particles in magnesium melt, and a kind of magnesium composite foams with fine roundness pores and complete cell wall structure were obtained.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Fabrication of Closed-Cell Magnesium Composite Foam with Fine and High Roundness Pore Structure
    AU  - Nannan Wang
    AU  - Jing Wang
    AU  - Xingchuan Xia
    AU  - Weimin Zhao
    Y1  - 2019/10/16
    PY  - 2019
    N1  - https://doi.org/10.11648/j.sr.20190704.12
    DO  - 10.11648/j.sr.20190704.12
    T2  - Science Research
    JF  - Science Research
    JO  - Science Research
    SP  - 51
    EP  - 59
    PB  - Science Publishing Group
    SN  - 2329-0927
    UR  - https://doi.org/10.11648/j.sr.20190704.12
    AB  - Though metal foams possess excellent overall performances, its performances behave quite different due to its apparent aperture difference of pores diameter, pores roundness and significant macrostructure flaws, such as sharp edged pores and incomplete cell walls. It is meaningful to reduce macrostructure defects or improve pores structure uniformity of metal foams from the view point of practical applications. In this work, different thickening agents were added into AZ31B magnesium composite foams to balance foaming process and improve the homogeneity of pore diameter, pore roundness and cell wall integrity. The results showed that pore diameter, roundness of the pores and integrity of cell walls were obviously influenced by thickening agents. Based on a large number of experimental results, calcium granules and magnesium cerium intermediate alloy were used to control the number and morphology of solid particles in magnesium melt, and a kind of magnesium composite foams with fine roundness pores and complete cell wall structure were obtained.
    VL  - 7
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • School of Materials Science and Engineering, Hebei University of Technology, Tianjin, PR China

  • School of Materials Science and Engineering, Hebei University of Technology, Tianjin, PR China

  • School of Materials Science and Engineering, Hebei University of Technology, Tianjin, PR China

  • School of Materials Science and Engineering, Hebei University of Technology, Tianjin, PR China

  • Section