Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools

Yasser Alshammari; Djamel Ghernaout; Mohamed Aichouni; Mabrouk Touahmia

doi:doi:10.11648/j.ae.20180202.15

| Peer-Reviewed

Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools

Yasser Alshammari, Djamel Ghernaout, Mohamed Aichouni, Mabrouk Touahmia

Published in Applied Engineering (Volume 2, Issue 2)

Received: 10 December 2018 Accepted: 22 December 2018 Published: 22 January 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In Saudi Arabia, as population growth increases, the need for safe drinking water is more and more increasing for both human use and industrial applications. These requires highly efficient processing plants that meet the growing needs of customers and their expectations of providing more service to all segments of the society at the lowest possible cost. On the other hand, these stations consume high amounts of energy in addition to the high maintenance and operating costs due to emergency breakdowns, which in turn result in lower production and the exit of some units from operation. This research aims to enhance the operational procedures of the stations and to study the possibility of reducing the high consumption of electric power and work to increase the performance of the plants by reducing the costs of maintenance and operation through the application of Quality Tools (QTs). This work focused on: (1) collecting data, equipment inventory, maintenance and operation costs and energy consumption rate of the equipment; (2) analyzing these data using the Seven QTs and the New QTs for Management and Planning; (3) finding solutions and presenting the results using the Minitab software; and, (4) the obtained results will be then generalized to the other stations in other Saudi Arabia regions.

Published in	Applied Engineering (Volume 2, Issue 2)
DOI	10.11648/j.ae.20180202.15
Page(s)	60-71
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Water Treatment Plant (WTP), Quality Tools (QTs), Operational Procedures (OPs), NATIONAL Water Company (NWC), Minitab™, Cause and Effect Diagram (CED), Pareto Diagram (PD), Scatter Diagram (SD)

References

[1]	D. Ghernaout, B. Ghernaout, M.W. Naceur, Embodying the chemical water treatment in the green chemistry – A review, Desalination 271 (2011) 1-10.
[2]	D. Ghernaout, B. Ghernaout, On the concept of the future drinking water treatment plant: Algae harvesting from the algal biomass for biodiesel production––A Review, Desalin. Water Treat. 49 (2012) 1-18.
[3]	D. Ghernaout, Environmental principles in the Holy Koran and the Sayings of the Prophet Muhammad, Am. J. Environ. Prot. 6 (2017) 75-79.
[4]	J. Dai, S. Wu, G. Han, J. Weinberg, X. Xie, X. Wu, X. Song, B. Jia, W. Xue, Q. Yang, Water-energy nexus: A review of methods and tools for macro-assessment, Appl. Energ. 210 (2018) 393-408.
[5]	V. Puleo, V. Notaro, G. Freni, G. La Loggia, Water and energy saving in urban water systems: the ALADIN project, Procedia Engineer. 162 (2016) 396-402.
[6]	V. Notaro, V. Puleo, C.M. Fontanazza, M. Sambito, G. La Loggia, A decision support tool for water and energy saving in the integrated water system, Procedia Engineer. 119 (2015) 1109-1118.
[7]	Energy, J. Energ. Environ. Chem. Eng. 3 (2018) 1-8.
[8]	D. Ghernaout, M. Aichouni, A. Alghamdi, Applying Big Data (BD) in water treatment industry: A new era of advance, Int. J. Adv. Appl. Sci. 5 (2018) 89-97.
[9]	D. Ghernaout, M. Aichouni, A. Alghamdi, N. Ait Messaoudene, Big Data: Myths, realities and perspectives - A remote look, Am. J. Inform. Sci. Technol. 2 (2018) 1-8.
[10]	D. Ghernaout, M. Aichouni, A. Alghamdi, Overlapping ISO/IEC 17025:2017 into Big Data: A review and perspectives, Intern. J. Sci. Qualit. Anal. 4 (2018) 83-92.
[11]	K. Ishikawa, Guide to quality control, Asian Productivity Organization, Tokyo, 1976.
[12]	S. Feudo, A. Corsini, F. Bonacina, E. Tortora, E. Cima, Energy rating of a water pumping station using multivariate analysis, Energy Procedia 126 (2017) 385-391.
[13]	O. Maaß, P. Grundmann, Added-value from linking the value chains of wastewater treatment, crop production and bioenergy production: A case study on reusing wastewater and sludge in crop production in Braunschweig (Germany), Resour. Conserv. Recy. 107 (2016) 195-211.
[14]	J. Henriques, J. Catarino, Sustainable value - An energy efficiency indicator in wastewater treatment plants, J. Clean. Prod. 142 (2017) 323-330.
[15]	D. Ghernaout, The best available technology of water/wastewater treatment and seawater desalination: Simulation of the open sky seawater distillation, Green Sustain. Chem. 3 (2013) 68-88.
[16]	L. Castellet, M. Molinos-Senante, Efficiency assessment of wastewater treatment plants: A data envelopment analysis approach integrating technical, economic, and environmental issues, J. Environ. Manage. 167 (2016) 160-166.
[17]	S. Longo, B.M. d’Antoni, M. Bongards, A. Chaparro, A. Cronrath, F. Fatone, J.M. Lema, M. Mauricio-Iglesias, A. Soares, A. Hospido, Monitoring and diagnosis of energy consumption in wastewater treatment plants. A state of the art and proposals for improvement, Appl. Energ. 179 (2016) 1251-1268.
[18]	D. Ghernaout, Water reuse (WR): The ultimate and vital solution for water supply issues, Intern. J. Sustain. Develop. Res. 3 (2017) 36-46.
[19]	D. Torregrossa, F. Hernández-Sancho, J. Hansen, A. Cornelissen, T. Popov, G. Schutz, Energy saving in wastewater treatment plants: A plant-generic cooperative decision support system, J. Clean. Prod. 167 (2017) 601-609.
[20]	D. Ghernaout, Increasing trends towards drinking water reclamation from treated wastewater, World J. Appl. Chem. 3 (2018) 1-9.
[21]	E. Benetto, D. Nguyen, T. Lohmann, B. Schmitt, P. Schosseler, Life cycle assessment of ecological sanitation system for small-scale wastewater treatment, Sci. Total Environ. 407 (2009) 1506-1516.
[22]	M. Meneses, J.C. Pasqualino, F. Castells, Environmental assessment of urban wastewater reuse: Treatment alternatives and applications, Chemosphere 81 (2010) 266-272.
[23]	Q.H. Zhang, X.C. Wang, J.Q. Xiong, R. Chen, B. Cao, Application of life cycle assessment for an evaluation of wastewater treatment and reuse project – Case study of Xi’an, China, Bioresource Technol. 101 (2010) 1421-1425.
[24]	WWAP (United Nations World Water Assessment Programme). 2014. The United Nations World Water Development Report 2014: Water and Energy. Paris, UNESCO, http://unesdoc.unesco.org/images/0022/002257/225741E.pdf (Accessed on 02/08/18).
[25]	US Environmental Protection Agency, Energy efficiency in water and wastewater facilities, A guide to developing and implementing greenhouse gas reduction programs, 2013, https://www.epa.gov/sites/production/files/2015-08/documents/wastewater-guide.pdf (Accessed on 01/08/18).
[26]	J.A. Barry, WATERGY: Energy and water efficiency in municipal water supply and wastewater treatment, cost-effective savings of water and energy, The Alliance to Save Energy, February 2007.
[27]	M. Schoen, T. Hawkins, X. Xue, C. Ma, J. Garland, N.J. Ashbolt, Technologic resilience assessment of coastal community water and wastewater service options, Sustain. Water Qual. Ecol. 6 (2015) 75-87.
[28]	F. Friedler, Process integration, modelling and optimisation for energy saving and pollution reduction, Appl. Therm. Eng. 30 (2010) 2270-2280.
[29]	J. Daw, K. Hallett, J. DeWolfe, I. Venner, Energy efficiency strategies for municipal wastewater treatment facilities, Technical Report, NREL/TP-7A30-53341, National Renewable Energy Laboratory, Golden, Colorado, January 2012, https://www.nrel.gov/docs/fy12osti/53341.pdf (Accessed on 02/08/18).
[30]	H. Bajaoui, Indicator of consumption rate per cubic meter per kilowatt, NWC Internal document (March, 2017).

Cite This Article

Plain Text BibTeX RIS

APA Style

Yasser Alshammari, Djamel Ghernaout, Mohamed Aichouni, Mabrouk Touahmia. (2019). Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Applied Engineering, 2(2), 60-71. https://doi.org/10.11648/j.ae.20180202.15

Copy | Download

ACS Style

Yasser Alshammari; Djamel Ghernaout; Mohamed Aichouni; Mabrouk Touahmia. Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Appl. Eng. 2019, 2(2), 60-71. doi: 10.11648/j.ae.20180202.15

Copy | Download

AMA Style

Yasser Alshammari, Djamel Ghernaout, Mohamed Aichouni, Mabrouk Touahmia. Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Appl Eng. 2019;2(2):60-71. doi: 10.11648/j.ae.20180202.15

Copy | Download

@article{10.11648/j.ae.20180202.15,
  author = {Yasser Alshammari and Djamel Ghernaout and Mohamed Aichouni and Mabrouk Touahmia},
  title = {Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools},
  journal = {Applied Engineering},
  volume = {2},
  number = {2},
  pages = {60-71},
  doi = {10.11648/j.ae.20180202.15},
  url = {https://doi.org/10.11648/j.ae.20180202.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ae.20180202.15},
  abstract = {In Saudi Arabia, as population growth increases, the need for safe drinking water is more and more increasing for both human use and industrial applications. These requires highly efficient processing plants that meet the growing needs of customers and their expectations of providing more service to all segments of the society at the lowest possible cost. On the other hand, these stations consume high amounts of energy in addition to the high maintenance and operating costs due to emergency breakdowns, which in turn result in lower production and the exit of some units from operation. This research aims to enhance the operational procedures of the stations and to study the possibility of reducing the high consumption of electric power and work to increase the performance of the plants by reducing the costs of maintenance and operation through the application of Quality Tools (QTs). This work focused on: (1) collecting data, equipment inventory, maintenance and operation costs and energy consumption rate of the equipment; (2) analyzing these data using the Seven QTs and the New QTs for Management and Planning; (3) finding solutions and presenting the results using the Minitab software; and, (4) the obtained results will be then generalized to the other stations in other Saudi Arabia regions.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools
AU  - Yasser Alshammari
AU  - Djamel Ghernaout
AU  - Mohamed Aichouni
AU  - Mabrouk Touahmia
Y1  - 2019/01/22
PY  - 2019
N1  - https://doi.org/10.11648/j.ae.20180202.15
DO  - 10.11648/j.ae.20180202.15
T2  - Applied Engineering
JF  - Applied Engineering
JO  - Applied Engineering
SP  - 60
EP  - 71
PB  - Science Publishing Group
SN  - 2994-7456
UR  - https://doi.org/10.11648/j.ae.20180202.15
AB  - In Saudi Arabia, as population growth increases, the need for safe drinking water is more and more increasing for both human use and industrial applications. These requires highly efficient processing plants that meet the growing needs of customers and their expectations of providing more service to all segments of the society at the lowest possible cost. On the other hand, these stations consume high amounts of energy in addition to the high maintenance and operating costs due to emergency breakdowns, which in turn result in lower production and the exit of some units from operation. This research aims to enhance the operational procedures of the stations and to study the possibility of reducing the high consumption of electric power and work to increase the performance of the plants by reducing the costs of maintenance and operation through the application of Quality Tools (QTs). This work focused on: (1) collecting data, equipment inventory, maintenance and operation costs and energy consumption rate of the equipment; (2) analyzing these data using the Seven QTs and the New QTs for Management and Planning; (3) finding solutions and presenting the results using the Minitab software; and, (4) the obtained results will be then generalized to the other stations in other Saudi Arabia regions.
VL  - 2
IS  - 2
ER  -

Copy | Download

Author Information

Yasser Alshammari

Mechanical Engineering Department, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia
Djamel Ghernaout

Chemical Engineering Department, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia
Mohamed Aichouni

Industrial Engineering Department, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia
Mabrouk Touahmia

Archetectural Engineering Department, College of Engineering, University of Ha’il, Ha’il, Saudi Arabia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yasser Alshammari, Djamel Ghernaout, Mohamed Aichouni, Mabrouk Touahmia. (2019). Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Applied Engineering, 2(2), 60-71. https://doi.org/10.11648/j.ae.20180202.15

Copy | Download

ACS Style

Yasser Alshammari; Djamel Ghernaout; Mohamed Aichouni; Mabrouk Touahmia. Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Appl. Eng. 2019, 2(2), 60-71. doi: 10.11648/j.ae.20180202.15

Copy | Download

AMA Style

Yasser Alshammari, Djamel Ghernaout, Mohamed Aichouni, Mabrouk Touahmia. Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools. Appl Eng. 2019;2(2):60-71. doi: 10.11648/j.ae.20180202.15

Copy | Download

@article{10.11648/j.ae.20180202.15,
  author = {Yasser Alshammari and Djamel Ghernaout and Mohamed Aichouni and Mabrouk Touahmia},
  title = {Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools},
  journal = {Applied Engineering},
  volume = {2},
  number = {2},
  pages = {60-71},
  doi = {10.11648/j.ae.20180202.15},
  url = {https://doi.org/10.11648/j.ae.20180202.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ae.20180202.15},
  abstract = {In Saudi Arabia, as population growth increases, the need for safe drinking water is more and more increasing for both human use and industrial applications. These requires highly efficient processing plants that meet the growing needs of customers and their expectations of providing more service to all segments of the society at the lowest possible cost. On the other hand, these stations consume high amounts of energy in addition to the high maintenance and operating costs due to emergency breakdowns, which in turn result in lower production and the exit of some units from operation. This research aims to enhance the operational procedures of the stations and to study the possibility of reducing the high consumption of electric power and work to increase the performance of the plants by reducing the costs of maintenance and operation through the application of Quality Tools (QTs). This work focused on: (1) collecting data, equipment inventory, maintenance and operation costs and energy consumption rate of the equipment; (2) analyzing these data using the Seven QTs and the New QTs for Management and Planning; (3) finding solutions and presenting the results using the Minitab software; and, (4) the obtained results will be then generalized to the other stations in other Saudi Arabia regions.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Improving Operational Procedures in Riyadh’s (Saudi Arabia) Water Treatment Plants Using Quality Tools
AU  - Yasser Alshammari
AU  - Djamel Ghernaout
AU  - Mohamed Aichouni
AU  - Mabrouk Touahmia
Y1  - 2019/01/22
PY  - 2019
N1  - https://doi.org/10.11648/j.ae.20180202.15
DO  - 10.11648/j.ae.20180202.15
T2  - Applied Engineering
JF  - Applied Engineering
JO  - Applied Engineering
SP  - 60
EP  - 71
PB  - Science Publishing Group
SN  - 2994-7456
UR  - https://doi.org/10.11648/j.ae.20180202.15
AB  - In Saudi Arabia, as population growth increases, the need for safe drinking water is more and more increasing for both human use and industrial applications. These requires highly efficient processing plants that meet the growing needs of customers and their expectations of providing more service to all segments of the society at the lowest possible cost. On the other hand, these stations consume high amounts of energy in addition to the high maintenance and operating costs due to emergency breakdowns, which in turn result in lower production and the exit of some units from operation. This research aims to enhance the operational procedures of the stations and to study the possibility of reducing the high consumption of electric power and work to increase the performance of the plants by reducing the costs of maintenance and operation through the application of Quality Tools (QTs). This work focused on: (1) collecting data, equipment inventory, maintenance and operation costs and energy consumption rate of the equipment; (2) analyzing these data using the Seven QTs and the New QTs for Management and Planning; (3) finding solutions and presenting the results using the Minitab software; and, (4) the obtained results will be then generalized to the other stations in other Saudi Arabia regions.
VL  - 2
IS  - 2
ER  -

Copy | Download