Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications

Emmanuel Ogundimu; Esther Akinlabi; Chigbo Mgbemene; Ifeanyi Jacobs

doi:doi:10.11648/j.ajmie.20210604.12

| Peer-Reviewed

Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications

Emmanuel Ogundimu, Esther Akinlabi, Chigbo Mgbemene, Ifeanyi Jacobs

Published in American Journal of Mechanical and Industrial Engineering (Volume 6, Issue 4)

Received: 14 July 2021 Accepted: 4 August 2021 Published: 7 September 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The rapid exhausting traditional energy sources and the contemporary constantly intensifying energy entreaty with respects to biological matters have reinforced concentrated research on solar energy novelty. Capturing maximum energy from the sun by applying photovoltaic solar technology is challenging. A limited feature that affect the solar energy harvest of such technology include the photovoltaic material, topographical area of solar irradiances, surrounding temperature and climate, the angle of sun and orientation of the panel. This work presents an automated and low-cost irradiance-temperature (W/m²) logging meter, Low-Cost Sensor (Pyranometer) to measure Solar Irradiance in Nsukka, Nigeria. The core distinctive of this device is the low-cost of all its mechanisms. The design of this device is grounded on by means of temperature sensor DHT11 and phototransistor PT202C. This design was implemented for the periods of 90 days along with standard pyranometer and thermometer installed to two 250 watts photovoltaic (PV) solar panel similar at University of Nigeria, Nsukka. This device enhanced sensitiveness to solar irradiance, permitting a brilliant feedback of the device in a range from approximately 250 to 1200 x10^-9 m. This device incapacitates out dated complications in this kind of device and propositions comparable features to those of thermopile-based irradiance meter and, hence, can be used at all setting up where consistent sizing of solar isolation is required and the overall result indicates that the coefficient of correlation of the solar isolation gotten with the projected device is 0.9996.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 6, Issue 4)
DOI	10.11648/j.ajmie.20210604.12
Page(s)	50-55
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Device, Low-cost, Phototransistor, Pyranometer, Solar Irradiance

References

[1]	F. G. Hidalgo, R. F. Martinez, and E. F. Vidal, “DESIG N OF A LOW-COST SENSOR FOR SOLAR IRRADIANCE,” pp. 1–8.
[2]	M. Z.. Jacobson, “Fundamentals of Atmospheric Science,” Standford Univ., 2005.
[3]	M. A. Martínez, J. M. Andújar, and J. M. Enrique, “A New and Inexpensive Pyranometer for the Visible Spectral Range,” pp. 4615–4634, 2009.
[4]	L. C.. B. W. E. Michalsky, J. J.; Harrison, “Cosine response characteristics of some radiometric and photometric sensors,” Sol. Energy 1995, vol. 4, 397–402, 1995.
[5]	C. Rus-Casas, L. Hontoria, J. I. Fernández-Carrasco, G. Jiménez-Castillo, and F. Muñoz-Rodríguez, “Development of a utility model for the measurement of global radiation in photovoltaic applications in the internet of things (IoT),” Electron., vol. 8, no. 3, 2019.
[6]	J. Cano, “Photovoltaic Modules : Effect of Tilt Angle on Soiling by Jose Cano A Thesis Presented in Partial Fulfillment of the Requirements for the Degree Master of Science in Technology Approved July 2011 by the Graduate Supervisory Committee : Govindasamy Tamizhm,” no. July, 2011.
[7]	M. Bellis, “The history of thermometer,” New York Times, 2011.
[8]	I. G. Saidu et al., “Design and Implimentation of a Microcontroller Based Digital Thermometer,” IOSR J. Environ. Sci. Toxicol. Food Technol., vol. 8, no. 2, pp. 119–125, 2014.
[9]	M. m. h. and f. Ahmed, “Design and construction of pc based digital thermometer,” ieee trans. instrum. meas., 2014.
[10]	I. Dutton, E. G.; Michalsky, J. J.; Stoffel, T.; Forgan, B. W.; Hickey, J.; Alberta, T. I.; Reda, “Measurement of broadband diffuse solar irradiance using current commercial instrumentation with a correction for thermal offset errors.,” J. Atmosph. Ocean. Tech., vol. 18, 297–31, 2001.
[11]	T.. M. D. Reda, I.; Stoffel, “A method to calibrate a solar pyranometer for measuring reference diffuse irradiance.,” Sol. Energy, vol. 74, 103–11, 2003.
[12]	D.. King, D. L.; Myers, “Silicon-Photodiode pyranometers: operational characteristics, historical experiences, and new calibration procedures.,” Proc. 26th PVSC, Anaheim, CA, USA, vol. pp. 1285-1, 1997.
[13]	E. O. Doebelin, “Measurements Systems, Application and Design.,” 4th ed.; McGraw Hill New York, NY, USA, Sensors, vol. 2009, 9, 2009.
[14]	SRMS, “Solar Platform of the West University of Timisoara, Timisoara, Romania.,” 2012.
[15]	S. KE, “The shadow band correction for diffuse irradiation based on a two-component sky radiance model.,” Sol Energy, vol. 39: 433–438, 1987.
[16]	Reda I, “Calibration of a solar absolute cavity radiometer with traceability to the world radiometric reference.,” Natl. Renew. Energy Lab. Golden, Color., vol. Tech. Rep., 1996.

Cite This Article

Plain Text BibTeX RIS

APA Style

Emmanuel Ogundimu, Esther Akinlabi, Chigbo Mgbemene, Ifeanyi Jacobs. (2021). Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. American Journal of Mechanical and Industrial Engineering, 6(4), 50-55. https://doi.org/10.11648/j.ajmie.20210604.12

Copy | Download

ACS Style

Emmanuel Ogundimu; Esther Akinlabi; Chigbo Mgbemene; Ifeanyi Jacobs. Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. Am. J. Mech. Ind. Eng. 2021, 6(4), 50-55. doi: 10.11648/j.ajmie.20210604.12

Copy | Download

AMA Style

Emmanuel Ogundimu, Esther Akinlabi, Chigbo Mgbemene, Ifeanyi Jacobs. Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. Am J Mech Ind Eng. 2021;6(4):50-55. doi: 10.11648/j.ajmie.20210604.12

Copy | Download

@article{10.11648/j.ajmie.20210604.12,
  author = {Emmanuel Ogundimu and Esther Akinlabi and Chigbo Mgbemene and Ifeanyi Jacobs},
  title = {Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {6},
  number = {4},
  pages = {50-55},
  doi = {10.11648/j.ajmie.20210604.12},
  url = {https://doi.org/10.11648/j.ajmie.20210604.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20210604.12},
  abstract = {The rapid exhausting traditional energy sources and the contemporary constantly intensifying energy entreaty with respects to biological matters have reinforced concentrated research on solar energy novelty. Capturing maximum energy from the sun by applying photovoltaic solar technology is challenging. A limited feature that affect the solar energy harvest of such technology include the photovoltaic material, topographical area of solar irradiances, surrounding temperature and climate, the angle of sun and orientation of the panel. This work presents an automated and low-cost irradiance-temperature (W/m2) logging meter, Low-Cost Sensor (Pyranometer) to measure Solar Irradiance in Nsukka, Nigeria. The core distinctive of this device is the low-cost of all its mechanisms. The design of this device is grounded on by means of temperature sensor DHT11 and phototransistor PT202C. This design was implemented for the periods of 90 days along with standard pyranometer and thermometer installed to two 250 watts photovoltaic (PV) solar panel similar at University of Nigeria, Nsukka. This device enhanced sensitiveness to solar irradiance, permitting a brilliant feedback of the device in a range from approximately 250 to 1200 x10-9 m. This device incapacitates out dated complications in this kind of device and propositions comparable features to those of thermopile-based irradiance meter and, hence, can be used at all setting up where consistent sizing of solar isolation is required and the overall result indicates that the coefficient of correlation of the solar isolation gotten with the projected device is 0.9996.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications
AU  - Emmanuel Ogundimu
AU  - Esther Akinlabi
AU  - Chigbo Mgbemene
AU  - Ifeanyi Jacobs
Y1  - 2021/09/07
PY  - 2021
N1  - https://doi.org/10.11648/j.ajmie.20210604.12
DO  - 10.11648/j.ajmie.20210604.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 50
EP  - 55
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20210604.12
AB  - The rapid exhausting traditional energy sources and the contemporary constantly intensifying energy entreaty with respects to biological matters have reinforced concentrated research on solar energy novelty. Capturing maximum energy from the sun by applying photovoltaic solar technology is challenging. A limited feature that affect the solar energy harvest of such technology include the photovoltaic material, topographical area of solar irradiances, surrounding temperature and climate, the angle of sun and orientation of the panel. This work presents an automated and low-cost irradiance-temperature (W/m2) logging meter, Low-Cost Sensor (Pyranometer) to measure Solar Irradiance in Nsukka, Nigeria. The core distinctive of this device is the low-cost of all its mechanisms. The design of this device is grounded on by means of temperature sensor DHT11 and phototransistor PT202C. This design was implemented for the periods of 90 days along with standard pyranometer and thermometer installed to two 250 watts photovoltaic (PV) solar panel similar at University of Nigeria, Nsukka. This device enhanced sensitiveness to solar irradiance, permitting a brilliant feedback of the device in a range from approximately 250 to 1200 x10-9 m. This device incapacitates out dated complications in this kind of device and propositions comparable features to those of thermopile-based irradiance meter and, hence, can be used at all setting up where consistent sizing of solar isolation is required and the overall result indicates that the coefficient of correlation of the solar isolation gotten with the projected device is 0.9996.
VL  - 6
IS  - 4
ER  -

Copy | Download

Author Information

Emmanuel Ogundimu

Department of Mechanical Engineering, University of Johannesburg, Johannesburg, South Africa
Esther Akinlabi

Department of Mechanical Engineering, University of Johannesburg, Johannesburg, South Africa
Chigbo Mgbemene

Department of Mechanical Engineering, University of Nigeria, Nsukka, Nigeria
Ifeanyi Jacobs

Department of Mechanical Engineering, University of Nigeria, Nsukka, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Emmanuel Ogundimu, Esther Akinlabi, Chigbo Mgbemene, Ifeanyi Jacobs. (2021). Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. American Journal of Mechanical and Industrial Engineering, 6(4), 50-55. https://doi.org/10.11648/j.ajmie.20210604.12

Copy | Download

ACS Style

Emmanuel Ogundimu; Esther Akinlabi; Chigbo Mgbemene; Ifeanyi Jacobs. Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. Am. J. Mech. Ind. Eng. 2021, 6(4), 50-55. doi: 10.11648/j.ajmie.20210604.12

Copy | Download

AMA Style

Emmanuel Ogundimu, Esther Akinlabi, Chigbo Mgbemene, Ifeanyi Jacobs. Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications. Am J Mech Ind Eng. 2021;6(4):50-55. doi: 10.11648/j.ajmie.20210604.12

Copy | Download

@article{10.11648/j.ajmie.20210604.12,
  author = {Emmanuel Ogundimu and Esther Akinlabi and Chigbo Mgbemene and Ifeanyi Jacobs},
  title = {Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {6},
  number = {4},
  pages = {50-55},
  doi = {10.11648/j.ajmie.20210604.12},
  url = {https://doi.org/10.11648/j.ajmie.20210604.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20210604.12},
  abstract = {The rapid exhausting traditional energy sources and the contemporary constantly intensifying energy entreaty with respects to biological matters have reinforced concentrated research on solar energy novelty. Capturing maximum energy from the sun by applying photovoltaic solar technology is challenging. A limited feature that affect the solar energy harvest of such technology include the photovoltaic material, topographical area of solar irradiances, surrounding temperature and climate, the angle of sun and orientation of the panel. This work presents an automated and low-cost irradiance-temperature (W/m2) logging meter, Low-Cost Sensor (Pyranometer) to measure Solar Irradiance in Nsukka, Nigeria. The core distinctive of this device is the low-cost of all its mechanisms. The design of this device is grounded on by means of temperature sensor DHT11 and phototransistor PT202C. This design was implemented for the periods of 90 days along with standard pyranometer and thermometer installed to two 250 watts photovoltaic (PV) solar panel similar at University of Nigeria, Nsukka. This device enhanced sensitiveness to solar irradiance, permitting a brilliant feedback of the device in a range from approximately 250 to 1200 x10-9 m. This device incapacitates out dated complications in this kind of device and propositions comparable features to those of thermopile-based irradiance meter and, hence, can be used at all setting up where consistent sizing of solar isolation is required and the overall result indicates that the coefficient of correlation of the solar isolation gotten with the projected device is 0.9996.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Design and Implementation of a Low-cost Irradiance - Temperature Data Logging Meter for Solar PV Applications
AU  - Emmanuel Ogundimu
AU  - Esther Akinlabi
AU  - Chigbo Mgbemene
AU  - Ifeanyi Jacobs
Y1  - 2021/09/07
PY  - 2021
N1  - https://doi.org/10.11648/j.ajmie.20210604.12
DO  - 10.11648/j.ajmie.20210604.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 50
EP  - 55
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20210604.12
AB  - The rapid exhausting traditional energy sources and the contemporary constantly intensifying energy entreaty with respects to biological matters have reinforced concentrated research on solar energy novelty. Capturing maximum energy from the sun by applying photovoltaic solar technology is challenging. A limited feature that affect the solar energy harvest of such technology include the photovoltaic material, topographical area of solar irradiances, surrounding temperature and climate, the angle of sun and orientation of the panel. This work presents an automated and low-cost irradiance-temperature (W/m2) logging meter, Low-Cost Sensor (Pyranometer) to measure Solar Irradiance in Nsukka, Nigeria. The core distinctive of this device is the low-cost of all its mechanisms. The design of this device is grounded on by means of temperature sensor DHT11 and phototransistor PT202C. This design was implemented for the periods of 90 days along with standard pyranometer and thermometer installed to two 250 watts photovoltaic (PV) solar panel similar at University of Nigeria, Nsukka. This device enhanced sensitiveness to solar irradiance, permitting a brilliant feedback of the device in a range from approximately 250 to 1200 x10-9 m. This device incapacitates out dated complications in this kind of device and propositions comparable features to those of thermopile-based irradiance meter and, hence, can be used at all setting up where consistent sizing of solar isolation is required and the overall result indicates that the coefficient of correlation of the solar isolation gotten with the projected device is 0.9996.
VL  - 6
IS  - 4
ER  -

Copy | Download