Poly (2-hydroxyethyl methacrylate) PHEMA monolithic cryogels were synthesized by free radical polymerization at -12°C for 18 hours and produced spongy, elastic and macroporous gel matrix. Scanning Electron Microscopy (SEM) measured structural properties of PHEMA monolithic cryogel matrix to visualize pore morphology. Mechanical properties of PHEMA monolithic cryogel such as storage modulus, compressive modulus, and creep test were measured with Dynamic mechanical analyzer (DMA). The PHEMA monolithic cryogel matrix shows ~ 97% recovery after 70% compression of cryogel and has a compressive modulus of 1.8kPa to 8.5kPa.
| Published in | International Journal of Biomedical Materials Research (Volume 3, Issue 4) |
| DOI | 10.11648/j.ijbmr.20150304.12 |
| Page(s) | 46-55 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2015. Published by Science Publishing Group |
Macroporous Cryogel, Poly (2-Hydroxyethyl Methacrylate), Mechanical Properties, Creep Test, Compressive Modulus
| [1] | Arvidsson, P., et al., Chromatography of microbial cells using continuous supermacroporous affinity and ion-exchange columns. Journal of Chromatography A, 2002. 977(1): p. 27-38. |
| [2] | Plieva, F. M., et al., Pore structure in supermacroporous polyacrylamide based cryogels. Soft Matter, 2005. 1(4): p. 303-309. |
| [3] | Dainiak, M. B., et al., Integrated isolation of antibody fragments from microbial cell culture fluids using supermacroporous cryogels. Journal of Chromatography A, 2004. 1045(1-2): p. 93-98. |
| [4] | Arvidsson, P., et al., Direct chromatographic capture of enzyme from crude homogenate using immobilized metal affinity chromatography on a continuous supermacroporous adsorbent. Journal of Chromatography A, 2003. 986(2): p. 275-90. |
| [5] | Plieva, F. M., H. Kirsebom, and B. Mattiasson, Preparation of macroporous cryostructurated gel monoliths, their characterization and main applications. Journal of Separation Science, 2011. 34(16-17): p. 2164-2172. |
| [6] | Bowers, R. W. J. and B. J. Tighe, Studies of the ocular compatibility of hydrogels. A review of the clinical manifestations of spoliation. Biomaterials, 1987. 8(2): p. 83-IN1. |
| [7] | Rosiak, J., J. Olejniczak, and W. Pakala, Fast reaction of irradiated polymers. Crosslinking and degradation of polyvinylpyrrolidone. International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry, 1990. 36(6): p. 747-755. |
| [8] | Dziubla, T. D., et al., Evaluation of porous networks of poly(2-hydroxyethyl methacrylate) as interfacial drug delivery devices. Biomaterials, 2001. 22(21): p. 2893-2899. |
| [9] | Bajpai, A. K. and M. Shrivastava, Water sorption dynamics of a binary copolymeric hydrogel of 2-hydroxyethyl methacrylate (HEMA). Journal of Biomaterials Science, Polymer Edition, 2002. 13(3): p. 237-256. |
| [10] | Lozinsky, V. I., et al., Polymeric cryogels as promising materials of biotechnological interest. Trends in Biotechnology, 2003. 21(10): p. 445-451. |
| [11] | Savina, I. N., et al., Porous structure and water state in cross-linked polymer and protein cryo-hydrogels. Soft Matter, 2011. 7(9): p. 4276-4283. |
| [12] | Ertürk, G. and B. Mattiasson, Cryogels-versatile tools in bioseparation. Journal of Chromatography A, 2014. 1357: p. 24-35. |
| [13] | Gun'ko, V. M., I. N. Savina, and S. V. Mikhalovsky, Cryogels: morphological, structural and adsorption characterisation. Adv Colloid Interface Sci, 2013. 187-188: p. 1-46. |
| [14] | Hanora, A., et al., Screening of peptide affinity tags using immobilised metal affinity chromatography in 96-well plate format. Journal of Chromatography A, 2005. 1087(1–2): p. 38-44. |
| [15] | Le Noir, M., et al., Macroporous molecularly imprinted polymer/cryogel composite systems for the removal of endocrine disrupting trace contaminants. Journal of Chromatography A, 2007. 1154(1–2): p. 158-164. |
| [16] | Ingavle, G. C., et al., Affinity binding of antibodies to supermacroporous cryogel adsorbents with immobilized protein A for removal of anthrax toxin protective antigen. Biomaterials, 2015. 50: p. 140-153. |
| [17] | Hajizadeh, S. and B. Mattiasson, Cryogels with Affinity Ligands as Tools in Protein Purification, in Affinity Chromatography, S. Reichelt, Editor. 2015, Springer New York. p. 183-200. |
| [18] | Plieva , F., et al., Macroporous elastic polyacrylamide gels prepared at subzero temperatures: control of porous structure. Journal of Materials Chemistry, 2006. 16(41): p. 4065-4073. |
| [19] | Jones, D. S., et al., Pharmaceutical applications of dynamic mechanical thermal analysis. Advanced Drug Delivery Reviews, 2012. 64(5): p. 440-448. |
| [20] | Jones, D. S., A. D. Woolfson, and A. F. Brown, Textural, viscoelastic and mucoadhesive properties of pharmaceutical gels composed of cellulose polymers. International Journal of Pharmaceutics, 1997. 151(2): p. 223-233. |
| [21] | Ferry, J. D., Viscoelastic Properties of Polymers. 1980: John Wiley and Sons. |
| [22] | Ward , I. M. and D. W. Hardley An introduction to the mechanical properties of solid polymers. 1993: John Wiley and sons. |
| [23] | Jones, D. S., Dynamic mechanical analysis of polymeric systems of pharmaceutical and biomedical significance. International Journal of Pharmaceutics, 1999. 179(2): p. 167-178. |
| [24] | Barnes, H. A., J. F. Hutton, and K. Walters, An introduction to rheology. 1996: Elsevier. |
| [25] | Craig, D. Q. M. and F. A. Johnson, Pharmaceutical applications of dynamic mechanical thermal analysis. Thermochimica Acta, 1995. 248: p. 97-115. |
| [26] | Patfoort, G., An introduction to physical , mechanical and rheological behaviour. 1974: Story -Scientia , Gent. |
| [27] | Denizli, A., R. Say, and E. Piskin, Removal of aluminium by Alizarin Yellow-attached magnetic poly(2-hydroxyethyl methacrylate) beads. Reactive and Functional Polymers, 2003. 55(1): p. 99-107. |
| [28] | Hollister, S. J., Porous scaffold design for tissue engineering. Nature Materials, 2005. 4(7): p. 518-524. |
| [29] | Dainiak, M. B., et al., Detachment of affinity-captured bioparticles by elastic deformation of a macroporous hydrogel. Proceedings of the National Academy of Sciences, 2006. 103(4): p. 849-854. |
| [30] | Casahoursat, L., G. Lemagnen, and D. Larrouture, The Use of Stress Relaxation Trials to Characterize Tablet Capping. Drug Development and Industrial Pharmacy, 1988. 14(15-17): p. 2179-2199. |
APA Style
Wuraola Akande, Lyuba Mikhalovska, Stuart James, Sergey Mikhalovsky. (2015). Poly (2-Hydroxyethyl Methacrylate) Macroporous Cryogel for Extracorporeal Medical Devices. International Journal of Biomedical Materials Research, 3(4), 46-55. https://doi.org/10.11648/j.ijbmr.20150304.12
ACS Style
Wuraola Akande; Lyuba Mikhalovska; Stuart James; Sergey Mikhalovsky. Poly (2-Hydroxyethyl Methacrylate) Macroporous Cryogel for Extracorporeal Medical Devices. Int. J. Biomed. Mater. Res. 2015, 3(4), 46-55. doi: 10.11648/j.ijbmr.20150304.12
AMA Style
Wuraola Akande, Lyuba Mikhalovska, Stuart James, Sergey Mikhalovsky. Poly (2-Hydroxyethyl Methacrylate) Macroporous Cryogel for Extracorporeal Medical Devices. Int J Biomed Mater Res. 2015;3(4):46-55. doi: 10.11648/j.ijbmr.20150304.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijbmr.20150304.12,
author = {Wuraola Akande and Lyuba Mikhalovska and Stuart James and Sergey Mikhalovsky},
title = {Poly (2-Hydroxyethyl Methacrylate) Macroporous Cryogel for Extracorporeal Medical Devices},
journal = {International Journal of Biomedical Materials Research},
volume = {3},
number = {4},
pages = {46-55},
doi = {10.11648/j.ijbmr.20150304.12},
url = {https://doi.org/10.11648/j.ijbmr.20150304.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijbmr.20150304.12},
abstract = {Poly (2-hydroxyethyl methacrylate) PHEMA monolithic cryogels were synthesized by free radical polymerization at -12°C for 18 hours and produced spongy, elastic and macroporous gel matrix. Scanning Electron Microscopy (SEM) measured structural properties of PHEMA monolithic cryogel matrix to visualize pore morphology. Mechanical properties of PHEMA monolithic cryogel such as storage modulus, compressive modulus, and creep test were measured with Dynamic mechanical analyzer (DMA). The PHEMA monolithic cryogel matrix shows ~ 97% recovery after 70% compression of cryogel and has a compressive modulus of 1.8kPa to 8.5kPa.},
year = {2015}
}
TY - JOUR T1 - Poly (2-Hydroxyethyl Methacrylate) Macroporous Cryogel for Extracorporeal Medical Devices AU - Wuraola Akande AU - Lyuba Mikhalovska AU - Stuart James AU - Sergey Mikhalovsky Y1 - 2015/08/19 PY - 2015 N1 - https://doi.org/10.11648/j.ijbmr.20150304.12 DO - 10.11648/j.ijbmr.20150304.12 T2 - International Journal of Biomedical Materials Research JF - International Journal of Biomedical Materials Research JO - International Journal of Biomedical Materials Research SP - 46 EP - 55 PB - Science Publishing Group SN - 2330-7579 UR - https://doi.org/10.11648/j.ijbmr.20150304.12 AB - Poly (2-hydroxyethyl methacrylate) PHEMA monolithic cryogels were synthesized by free radical polymerization at -12°C for 18 hours and produced spongy, elastic and macroporous gel matrix. Scanning Electron Microscopy (SEM) measured structural properties of PHEMA monolithic cryogel matrix to visualize pore morphology. Mechanical properties of PHEMA monolithic cryogel such as storage modulus, compressive modulus, and creep test were measured with Dynamic mechanical analyzer (DMA). The PHEMA monolithic cryogel matrix shows ~ 97% recovery after 70% compression of cryogel and has a compressive modulus of 1.8kPa to 8.5kPa. VL - 3 IS - 4 ER -
Information
Email: