-
Research Article
Study on the Effect of Extraction Parameters and Precipitation Solvents on Pectin Yield from Lemon Peels
Asaye Dessie*
,
Lami Amanuel
,
Ashenafi Alebachew
Issue:
Volume 10, Issue 3, September 2025
Pages:
50-59
Received:
4 August 2025
Accepted:
15 August 2025
Published:
3 September 2025
Abstract: This study was aimed to extract pectin from lemon peel and investigates factors affecting the percentage yield of pectin. Pectin is extensively employed in a variety of food processing procedures as a gelling agent, thickening, emulsifier, and stabilizer. Chemically, it is a polysaccharide, which is a compound that all land plants' cell walls contain in varying amounts. The extraction conditions, such as extraction time, temperature, pH, MLR, and type of extraction solvents, significantly affect the yield of pectin. Pectin was extracted with acid hydrolysis techniques and the extracts were then precipitated with methanol, ethanol and acetone solvents and the effects of these factors on pectin yield were studied. Optimization of extraction parameters has been carried out with OFAT experimental design based on maximum yield. Higher yield of pectin were obtain at extraction temperature of 90°C (36.5%), extraction time of 90 min (38%), material-to-liquor ratio of 1:40 (34.75%) and pH of 2 (31%). Ethanol precipitation has given higher pectin yield than methanol and acetone. The extracted pectin was characterized for its chemical composition, solubility of dry pectin in cold and hot water and alkali, color and thermal properties. It was revealed from this study that dry pectin dissolves in hot water and alkali as well as in cold alkali. The extracted pectin shown moisture content of 13.4%, volatile compounds of 82.3%, ash content of 3.1%, fixed carbon of 14.6% and pH of 3.5 at 30°C were obtained. Hence, it can be concluded that the citrus lemon peel is a potential source of pectin for commercial purpose.
Abstract: This study was aimed to extract pectin from lemon peel and investigates factors affecting the percentage yield of pectin. Pectin is extensively employed in a variety of food processing procedures as a gelling agent, thickening, emulsifier, and stabilizer. Chemically, it is a polysaccharide, which is a compound that all land plants' cell walls conta...
Show More
-
Research Article
Formulation of Organic Pest Control from Garlic, Onion and Chili and Its Application on Cabbage Plant
Issue:
Volume 10, Issue 3, September 2025
Pages:
60-65
Received:
11 August 2025
Accepted:
20 August 2025
Published:
8 September 2025
Abstract: The increasing reliance on chemical insecticides in agriculture has significantly boosted food production by controlling pest populations, yet this approach has also triggered serious ecological consequences including the loss of beneficial organisms and the emergence of resistant insect species. This study investigates a plant-based organic pest control formulation derived from garlic (Allium sativum), onion (Allium cepa), and chili (Capsicum frutescens) as a sustainable alternative for managing major insect pests in cabbage (Brassica oleracea). Target pests include the cabbage aphid (Brevicoryne brassicae), cabbage webworm (Hellula undalis), cabbage white butterfly (Pieris brassicae), and diamondback moth (Plutella xylostella), all of which threaten cabbage yield by infesting crops during various growth stages. Visual observations and insect count data taken from ten leaves per plant across five replicates revealed a 68% reduction in aphid populations and a 62% decrease in diamondback moth larvae two weeks post-treatment. These results affirm the efficacy of the organic spray, which leverages the insecticidal properties of bioactive compounds naturally present in garlic and chili. The formulation demonstrated pest-repelling capabilities without harming cabbage plants or beneficial insects, supporting its potential integration into sustainable pest management systems. The biodegradable nature of the spray, combined with its low environmental toxicity, aligns with the principles of integrated pest management (IPM) and contributes to reduced dependence on synthetic chemicals. These findings support the broader adoption of botanical pesticides as an eco-friendly strategy to maintain crop productivity, promote biodiversity, and enhance food safety.
Abstract: The increasing reliance on chemical insecticides in agriculture has significantly boosted food production by controlling pest populations, yet this approach has also triggered serious ecological consequences including the loss of beneficial organisms and the emergence of resistant insect species. This study investigates a plant-based organic pest c...
Show More
-
Research Article
Pre-Extension Demonstration of Soil Test Based Recommended P-Fertilizer Rate for Bread Wheat at Gechi Districts of Buno Bedele Zone, Oromia Regional State, Ethiopia
Dechasa Mengistu*
,
Suleiman Aman
Issue:
Volume 10, Issue 3, September 2025
Pages:
66-70
Received:
8 August 2025
Accepted:
26 August 2025
Published:
23 September 2025
Abstract: Wheat is a major crop grown in the highlands of Ethiopia, especially in the study area, which is a key food source. In 2020, a pre-extension demonstration was carried out in Gechi district of Buno Bedele Zone to show how soil testing can help decide the right amount of phosphorus fertilizer for bread wheat. The study aimed to look at how much wheat is produced and how profitable it is when using phosphorus fertilizer based on soil testing results, and to teach farmers about using fertilizer rates that are specific to their fields. Two types of fertilizer plans were tested: one based on general recommendations that farmers usually follow, and another based on soil testing results. The improved bread wheat variety called Liban was used. The demonstration took place on one FTC and 10 fields owned by farmers, with each treated area being 12 meters by 20 meters. The rows were spaced 20 cm apart and the right amount of seeds and nitrogen fertilizer was used as recommended for the area. A field visit was held for 59 people when the wheat was ready to be harvested. The best yield came from the method that used soil test results, giving more than a 49.54 increase in grain production compared to the general recommendation. Also, the economic analysis showed that, the highest average profit was made with the soil testing method, earning 40,112.7 Ethiopian birr. Therefore, it is important to start scaling up the use of soil test based phosphorus fertilizer recommendations for bread wheat in the study area, and similar agro ecology.
Abstract: Wheat is a major crop grown in the highlands of Ethiopia, especially in the study area, which is a key food source. In 2020, a pre-extension demonstration was carried out in Gechi district of Buno Bedele Zone to show how soil testing can help decide the right amount of phosphorus fertilizer for bread wheat. The study aimed to look at how much wheat...
Show More
-
Research Article
Participatory Evaluation and Demonstration of Agricultural Lime with Site Specific NPS Fertilizer on Wheat Production and Amelioration of Soil Acidity at Burka Jiren Watershed
Bati Dube*
,
Dagne Chimdessa,
Gedefa Sori,
Dechasa Mengistu,
Amanuel Kejela,
Mosisa Mezgebu,
Suliema Aman
,
Belay Beyene
Issue:
Volume 10, Issue 3, September 2025
Pages:
71-77
Received:
15 August 2025
Accepted:
28 August 2025
Published:
25 September 2025
Abstract: Soil acidity is among the major soil fertility bottlenecks causing low crop productivity worldwide. The addition of agricultural lime is used to mitigate soil acidity. Therefore, this study was conducted to Participatory evaluation and demonstration of Agricultural Lime with Site specific NPS Fertilizer on wheat production and Amelioration of soil Acidity at Burka jiren community watershed. The experiment was implemented during 2024 crop season in Gechi district at Burka Jiren community watershed. The treatments was consisted two level; T1= Recommendation 100% of P2O5 from NPS without Lime application, T2= Recommendation 100% of P2O5 from NPS with Recommended Agricultural lime and the recommended N fertilizer rate of 92 kg ha-1 was used for each treatment at equal ratio. The collected data was analyzed using T-test and interpreted as mean and standard deviation by SAS software version 9.0. Results indicated that the grain yield of bread wheat was significance (P<0.05) influenced between two treatments. The highest grain yield (28.167 qt/ha) was recorded from treatment two which treated by agricultural lime with site specific NPS fertilizer. However the lowest grain yield (11.25 qt/ha) was obtained from NPS fertilizer alone. The application of agricultural lime significantly increased the mean of soil pH from 5.07 to 5.57. Both treatments presented similar levels of organic carbon and total nitrogen. Farmers in the Burka Jiren community watershed should consider integrating agricultural lime with site specific NPS fertilizer to mitigate soil acidity and enhance crop productivity.
Abstract: Soil acidity is among the major soil fertility bottlenecks causing low crop productivity worldwide. The addition of agricultural lime is used to mitigate soil acidity. Therefore, this study was conducted to Participatory evaluation and demonstration of Agricultural Lime with Site specific NPS Fertilizer on wheat production and Amelioration of soil ...
Show More
-
Review Article
A Comprehensive Review: Printing Auxiliaries and Applications in Textile Pigment Printing
Asaye Dessie Wolela*
Issue:
Volume 10, Issue 3, September 2025
Pages:
78-89
Received:
8 August 2025
Accepted:
21 August 2025
Published:
30 September 2025
Abstract: Pigment printing is the most popular method of printing all over the world. More than 80% of the printed goods are based on pigment printing. In principle, all types of fibers can be printed in pigment printing. Printing paste is the main constituent of printing which enables the formation of the predefined patterns. The printing paste for pigment printing generally contains pigments, emulsifiers, binders, softeners, thickeners, antifoaming agents, and crosslinking agents. The use of different auxiliaries depends upon various parameters such as style of printing, substrate to be printed, and dyes used for printing etc. Therefore it is necessary to give individual consideration to each of the printing paste constituents. Accordingly, an insight into the printing auxiliaries and their role in pigment printing was made in this paper. Besides, process of pigment printing, composition of printing paste, mechanism of printing, characteristics of pigment printing, and features of printing auxiliaries were discussed briefly. Furthermore, advantages and disadvantages of pigment printing were discussed in this paper. Textile auxiliaries play a vital role in the final outcome of a good quality printed product.
Abstract: Pigment printing is the most popular method of printing all over the world. More than 80% of the printed goods are based on pigment printing. In principle, all types of fibers can be printed in pigment printing. Printing paste is the main constituent of printing which enables the formation of the predefined patterns. The printing paste for pigment ...
Show More