Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear

Tang Rui; Ling Yun

doi:doi:10.11648/j.ae.20200402.15

| Peer-Reviewed

Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear

Tang Rui, Ling Yun

Published in Applied Engineering (Volume 4, Issue 2)

Received: 14 April 2020 Accepted: 6 May 2020 Published: 30 October 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.

Published in	Applied Engineering (Volume 4, Issue 2)
DOI	10.11648/j.ae.20200402.15
Page(s)	55-62
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Circular-Arc-Tooth-Trace Cylindrical Gear, Model Simplification, Bending Strength, Meshing Performance

References

[1]	Sun xiaowei. Characteristics and machining methods of arc-tooth gear [J]. Mechanical engineer, 1999 (8): 22-22.
[2]	Song aiping, wu weiwei, noble, gao wenjie. Ideal geometric parameters and machining method of cylindrical gear with arc teeth [J]. Journal of Shanghai jiao tong university, 2010, 44 (12). 1735-1740.
[3]	F. l. Litvin. Gear Geometry and Applied Theory [M]. Shanghai: Shanghai science and technology press, 2008.
[4]	Xu d x, pan J s. design of cylindrical gear with curved teeth [J]. Mining machinery, 1990 (9): 49-52.
[5]	Li f s, Lin z g, Yin z f. design of non-circular gears and special gears [M]. Beijing: China machine press, 1983 (8): 226-240.
[6]	Koga Tamotsu. Method for Cutting Paired Gears having Arcuate Tooth Trace [P]. American: US003915060, 1975.
[7]	Zhu xiaolu, e zhongkai, CAI chunyuan et al. Analysis of gear bearing capacity [M]. Beijing: higher education press, 1992 (8): 191-203.
[8]	Wu weiwei, song aiping, wang zhaolei. Analysis of tooth root stress of involute cylindrical gear [J]. Mechanical design and manufacturing, 2009 (11): 228
[9]	Zou min. Parameter calculation and selection of circular circular gear [J]. Mechanical design and research, 2000, 2: 36-38.
[10]	Tang jin-yuan, Chen xing-ming, luo cai-wang. Contact analysis of cylindrical gear considering tooth modification and installation error [J]. Journal of central south university (natural science edition), 2012, 43 (5): 1703-1709.

Cite This Article

Plain Text BibTeX RIS

APA Style

Tang Rui, Ling Yun. (2020). Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Applied Engineering, 4(2), 55-62. https://doi.org/10.11648/j.ae.20200402.15

Copy | Download

ACS Style

Tang Rui; Ling Yun. Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Appl. Eng. 2020, 4(2), 55-62. doi: 10.11648/j.ae.20200402.15

Copy | Download

AMA Style

Tang Rui, Ling Yun. Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Appl Eng. 2020;4(2):55-62. doi: 10.11648/j.ae.20200402.15

Copy | Download

@article{10.11648/j.ae.20200402.15,
  author = {Tang Rui and Ling Yun},
  title = {Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear},
  journal = {Applied Engineering},
  volume = {4},
  number = {2},
  pages = {55-62},
  doi = {10.11648/j.ae.20200402.15},
  url = {https://doi.org/10.11648/j.ae.20200402.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ae.20200402.15},
  abstract = {Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear
AU  - Tang Rui
AU  - Ling Yun
Y1  - 2020/10/30
PY  - 2020
N1  - https://doi.org/10.11648/j.ae.20200402.15
DO  - 10.11648/j.ae.20200402.15
T2  - Applied Engineering
JF  - Applied Engineering
JO  - Applied Engineering
SP  - 55
EP  - 62
PB  - Science Publishing Group
SN  - 2994-7456
UR  - https://doi.org/10.11648/j.ae.20200402.15
AB  - Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.
VL  - 4
IS  - 2
ER  -

Copy | Download

Author Information

Tang Rui

Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China
Ling Yun

Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Tang Rui, Ling Yun. (2020). Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Applied Engineering, 4(2), 55-62. https://doi.org/10.11648/j.ae.20200402.15

Copy | Download

ACS Style

Tang Rui; Ling Yun. Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Appl. Eng. 2020, 4(2), 55-62. doi: 10.11648/j.ae.20200402.15

Copy | Download

AMA Style

Tang Rui, Ling Yun. Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear. Appl Eng. 2020;4(2):55-62. doi: 10.11648/j.ae.20200402.15

Copy | Download

@article{10.11648/j.ae.20200402.15,
  author = {Tang Rui and Ling Yun},
  title = {Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear},
  journal = {Applied Engineering},
  volume = {4},
  number = {2},
  pages = {55-62},
  doi = {10.11648/j.ae.20200402.15},
  url = {https://doi.org/10.11648/j.ae.20200402.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ae.20200402.15},
  abstract = {Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear
AU  - Tang Rui
AU  - Ling Yun
Y1  - 2020/10/30
PY  - 2020
N1  - https://doi.org/10.11648/j.ae.20200402.15
DO  - 10.11648/j.ae.20200402.15
T2  - Applied Engineering
JF  - Applied Engineering
JO  - Applied Engineering
SP  - 55
EP  - 62
PB  - Science Publishing Group
SN  - 2994-7456
UR  - https://doi.org/10.11648/j.ae.20200402.15
AB  - Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.
VL  - 4
IS  - 2
ER  -

Copy | Download