Abstract: Biomass power plants play a crucial role in the sustainable energy sector by converting organic materials such as agricultural residues, forest biomass, and dedicated energy crops into electricity and heat. Biomass power plants represent a viable and renewable energy solution that can contribute to transitioning to a low-carbon economy. Their ability to convert organic materials into electricity and heat, coupled with proper management of feedstocks and emissions, can provide a sustainable alternative to fossil fuel-based power generation. Biomass has appeared as one of the most encouraging renewable energy sources for the replacement of fossil fuels. An extensive study about the prospective of biomass to produce renewable energy in the world has been exhibited in this article. The biomass-driven combined heat and power plant demonstrates 67% and 12% efficiency improvement compared to the stand-alone biomass power plant. BFP-CCS performs best at the H2O/Mn2O3 mass ratio of 1.6, the H2O/O2 molar ratio of 2.8, the O2/biomass mass ratio of 0.22, and the fuel utilization factor of 0.65. The exergo-economic and exergo-environmental factors obtained are 51.5% and 0.0288% respectively at the favorable operating conditions. The round-trip efficiency of the process using R1233zd was 8.77%, which was slightly lower than that of the process using R245fa (8.84%). The net power output of the final CLC integrated configuration and conventional power plants are 492.19 kW and 273.12 kW respectively. A lot of energy can be recovered without low-temperature corrosion problems, and 7% of the total input energy can be saved. The maximum obtainable exergy efficiency was 42.03%, which was related to MSW (Municipal Solid Waste). The primary aim of this review is to furnish a thorough understanding of the thermodynamic complexities and potential improvements within biomass power plants. Through a critical analysis of current research and emerging technologies, this review aims to establish the groundwork for more effective and sustainable energy production from biomass, playing a crucial role in shaping a cleaner and more environmentally friendly future.
Abstract: Biomass power plants play a crucial role in the sustainable energy sector by converting organic materials such as agricultural residues, forest biomass, and dedicated energy crops into electricity and heat. Biomass power plants represent a viable and renewable energy solution that can contribute to transitioning to a low-carbon economy. Their abili...Show More
Abstract: Natural fiber-reinforced composites are becoming a growing trend because of their affordability, sustainability, abundant natural source, and minimal environmental effect. It has also shown to be an effective replacement of synthetic fiber, particularly in the transportation and construction sectors as ceiling, paneling, partition etc. In this study the jute fiber (Hessian Cloth) reinforced (10% to 50% fiber content by weight) Polypropylene (PP) and Polyethylene (PE) composite were made by compression molding technique to understand the effect of fiber loading on mechanical properties of two different thermoplastic composite materials. For jute fabric-reinforced thermoplastic composites, it was discovered that with 30 % fiber loading with PP and PE yielded the best results. It was found that the mechanical properties of the composites enhanced significantly with 30 % fiber content with PP and PE thermoplastic matrixes in contrast to 10% and 20% fiber content composites. However, increasing the fiber content over 30%, dramatically decrease the mechanical properties of the composite samples. The relationship between Tensile Strength (TS), Bending Strength (BS), Impact Strength (IS) and Tensile Modulus (TM), Bending Modulus (BM) was examined, along with water resistance properties for both composites. Additionally, the jute-reinforced polypropylene (PP) composite showed superior mechanical capabilities compared to the jute-polyethylene (PE) composite. This suggests that it could be a suitable replacement for the toy manufacturing, home or garden furniture, automotive and interior construction industries in the future.
Abstract: Natural fiber-reinforced composites are becoming a growing trend because of their affordability, sustainability, abundant natural source, and minimal environmental effect. It has also shown to be an effective replacement of synthetic fiber, particularly in the transportation and construction sectors as ceiling, paneling, partition etc. In this stud...Show More